3.5. LDAP Authentication

3.5.1. Introduction

Zend_Auth_Adapter_Ldap supports web application authentication with LDAP services. Its features include username and domain name canonicalization, multi-domain authentication, and failover capabilities. It has been tested to work with Microsoft Active Directory and OpenLDAP, but it should also work with other LDAP service providers.

This documentation includes a guide on using Zend_Auth_Adapter_Ldap, an exploration of its API, an outline of the various available options, diagnostic information for troubleshooting authentication problems, and example options for both Active Directory and OpenLDAP servers.

3.5.2. Usage

To incorporate Zend_Auth_Adapter_Ldap authentication into your application quickly, even if you're not using Zend_Controller, the meat of your code should look something like the following:

$username = $this->_request->getParam('username');
$password = $this->_request->getParam('password');

$auth = Zend_Auth::getInstance();

require_once 'Zend/Config/Ini.php';
$config = new Zend_Config_Ini('../application/config/config.ini', 'production');
$log_path = $config->ldap->log_path;
$options = $config->ldap->toArray();

require_once 'Zend/Auth/Adapter/Ldap.php';
$adapter = new Zend_Auth_Adapter_Ldap($options, $username, $password);

$result = $auth->authenticate($adapter);

if ($log_path) {
    $messages = $result->getMessages();

    require_once 'Zend/Log.php';
    require_once 'Zend/Log/Writer/Stream.php';
    require_once 'Zend/Log/Filter/Priority.php';
    $logger = new Zend_Log();
    $logger->addWriter(new Zend_Log_Writer_Stream($log_path));
    $filter = new Zend_Log_Filter_Priority(Zend_Log::DEBUG);

    foreach ($messages as $i => $message) {
        if ($i-- > 1) { // $messages[2] and up are log messages
            $message = str_replace("\n", "\n  ", $message);
            $logger->log("Ldap: $i: $message", Zend_Log::DEBUG);

Of course the logging code is optional, but it is highly recommended that you use a logger. Zend_Auth_Adapter_Ldap will record just about every bit of information anyone could want in $messages (more below), which is a nice feature in itself for something that has a history of being notoriously difficult to debug.

The Zend_Config_Ini code is used above to load the adapter options. It is also optional. A regular array would work equally well. The following is an example application/config/config.ini file that has options for two separate servers. With multiple sets of server options the adapter will try each in order until the credentials are successfully authenticated. The names of the servers (e.g., server1 and server2) are largely arbitrary. For details regarding the options array, see the Server Options section below. Note that Zend_Config_Ini requires that any values with equals characters (=) will need to be quoted (like the DNs shown below).


ldap.log_path = /tmp/ldap.log

; Typical options for OpenLDAP
ldap.server1.host = s0.foo.net
ldap.server1.accountDomainName = foo.net
ldap.server1.accountDomainNameShort = FOO
ldap.server1.accountCanonicalForm = 3
ldap.server1.username = "CN=user1,DC=foo,DC=net"
ldap.server1.password = pass1
ldap.server1.baseDn = "OU=Sales,DC=foo,DC=net"
ldap.server1.bindRequiresDn = true

; Typical options for Active Directory
ldap.server2.host = dc1.w.net
ldap.server2.useSsl = true
ldap.server2.accountDomainName = w.net
ldap.server2.accountDomainNameShort = W
ldap.server2.accountCanonicalForm = 3
ldap.server2.baseDn = "CN=Users,DC=w,DC=net"

The above configuration will instruct Zend_Auth_Adapter_Ldap to attempt to authenticate users with the OpenLDAP server s0.foo.net first. If the authentication fails for any reason, the AD server dc1.w.net will be tried.

With servers in different domains, this configuration illustrates multi-domain authentication. You can also have multiple servers in the same domain to provide redundancy.

Note that in this case, even though OpenLDAP has no need for the short NetBIOS style domain name used by Windows we provide it here for name canonicalization purposes (described in the Username Canonicalization section below).

3.5.3. The API

The Zend_Auth_Adapter_Ldap constructor accepts three parameters.

The $options parameter is required and must be an array containing one or more sets of options. Note that it is an array of arrays of Zend_Ldap options. Even if you will be using only one LDAP server, the options must still be within another array.

Below is print_r() output of an example options parameter containing two sets of server options for LDAP servers s0.foo.net and dc1.w.net (same options as the above INI representation):

    [server2] => Array
            [host] => dc1.w.net
            [useSsl] => 1
            [accountDomainName] => w.net
            [accountDomainNameShort] => W
            [accountCanonicalForm] => 3
            [baseDn] => CN=Users,DC=w,DC=net

    [server1] => Array
            [host] => s0.foo.net
            [accountDomainName] => foo.net
            [accountDomainNameShort] => FOO
            [accountCanonicalForm] => 3
            [username] => CN=user1,DC=foo,DC=net
            [password] => pass1
            [baseDn] => OU=Sales,DC=foo,DC=net
            [bindRequiresDn] => 1


The information provided in each set of options above is different mainly because AD does not require a username be in DN form when binding (see the bindRequiresDn option in the Server Options section below), which means we can omit the a number of options associated with retrieving the DN for a username being authenticated.

[Замечание] What is a DN?

A DN or "distinguished name" is a string that represents the path to an object within the LDAP directory. Each comma separated component is an attribute and value representing a node. The components are evaluated in reverse. For example, the user account CN=Bob Carter,CN=Users,DC=w,DC=net is located directly within the CN=Users,DC=w,DC=net container. This structure is best explored with an LDAP browser like the ADSI Edit MMC snap-in for Active Directory or phpLDAPadmin.

The names of servers (e.g. 'server1' and 'server2' shown above) are largely arbitrary, but for the sake of using Zend_Config, the identifiers should be present (as opposed to being numeric indexes) and should not contain any special characters used by the associated file formats (e.g. the '.' INI property separator, '&' for XML entity references, etc).

With multiple sets of server options, the adapter can authenticate users in multiple domains and provide failover so that if one server is not available, another will be queried.

[Замечание] The Gory Details - What exactly happens in the authenticate method?

When the authenticate() method is called, the adapter iterates over each set of server options, sets them on the internal Zend_Ldap instance and calls the Zend_Ldap::bind() method with the username and password being authenticated. The Zend_Ldap class checks to see if the username is qualified with a domain (e.g., has a domain component like alice@foo.net or FOO\alice). If a domain is present, but it does not match either of the server's domain names (foo.net or FOO), a special exception is thrown and caught by Zend_Auth_Adapter_Ldap that causes that server to be ignored and the next set of server options is selected. If a domain does match, or if the user did not supply a qualified username, Zend_Ldap proceeds to try to bind with the supplied credentials. If the bind is not successful, Zend_Ldap throws a Zend_Ldap_Exception which is caught by Zend_Auth_Adapter_Ldap and the next set of server options is tried. If the bind is successful, the iteration stops, and the adapter's authenticate() method returns a successful result. If all server options have been tried without success, the authentication fails, and authenticate() returns a failure result with error messages from the last iteration.

The username and password parameters of the Zend_Auth_Adapter_Ldap constructor represent the credentials being authenticated (i.e., the credentials supplied by the user through your HTML login form). Alternatively, they may also be set with the setUsername() and setPassword() methods.

3.5.4. Server Options

Each set of server options in the context of Zend_Auth_Adapter_Ldap consists of the following options, which are passed, largely unmodifed, to Zend_Ldap::setOptions():

Таблица 3.2. Server Options

Name Description
host The hostname of LDAP server that these options represent. This option is required.
port The port on which the LDAP server is listening. If useSsl is true, the default port value is 636. If useSsl is false, the default port value is 389.
useSsl If true, this value indicates that the LDAP client should use SSL / TLS encrypted transport. A value of true is strongly favored in production environments to prevent passwords from be transmitted in clear text. The default value is false, as servers frequently require that a certificate be installed separately after installation. This value also changes the default port value (see port description above).
username The DN of the account used to perform account DN lookups. LDAP servers that require the username to be in DN form when performing the "bind" require this option. Meaning, if bindRequiresDn is true, this option is required. This account does not need to be a privileged account - a account with read-only access to objects under the baseDn is all that is necessary (and preferred based on the Principle of Least Privilege).
password The password of the account used to perform account DN lookups. If this option is not supplied, the LDAP client will attempt an "anonymous bind" when performing account DN lookups.
bindRequiresDn Some LDAP servers require that the username used to bind be in DN form like CN=Alice Baker,OU=Sales,DC=foo,DC=net (basically all servers except AD). If this option is true, this instructs Zend_Ldap to automatically retrieve the DN corresponding to the username being authenticated, if it is not already in DN form, and then re-bind with the proper DN. The default value is false. Currently only Microsoft Active Directory Server (ADS) is known not to require usernames to be in DN form when binding, and therefore this option may be false with AD (and it should be, as retrieving the DN requires an extra round trip to the server). Otherwise, this option must be set to true (e.g. for OpenLDAP). This option also controls the default acountFilterFormat used when searching for accounts. See the accountFilterFormat option.
baseDn The DN under which all accounts being authenticated are located. This option is required. If you are uncertain about the correct baseDn value, it should be sufficient to derive it from the user's DNS domain using DC= components. For example, if the user's principal name is alice@foo.net, a baseDn of DC=foo,DC=net should work. A more precise location (e.g., OU=Sales,DC=foo,DC=net) will be more efficient, however.
accountCanonicalForm A value of 2, 3 or 4 indicating the form to which account names should be canonicalized after successful authentication. Values are as follows: 2 for traditional username style names (e.g., alice), 3 for backslash-style names (e.g., FOO\alice) or 4 for principal style usernames (e.g., alice@foo.net). The default value is 4 (e.g., alice@foo.net). For example, with a value of 3, the identity returned by Zend_Auth_Result::getIdentity() (and Zend_Auth::getIdentity(), if Zend_Auth was used) will always be FOO\alice, regardless of what form Alice supplied, whether it be alice, alice@foo.net, FOO\alice, FoO\aLicE, foo.net\alice, etc. See the Account Name Canonicalization section in the Zend_Ldap documentation for details. Note that when using multiple sets of server options it is recommended, but not required, that the same accountCanonicalForm be used with all server options so that the resulting usernames are always canonicalized to the same form (e.g., if you canonicalize to EXAMPLE\username with an AD server but to username@example.com with an OpenLDAP server, that may be awkward for the application's high-level logic).
accountDomainName The FQDN domain name for which the target LDAP server is an authority (e.g., example.com). This option is used to canonicalize names so that the username supplied by the user can be converted as necessary for binding. It is also used to determine if the server is an authority for the supplied username (e.g., if accountDomainName is foo.net and the user supplies bob@bar.net, the server will not be queried, and a failure will result). This option is not required, but if it is not supplied, usernames in principal name form (e.g., alice@foo.net) are not supported. It is strongly recommended that you supply this option, as there are many use-cases that require generating the principal name form.
accountDomainNameShort The 'short' domain for which the target LDAP server is an authority (e.g., FOO). Note that there is a 1:1 mapping between the accountDomainName and accountDomainNameShort. This option should be used to specify the NetBIOS domain name for Windows networks but may also be used by non-AD servers (e.g., for consistency when multiple sets of server options with the backslash style accountCanonicalForm). This option is not required but if it is not supplied, usernames in backslash form (e.g., FOO\alice) are not supported.
accountFilterFormat The LDAP search filter used to search for accounts. This string is a printf()-style expression that must contain one '%s' to accomodate the username. The default value is '(&(objectClass=user)(sAMAccountName=%s))', unless bindRequiresDn is set to true, in which case the default is '(&(objectClass=posixAccount)(uid=%s))'. For example, if for some reason you wanted to use bindRequiresDn = true with AD you would need to set accountFilterFormat = '(&(objectClass=user)(sAMAccountName=%s))'.

[Замечание] Замечание

If you enable useSsl = true you may find that the LDAP client generates an error claiming that it cannot validate the server's certificate. Assuming the PHP LDAP extension is ultimately linked to the OpenLDAP client libraries, to resolve this issue you can set "TLS_REQCERT never" in the OpenLDAP client ldap.conf (and restart the web server) to indicate to the OpenLDAP client library that you trust the server. Alternatively if you are concerned that the server could be spoofed, you can export the LDAP server's root certificate and put it on the web server so that the OpenLDAP client can validate the server's identity.

3.5.5. Collecting Debugging Messages

Zend_Auth_Adapter_Ldap collects debugging information within its authenticate() method. This information is stored in the Zend_Auth_Result object as messages. The array returned by Zend_Auth_Result::getMessages() is described as follows:

Таблица 3.3. Debugging Messages

Messages Array Index Description
Index 0 A generic, user-friendly message that is suitable for displaying to users (e.g., "Invalid credentials"). If the authentication is successful, this string is empty.
Index 1 A more detailed error message that is not suitable to be displayed to users but should be logged for the benefit of server operators. If the authentication is successful, this string is empty.
Indexes 2 and higher All log messages in order starting at index 2.

In practice index 0 should be displayed to the user (e.g., using the FlashMessenger helper), index 1 should be logged and, if debugging information is being collected, indexes 2 and higher could be logged as well (although the final message always includes the string from index 1).

3.5.6. Common Options for Specific Servers Options for Active Directory

For ADS, the following options are noteworthy:

Таблица 3.4. Options for Active Directory

Name Additional Notes
host As with all servers, this option is required.
useSsl For the sake of security, this should be true if the server has the necessary certificate installed.
baseDn As with all servers, this option is required. By default AD places all user accounts under the Users container (e.g., CN=Users,DC=foo,DC=net), but the default is not common in larger organizations. Ask your AD administrator what the best DN for accounts for your application would be.
accountCanonicalForm You almost certainly want this to be 3 for backslash style names (e.g., FOO\alice), which are most familar to Windows users. You should not use the unqualified form 2 (e.g., alice), as this may grant access to your application to users with the same username in other trusted domains (e.g., BAR\alice and FOO\alice will be treated as the same user). (See also note below.)
accountDomainName This is required with AD unless accountCanonicalForm 2 is used, which, again, is discouraged.
accountDomainNameShort The NetBIOS name of the domain users are in and for which the AD server is an authority. This is required if the backslash style accountCanonicalForm is used.

[Замечание] Замечание

Technically there should be no danger of accidental cross-domain authentication with the current Zend_Auth_Adapter_Ldap implementation, since server domains are explicitly checked, but this may not be true of a future implementation that discovers the domain at runtime or if an alternative adapter is used (e.g., Kerberos). In general, account name ambiguity is known to be the source of security issues so always try to use qualified account names. Options for OpenLDAP

For OpenLDAP or a generic LDAP server using a typical posixAccount style schema, the following options are noteworthy:

Таблица 3.5. Options for OpenLDAP

Name Additional Notes
host As with all servers, this option is required.
useSsl For the sake of security, this should be true if the server has the necessary certificate installed.
username Required and must be a DN, as OpenLDAP requires that usernames be in DN form when performing a bind. Try to use an unprivileged account.
password The password corresponding to the username above, but this may be omitted if the LDAP server permits an anonymous binding to query user accounts.
bindRequiresDn Required and must be true, as OpenLDAP requires that usernames be in DN form when performing a bind.
baseDn As with all servers, this option is required and indicates the DN under which all accounts being authenticated are located.
accountCanonicalForm Optional but the default value is 4 (principal style names like alice@foo.net), which may not be ideal if your users are used to backslash style names (e.g., FOO\alice). For backslash style names use value 3.
accountDomainName Required unless you're using accountCanonicalForm 2, which is not recommended.
accountDomainNameShort If AD is not also being used, this value is not required. Otherwise, if accountCanonicalForm 3 is used, this option is required and should be a short name that corresponds adequately to the accountDomainName (e.g., if your accountDomainName is foo.net, a good accountDomainNameShort value might be FOO).

    Поддержать сайт на родительском проекте КГБ