The RecursiveIteratorIterator class
Введение
...
Class synopsis
Содержание
- RecursiveIteratorIterator::current — Access the current element value
- RecursiveIteratorIterator::getDepth — Get the current depth of the recursive iteration
- RecursiveIteratorIterator::getSubIterator — The current active sub iterator
- RecursiveIteratorIterator::key — Access the current key
- RecursiveIteratorIterator::next — Move forward to the next element
- RecursiveIteratorIterator::rewind — Rewind the iterator to the first element of the top level inner iterator
- RecursiveIteratorIterator::valid — Check whether the current position is valid
Коментарии
You can use this to quickly find all the files (recursively) in a certain directory. This beats maintaining a stack yourself.<?php
$directory = "/tmp/";
$fileSPLObjects = new RecursiveIteratorIterator(
new RecursiveDirectoryIterator($directory),
RecursiveIteratorIterator::CHILD_FIRST
);
try {
foreach( $fileSPLObjects as $fullFileName => $fileSPLObject ) {
print $fullFileName . " " . $fileSPLObject->getFilename() . "\n";
}
}
catch (UnexpectedValueException $e) {
printf("Directory [%s] contained a directory we can not recurse into", $directory);
}
?>
Note: if there is a directory contained within the directory you are searching in that you have no access to read an UnexpectedValueException will be thrown (leaving you with an empty list).
Note: objects returned are SPLFileObjects
This example demonstrates using the getDepth() method with a RecursiveArrayIterator.
<?php
$tree = array();
$tree[1][2][3] = 'lemon';
$tree[1][4] = 'melon';
$tree[2][3] = 'orange';
$tree[2][5] = 'grape';
$tree[3] = 'pineapple';
print_r($tree);
$arrayiter = new RecursiveArrayIterator($tree);
$iteriter = new RecursiveIteratorIterator($arrayiter);
foreach ($iteriter as $key => $value) {
$d = $iteriter->getDepth();
echo "depth=$d k=$key v=$value\n";
}
?>
The output of this would be:
Array
(
[1] => Array
(
[2] => Array
(
[3] => lemon
)
[4] => melon
)
[2] => Array
(
[3] => orange
[5] => grape
)
[3] => pineapple
)
depth=2 k=3 v=lemon
depth=1 k=4 v=melon
depth=1 k=3 v=orange
depth=1 k=5 v=grape
depth=0 k=3 v=pineapple
This class operates on a tree of elements, which is build by nesting recursive iterators into one another.
Thus you might say it is an iterator over iterators. While traversing those, the class pushes the iterators on a stack while traversing down to a leaf and removes them from the stack while going back up.
A very important thing to note about \RecursiveIteratorIterator is that it returns a flattened array when used with the iterator_to_array function. Ex:
<?php
$arr = array('Zero', 'name'=>'Adil', 'address' => array( 'city'=>'Dubai', 'tel' => array('int' => 971, 'tel'=>12345487)), '' => 'nothing');
$iterator = new \RecursiveIteratorIterator(new \RecursiveArrayIterator($arr));
var_dump(iterator_to_array($iterator,true));
?>
This code will return :
array(6) {
[0]=>
string(4) "Zero"
["name"]=>
string(4) "Adil"
["city"]=>
string(5) "Dubai"
["int"]=>
int(91)
["tel"]=>
int(12345487)
[""]=>
string(7) "nothing"
}
To get the non-flattened proper array use the getArrayCopy() method, like so :
$iterator->getArrayCopy()
This will return
array(4) {
[0]=>
string(4) "Zero"
["name"]=>
string(4) "Adil"
["address"]=>
array(2) {
["city"]=>
string(5) "Dubai"
["tel"]=>
array(2) {
["int"]=>
int(91)
["tel"]=>
int(12345487)
}
}
[""]=>
string(7) "nothing"
}
if you want traversal directory。<?php
foreach (new RecursiveIteratorIterator(new RecursiveDirectoryIterator("./")) as $key=>$val)
{
echo $key,"=>",$val,"\n";
}
?>
Carefull when using iterator_to_array(). Because it flattens down your subiterators, elements with the same keys will overwrite eachother.
For example:
<?php
$iterator = new RecursiveIteratorIterator(
new RecursiveArrayIterator([
['foo', 'bar'],
['baz', 'qux']
])
);
foreach ($iterator as $element) {
echo $element;
}
?>
This will output all 4 elements as expected:
string(3) "foo"
string(3) "bar"
string(3) "baz"
string(3) "qux"
While doing:
<?php
var_dump(iterator_to_array($iterator));
?>
will output an array with only the last 2 elements:
array(2) {
[0]=>
string(3) "baz"
[1]=>
string(3) "qux"
}
A very useful use case for RecusiveIteratorIterator in combination with RecursiveArrayIterator is to replace array values on a multidimensional array at any level deep.
Usually, array_walk_recursive would be used to replace values deep within arrays, but unfortunately this only works when there is a standard key value pair - in other words, array_walk_recursive ONLY VISITS LEAF NODES, NOT arrays.
So to get around this, the iterators can be used in this way:
<?php
$array = [
'test' => 'value',
'level_one' => [
'level_two' => [
'level_three' => [
'replace_this_array' => [
'special_key' => 'replacement_value',
'key_one' => 'testing',
'key_two' => 'value',
'four' => 'another value'
]
],
'ordinary_key' => 'value'
]
]
];
$arrayIterator = new \RecursiveArrayIterator($array);
$recursiveIterator = new \RecursiveIteratorIterator($arrayIterator, \RecursiveIteratorIterator::SELF_FIRST);
foreach ($recursiveIterator as $key => $value) {
if (is_array($value) && array_key_exists('special_key', $value)) {
// Here we replace ALL keys with the same value from 'special_key'
$replaced = array_fill(0, count($value), $value['special_key']);
$value = array_combine(array_keys($value), $replaced);
// set a new key
$value['new_key'] = 'new value';
// Get the current depth and traverse back up the tree, saving the modifications
$currentDepth = $recursiveIterator->getDepth();
for ($subDepth = $currentDepth; $subDepth >= 0; $subDepth--) {
// Get the current level iterator
$subIterator = $recursiveIterator->getSubIterator($subDepth);
// If we are on the level we want to change, use the replacements ($value) other wise set the key to the parent iterators value
$subIterator->offsetSet($subIterator->key(), ($subDepth === $currentDepth ? $value : $recursiveIterator->getSubIterator(($subDepth+1))->getArrayCopy()));
}
}
}
return $recursiveIterator->getArrayCopy();
// return:
$array = [
'test' => 'value',
'level_one' => [
'level_two' => [
'level_three' => [
'replace_this_array' => [
'special_key' => 'replacement_value',
'key_one' => 'replacement_value',
'key_two' => 'replacement_value',
'four' => 'replacement_value',
'new_key' => 'new value'
]
],
'ordinary_key' => 'value'
]
]
];
?>
The key is in traversing back up the tree to save the changes at that level - simply calling $recursiveIterator->offsetSet(); will only set a key on the root array.