Zend API: Взламываем ядро PHP

Introduction

Those who know don't talk.

Those who talk don't know.

Sometimes, PHP "as is" simply isn't enough. Although these cases are rare for the average user, professional applications will soon lead PHP to the edge of its capabilities, in terms of either speed or functionality. New functionality cannot always be implemented natively due to language restrictions and inconveniences that arise when having to carry around a huge library of default code appended to every single script, so another method needs to be found for overcoming these eventual lacks in PHP.

As soon as this point is reached, it's time to touch the heart of PHP and take a look at its core, the C code that makes PHP go.

Внимание

This information is currently rather outdated, parts of it only cover early stages of the ZendEngine 1.0 API as it was used in early versions of PHP 4.

More recent information may be found in the various README files that come with the PHP source and the » Internals section on the Zend website.

Overview

"Extending PHP" is easier said than done. PHP has evolved to a full-fledged tool consisting of a few megabytes of source code, and to hack a system like this quite a few things have to be learned and considered. When structuring this chapter, we finally decided on the "learn by doing" approach. This is not the most scientific and professional approach, but the method that's the most fun and gives the best end results. In the following sections, you'll learn quickly how to get the most basic extensions to work almost instantly. After that, you'll learn about Zend's advanced API functionality. The alternative would have been to try to impart the functionality, design, tips, tricks, etc. as a whole, all at once, thus giving a complete look at the big picture before doing anything practical. Although this is the "better" method, as no dirty hacks have to be made, it can be very frustrating as well as energy- and time-consuming, which is why we've decided on the direct approach.

Note that even though this chapter tries to impart as much knowledge as possible about the inner workings of PHP, it's impossible to really give a complete guide to extending PHP that works 100% of the time in all cases. PHP is such a huge and complex package that its inner workings can only be understood if you make yourself familiar with it by practicing, so we encourage you to work with the source.

What Is Zend? and What Is PHP?

The name Zend refers to the language engine, PHP's core. The term PHP refers to the complete system as it appears from the outside. This might sound a bit confusing at first, but it's not that complicated ( see below). To implement a Web script interpreter, you need three parts:

  1. The interpreter part analyzes the input code, translates it, and executes it.

  2. The functionality part implements the functionality of the language (its functions, etc.).

  3. The interface part talks to the Web server, etc.

Zend takes part 1 completely and a bit of part 2; PHP takes parts 2 and 3. Together they form the complete PHP package. Zend itself really forms only the language core, implementing PHP at its very basics with some predefined functions. PHP contains all the modules that actually create the language's outstanding capabilities.
The internal structure of PHP.

The following sections discuss where PHP can be extended and how it's done.

Extension Possibilities

As shown above, PHP can be extended primarily at three points: external modules, built-in modules, and the Zend engine. The following sections discuss these options.

External Modules

External modules can be loaded at script runtime using the function dl(). This function loads a shared object from disk and makes its functionality available to the script to which it's being bound. After the script is terminated, the external module is discarded from memory. This method has both advantages and disadvantages, as described in the following table:

Advantages Disadvantages
External modules don't require recompiling of PHP. The shared objects need to be loaded every time a script is being executed (every hit), which is very slow.
The size of PHP remains small by "outsourcing" certain functionality. External additional files clutter up the disk.
    Every script that wants to use an external module's functionality has to specifically include a call to dl(), or the extension tag in php.ini needs to be modified (which is not always a suitable solution).
To sum up, external modules are great for third-party products, small additions to PHP that are rarely used, or just for testing purposes. To develop additional functionality quickly, external modules provide the best results. For frequent usage, larger implementations, and complex code, the disadvantages outweigh the advantages.

Third parties might consider using the extension tag in php.ini to create additional external modules to PHP. These external modules are completely detached from the main package, which is a very handy feature in commercial environments. Commercial distributors can simply ship disks or archives containing only their additional modules, without the need to create fixed and solid PHP binaries that don't allow other modules to be bound to them.

Built-in Modules

Built-in modules are compiled directly into PHP and carried around with every PHP process; their functionality is instantly available to every script that's being run. Like external modules, built-in modules have advantages and disadvantages, as described in the following table:

Advantages Disadvantages
No need to load the module specifically; the functionality is instantly available. Changes to built-in modules require recompiling of PHP.
No external files clutter up the disk; everything resides in the PHP binary. The PHP binary grows and consumes more memory.
Built-in modules are best when you have a solid library of functions that remains relatively unchanged, requires better than poor-to-average performance, or is used frequently by many scripts on your site. The need to recompile PHP is quickly compensated by the benefit in speed and ease of use. However, built-in modules are not ideal when rapid development of small additions is required.

The Zend Engine

Of course, extensions can also be implemented directly in the Zend engine. This strategy is good if you need a change in the language behavior or require special functions to be built directly into the language core. In general, however, modifications to the Zend engine should be avoided. Changes here result in incompatibilities with the rest of the world, and hardly anyone will ever adapt to specially patched Zend engines. Modifications can't be detached from the main PHP sources and are overridden with the next update using the "official" source repositories. Therefore, this method is generally considered bad practice and, due to its rarity, is not covered in this book.

Source Layout

Замечание:

Prior to working through the rest of this chapter, you should retrieve clean, unmodified source trees of your favorite Web server. We're working with Apache (available at » http://httpd.apache.org/) and, of course, with PHP (available at » http://www.php.net/ - does it need to be said?).

Make sure that you can compile a working PHP environment by yourself! We won't go into this issue here, however, as you should already have this most basic ability when studying this chapter.

Before we start discussing code issues, you should familiarize yourself with the source tree to be able to quickly navigate through PHP's files. This is a must-have ability to implement and debug extensions.

The following table describes the contents of the major directories.

Directory Contents
php-src Main PHP source files and main header files; here you'll find all of PHP's API definitions, macros, etc. (important). Everything else is below this directory.
php-src/ext Repository for dynamic and built-in modules; by default, these are the "official" PHP modules that have been integrated into the main source tree. From PHP 4.0, it's possible to compile these standard extensions as dynamic loadable modules (at least, those that support it).
php-src/main This directory contains the main php macros and definitions. (important)
php-src/pear Directory for the PHP Extension and Application Repository. This directory contains core PEAR files.
php-src/sapi Contains the code for the different server abstraction layers.
TSRM Location of the "Thread Safe Resource Manager" (TSRM) for Zend and PHP.
ZendEngine2 Location of the Zend Engine files; here you'll find all of Zend's API definitions, macros, etc. (important).

Discussing all the files included in the PHP package is beyond the scope of this chapter. However, you should take a close look at the following files:

  • php-src/main/php.h, located in the main PHP directory. This file contains most of PHP's macro and API definitions.

  • php-src/Zend/zend.h, located in the main Zend directory. This file contains most of Zend's macros and definitions.

  • php-src/Zend/zend_API.h, also located in the Zend directory, which defines Zend's API.

You should also follow some sub-inclusions from these files; for example, the ones relating to the Zend executor, the PHP initialization file support, and such. After reading these files, take the time to navigate around the package a little to see the interdependencies of all files and modules - how they relate to each other and especially how they make use of each other. This also helps you to adapt to the coding style in which PHP is authored. To extend PHP, you should quickly adapt to this style.

Extension Conventions

Zend is built using certain conventions; to avoid breaking its standards, you should follow the rules described in the following sections.

Macros

For almost every important task, Zend ships predefined macros that are extremely handy. The tables and figures in the following sections describe most of the basic functions, structures, and macros. The macro definitions can be found mainly in zend.h and zend_API.h. We suggest that you take a close look at these files after having studied this chapter. (Although you can go ahead and read them now, not everything will make sense to you yet.)

Memory Management

Resource management is a crucial issue, especially in server software. One of the most valuable resources is memory, and memory management should be handled with extreme care. Memory management has been partially abstracted in Zend, and you should stick to this abstraction for obvious reasons: Due to the abstraction, Zend gets full control over all memory allocations. Zend is able to determine whether a block is in use, automatically freeing unused blocks and blocks with lost references, and thus prevent memory leaks. The functions to be used are described in the following table:

Function Description
emalloc() Serves as replacement for malloc().
efree() Serves as replacement for free().
estrdup() Serves as replacement for strdup().
estrndup() Serves as replacement for strndup(). Faster than estrdup() and binary-safe. This is the recommended function to use if you know the string length prior to duplicating it.
ecalloc() Serves as replacement for calloc().
erealloc() Serves as replacement for realloc().
emalloc(), estrdup(), estrndup(), ecalloc(), and erealloc() allocate internal memory; efree() frees these previously allocated blocks. Memory handled by the e*() functions is considered local to the current process and is discarded as soon as the script executed by this process is terminated.
Внимание

To allocate resident memory that survives termination of the current script, you can use malloc() and free(). This should only be done with extreme care, however, and only in conjunction with demands of the Zend API; otherwise, you risk memory leaks.

Zend also features a thread-safe resource manager to provide better native support for multithreaded Web servers. This requires you to allocate local structures for all of your global variables to allow concurrent threads to be run. Because the thread-safe mode of Zend was not finished back when this was written, it is not yet extensively covered here.

Directory and File Functions

The following directory and file functions should be used in Zend modules. They behave exactly like their C counterparts, but provide virtual working directory support on the thread level.

Zend Function Regular C Function
V_GETCWD() getcwd()
V_FOPEN() fopen()
V_OPEN() open()
V_CHDIR() chdir()
V_GETWD() getwd()
V_CHDIR_FILE() Takes a file path as an argument and changes the current working directory to that file's directory.
V_STAT() stat()
V_LSTAT() lstat()

String Handling

Strings are handled a bit differently by the Zend engine than other values such as integers, Booleans, etc., which don't require additional memory allocation for storing their values. If you want to return a string from a function, introduce a new string variable to the symbol table, or do something similar, you have to make sure that the memory the string will be occupying has previously been allocated, using the aforementioned e*() functions for allocation. (This might not make much sense to you yet; just keep it somewhere in your head for now - we'll get back to it shortly.)

Complex Types

Complex types such as arrays and objects require different treatment. Zend features a single API for these types - they're stored using hash tables.

Замечание:

To reduce complexity in the following source examples, we're only working with simple types such as integers at first. A discussion about creating more advanced types follows later in this chapter.

PHP's Automatic Build System

PHP 4 features an automatic build system that's very flexible. All modules reside in a subdirectory of the ext directory. In addition to its own sources, each module consists of a config.m4 file, for extension configuration. (for example, see » http://www.gnu.org/software/m4/)

All these stub files are generated automatically, along with .cvsignore, by a little shell script named ext_skel that resides in the ext directory. As argument it takes the name of the module that you want to create. The shell script then creates a directory of the same name, along with the appropriate stub files.

Step by step, the process looks like this:

:~/cvs/php4/ext:> ./ext_skel --extname=my_module
Creating directory my_module
Creating basic files: config.m4 .cvsignore my_module.c php_my_module.h CREDITS EXPERIMENTAL tests/001.phpt my_module.php [done].

To use your new extension, you will have to execute the following steps:

1.  $ cd ..
2.  $ vi ext/my_module/config.m4
3.  $ ./buildconf
4.  $ ./configure --[with|enable]-my_module
5.  $ make
6.  $ ./php -f ext/my_module/my_module.php
7.  $ vi ext/my_module/my_module.c
8.  $ make

Repeat steps 3-6 until you are satisfied with ext/my_module/config.m4 and
step 6 confirms that your module is compiled into PHP. Then, start writing
code and repeat the last two steps as often as necessary.
This instruction creates the aforementioned files. To include the new module in the automatic configuration and build process, you have to run buildconf, which regenerates the configure script by searching through the ext directory and including all found config.m4 files.

The default config.m4 shown in The default config.m4. is a bit more complex:

Пример #1 The default config.m4.

dnl $Id: build.xml 297078 2010-03-29 16:25:51Z degeberg $
dnl config.m4 for extension my_module

dnl Comments in this file start with the string 'dnl'.
dnl Remove where necessary. This file will not work
dnl without editing.

dnl If your extension references something external, use with:

dnl PHP_ARG_WITH(my_module, for my_module support,
dnl Make sure that the comment is aligned:
dnl [  --with-my_module             Include my_module support])

dnl Otherwise use enable:

dnl PHP_ARG_ENABLE(my_module, whether to enable my_module support,
dnl Make sure that the comment is aligned:
dnl [  --enable-my_module           Enable my_module support])

if test "$PHP_MY_MODULE" != "no"; then
  dnl Write more examples of tests here...

  dnl # --with-my_module -> check with-path
  dnl SEARCH_PATH="/usr/local /usr"     # you might want to change this
  dnl SEARCH_FOR="/include/my_module.h"  # you most likely want to change this
  dnl if test -r $PHP_MY_MODULE/; then # path given as parameter
  dnl   MY_MODULE_DIR=$PHP_MY_MODULE
  dnl else # search default path list
  dnl   AC_MSG_CHECKING([for my_module files in default path])
  dnl   for i in $SEARCH_PATH ; do
  dnl     if test -r $i/$SEARCH_FOR; then
  dnl       MY_MODULE_DIR=$i
  dnl       AC_MSG_RESULT(found in $i)
  dnl     fi
  dnl   done
  dnl fi
  dnl
  dnl if test -z "$MY_MODULE_DIR"; then
  dnl   AC_MSG_RESULT([not found])
  dnl   AC_MSG_ERROR([Please reinstall the my_module distribution])
  dnl fi

  dnl # --with-my_module -> add include path
  dnl PHP_ADD_INCLUDE($MY_MODULE_DIR/include)

  dnl # --with-my_module -> chech for lib and symbol presence
  dnl LIBNAME=my_module # you may want to change this
  dnl LIBSYMBOL=my_module # you most likely want to change this 

  dnl PHP_CHECK_LIBRARY($LIBNAME,$LIBSYMBOL,
  dnl [
  dnl   PHP_ADD_LIBRARY_WITH_PATH($LIBNAME, $MY_MODULE_DIR/lib, MY_MODULE_SHARED_LIBADD)
  dnl   AC_DEFINE(HAVE_MY_MODULELIB,1,[ ])
  dnl ],[
  dnl   AC_MSG_ERROR([wrong my_module lib version or lib not found])
  dnl ],[
  dnl   -L$MY_MODULE_DIR/lib -lm -ldl
  dnl ])
  dnl
  dnl PHP_SUBST(MY_MODULE_SHARED_LIBADD)

  PHP_NEW_EXTENSION(my_module, my_module.c, $ext_shared)
fi

If you're unfamiliar with M4 files (now is certainly a good time to get familiar), this might be a bit confusing at first; but it's actually quite easy.

Note: Everything prefixed with dnl is treated as a comment and is not parsed.

The config.m4 file is responsible for parsing the command-line options passed to configure at configuration time. This means that it has to check for required external files and do similar configuration and setup tasks.

The default file creates two configuration directives in the configure script: --with-my_module and --enable-my_module. Use the first option when referring external files (such as the --with-apache directive that refers to the Apache directory). Use the second option when the user simply has to decide whether to enable your extension. Regardless of which option you use, you should uncomment the other, unnecessary one; that is, if you're using --enable-my_module, you should remove support for --with-my_module, and vice versa.

By default, the config.m4 file created by ext_skel accepts both directives and automatically enables your extension. Enabling the extension is done by using the PHP_EXTENSION macro. To change the default behavior to include your module into the PHP binary when desired by the user (by explicitly specifying --enable-my_module or --with-my_module), change the test for $PHP_MY_MODULE to == "yes":

if test "$PHP_MY_MODULE" == "yes"; then dnl
    Action.. PHP_EXTENSION(my_module, $ext_shared)
    fi
This would require you to use --enable-my_module each time when reconfiguring and recompiling PHP.

Note: Be sure to run buildconf every time you change config.m4!

We'll go into more details on the M4 macros available to your configuration scripts later in this chapter. For now, we'll simply use the default files.

Creating Extensions

We'll start with the creation of a very simple extension at first, which basically does nothing more than implement a function that returns the integer it receives as parameter. A simple extension. shows the source.

Пример #2 A simple extension.

/* include standard header */
#include "php.h"

/* declaration of functions to be exported */
ZEND_FUNCTION(first_module);

/* compiled function list so Zend knows what's in this module */
zend_function_entry firstmod_functions[] =
{
    ZEND_FE(first_module, NULL)
    ZEND_FE_END
};

/* compiled module information */
zend_module_entry firstmod_module_entry =
{
    STANDARD_MODULE_HEADER,
    "First Module",
    firstmod_functions,
    NULL, 
    NULL, 
    NULL, 
    NULL, 
    NULL,
    NO_VERSION_YET,
    STANDARD_MODULE_PROPERTIES
};

/* implement standard "stub" routine to introduce ourselves to Zend */
#if COMPILE_DL_FIRST_MODULE
ZEND_GET_MODULE(firstmod)
#endif

/* implement function that is meant to be made available to PHP */
ZEND_FUNCTION(first_module)
{
    long parameter;

    if (zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "l", &parameter) == FAILURE) {
        return;
    }

    RETURN_LONG(parameter);
}

This code contains a complete PHP module. We'll explain the source code in detail shortly, but first we'd like to discuss the build process. (This will allow the impatient to experiment before we dive into API discussions.)

Замечание:

The example source makes use of some features introduced with the Zend version used in PHP 4.1.0 and above, it won't compile with older PHP 4.0.x versions.

Compiling Modules

There are basically two ways to compile modules:

  • Use the provided "make" mechanism in the ext directory, which also allows building of dynamic loadable modules.

  • Compile the sources manually.

The first method should definitely be favored, since, as of PHP 4.0, this has been standardized into a sophisticated build process. The fact that it is so sophisticated is also its drawback, unfortunately - it's hard to understand at first. We'll provide a more detailed introduction to this later in the chapter, but first let's work with the default files.

The second method is good for those who (for some reason) don't have the full PHP source tree available, don't have access to all files, or just like to juggle with their keyboard. These cases should be extremely rare, but for the sake of completeness we'll also describe this method.

Compiling Using Make

To compile the sample sources using the standard mechanism, copy all their subdirectories to the ext directory of your PHP source tree. Then run buildconf, which will create an updated configure script containing appropriate options for the new extension. By default, all the sample sources are disabled, so you don't have to fear breaking your build process.

After you run buildconf, configure --help shows the following additional modules:

  --enable-array_experiments   BOOK: Enables array experiments
  --enable-call_userland       BOOK: Enables userland module
  --enable-cross_conversion    BOOK: Enables cross-conversion module
  --enable-first_module        BOOK: Enables first module
  --enable-infoprint           BOOK: Enables infoprint module
  --enable-reference_test      BOOK: Enables reference test module
  --enable-resource_test       BOOK: Enables resource test module
  --enable-variable_creation   BOOK: Enables variable-creation module

The module shown earlier in A simple extension. can be enabled with --enable-first_module or --enable-first_module=yes.

Compiling Manually

To compile your modules manually, you need the following commands:

Action Command
Compiling cc -fpic -DCOMPILE_DL_FIRST_MODULE=1 -I/usr/local/include -I. -I.. -I../Zend -c -o <your_object_file> <your_c_file>
Linking cc -shared -L/usr/local/lib -rdynamic -o <your_module_file> <your_object_file(s)>
The command to compile the module simply instructs the compiler to generate position-independent code (-fpic shouldn't be omitted) and additionally defines the constant COMPILE_DL_FIRST_MODULE to tell the module code that it's compiled as a dynamically loadable module (the test module above checks for this; we'll discuss it shortly). After these options, it specifies a number of standard include paths that should be used as the minimal set to compile the source files.

Note: All include paths in the example are relative to the directory ext. If you're compiling from another directory, change the pathnames accordingly. Required items are the PHP directory, the Zend directory, and (if necessary), the directory in which your module resides.

The link command is also a plain vanilla command instructing linkage as a dynamic module.

You can include optimization options in the compilation command, although these have been omitted in this example (but some are included in the makefile template described in an earlier section).

Note: Compiling and linking manually as a static module into the PHP binary involves very long instructions and thus is not discussed here. (It's not very efficient to type all those commands.)

Using Extensions

Depending on the build process you selected, you should either end up with a new PHP binary to be linked into your Web server (or run as CGI), or with an .so (shared object) file. If you compiled the example file first_module.c as a shared object, your result file should be first_module.so. To use it, you first have to copy it to a place from which it's accessible to PHP. For a simple test procedure, you can copy it to your htdocs directory and try it with the source in A test file for first_module.so.. If you compiled it into the PHP binary, omit the call to dl(), as the module's functionality is instantly available to your scripts.

Внимание

For security reasons, you should not put your dynamic modules into publicly accessible directories. Even though it can be done and it simplifies testing, you should put them into a separate directory in production environments.

Пример #3 A test file for first_module.so.

<?php
    
// remove next comment if necessary
// dl("first_module.so"); 

$param 2;
$return first_module($param);

print(
"We sent '$param' and got '$return'");

?>

Calling this PHP file should output the following:

We sent '2' and got '2'

If required, the dynamic loadable module is loaded by calling the dl() function. This function looks for the specified shared object, loads it, and makes its functions available to PHP. The module exports the function first_module(), which accepts a single parameter, converts it to an integer, and returns the result of the conversion.

If you've gotten this far, congratulations! You just built your first extension to PHP.

Troubleshooting

Actually, not much troubleshooting can be done when compiling static or dynamic modules. The only problem that could arise is that the compiler will complain about missing definitions or something similar. In this case, make sure that all header files are available and that you specified their path correctly in the compilation command. To be sure that everything is located correctly, extract a clean PHP source tree and use the automatic build in the ext directory with the fresh files; this will guarantee a safe compilation environment. If this fails, try manual compilation.

PHP might also complain about missing functions in your module. (This shouldn't happen with the sample sources if you didn't modify them.) If the names of external functions you're trying to access from your module are misspelled, they'll remain as "unlinked symbols" in the symbol table. During dynamic loading and linkage by PHP, they won't resolve because of the typing errors - there are no corresponding symbols in the main binary. Look for incorrect declarations in your module file or incorrectly written external references. Note that this problem is specific to dynamic loadable modules; it doesn't occur with static modules. Errors in static modules show up at compile time.

Source Discussion

Now that you've got a safe build environment and you're able to include the modules into PHP files, it's time to discuss how everything works.

Module Structure

All PHP modules follow a common structure:

  • Header file inclusions (to include all required macros, API definitions, etc.)

  • C declaration of exported functions (required to declare the Zend function block)

  • Declaration of the Zend function block

  • Declaration of the Zend module block

  • Implementation of get_module()

  • Implementation of all exported functions

Header File Inclusions

The only header file you really have to include for your modules is php.h, located in the PHP directory. This file makes all macros and API definitions required to build new modules available to your code.

Tip: It's good practice to create a separate header file for your module that contains module-specific definitions. This header file should contain all the forward definitions for exported functions and include php.h. If you created your module using ext_skel you already have such a header file prepared.

Declaring Exported Functions

To declare functions that are to be exported (i.e., made available to PHP as new native functions), Zend provides a set of macros. A sample declaration looks like this:

ZEND_FUNCTION ( my_function );

ZEND_FUNCTION declares a new C function that complies with Zend's internal API. This means that the function is of type void and accepts INTERNAL_FUNCTION_PARAMETERS (another macro) as parameters. Additionally, it prefixes the function name with zif. The immediately expanded version of the above definitions would look like this:

void zif_my_function ( INTERNAL_FUNCTION_PARAMETERS );
Expanding INTERNAL_FUNCTION_PARAMETERS results in the following:
void zif_my_function( int ht
                    , zval * return_value
                    , zval * this_ptr
                    , int return_value_used
                    , zend_executor_globals * executor_globals
                    );

Since the interpreter and executor core have been separated from the main PHP package, a second API defining macros and function sets has evolved: the Zend API. As the Zend API now handles quite a few of the responsibilities that previously belonged to PHP, a lot of PHP functions have been reduced to macros aliasing to calls into the Zend API. The recommended practice is to use the Zend API wherever possible, as the old API is only preserved for compatibility reasons. For example, the types zval and pval are identical. zval is Zend's definition; pval is PHP's definition (actually, pval is an alias for zval now). As the macro INTERNAL_FUNCTION_PARAMETERS is a Zend macro, the above declaration contains zval. When writing code, you should always use zval to conform to the new Zend API.

The parameter list of this declaration is very important; you should keep these parameters in mind (see Zend's Parameters to Functions Called from PHP for descriptions).

Zend's Parameters to Functions Called from PHP
Parameter Description
ht The number of arguments passed to the Zend function. You should not touch this directly, but instead use ZEND_NUM_ARGS() to obtain the value.
return_value This variable is used to pass any return values of your function back to PHP. Access to this variable is best done using the predefined macros. For a description of these see below.
this_ptr Using this variable, you can gain access to the object in which your function is contained, if it's used within an object. Use the function getThis() to obtain this pointer.
return_value_used This flag indicates whether an eventual return value from this function will actually be used by the calling script. 0 indicates that the return value is not used; 1 indicates that the caller expects a return value. Evaluation of this flag can be done to verify correct usage of the function as well as speed optimizations in case returning a value requires expensive operations (for an example, see how array.c makes use of this).
executor_globals This variable points to global settings of the Zend engine. You'll find this useful when creating new variables, for example (more about this later). The executor globals can also be introduced to your function by using the macro TSRMLS_FETCH().

Declaration of the Zend Function Block

Now that you have declared the functions to be exported, you also have to introduce them to Zend. Introducing the list of functions is done by using an array of zend_function_entry. This array consecutively contains all functions that are to be made available externally, with the function's name as it should appear in PHP and its name as defined in the C source. Internally, zend_function_entry is defined as shown in Internal declaration of zend_function_entry..

Пример #4 Internal declaration of zend_function_entry.

typedef struct _zend_function_entry {
    char *fname;
    void (*handler)(INTERNAL_FUNCTION_PARAMETERS);
    unsigned char *func_arg_types;
} zend_function_entry;
Entry Description
fname Denotes the function name as seen in PHP (for example, fopen, mysql_connect, or, in our example, first_module).
handler Pointer to the C function responsible for handling calls to this function. For example, see the standard macro INTERNAL_FUNCTION_PARAMETERS discussed earlier.
func_arg_types Allows you to mark certain parameters so that they're forced to be passed by reference. You usually should set this to NULL.
In the example above, the declaration looks like this:
zend_function_entry firstmod_functions[] =
{
    ZEND_FE(first_module, NULL)
    ZEND_FE_END
};
You can see that the last entry in the list always has to be ZEND_FE_END. This marker has to be set for Zend to know when the end of the list of exported functions is reached.

The macro ZEND_FE (short for 'Zend Function Entry') simply expands to a structure entry in zend_function_entry. Note that these macros introduce a special naming scheme to your functions - your C functions will be prefixed with zif_, meaning that ZEND_FE(first_module) will refer to a C function zif_first_module(). If you want to mix macro usage with hand-coded entries (not a good practice), keep this in mind.

Tip: Compilation errors that refer to functions named zif_*() relate to functions defined with ZEND_FE.

Macros for Defining Functions shows a list of all the macros that you can use to define functions.

Macros for Defining Functions
Macro Name Description
ZEND_FE(name, arg_types) Defines a function entry of the name name in zend_function_entry. Requires a corresponding C function. arg_types needs to be set to NULL. This function uses automatic C function name generation by prefixing the PHP function name with zif_. For example, ZEND_FE("first_module", NULL) introduces a function first_module() to PHP and links it to the C function zif_first_module(). Use in conjunction with ZEND_FUNCTION.
ZEND_NAMED_FE(php_name, name, arg_types) Defines a function that will be available to PHP by the name php_name and links it to the corresponding C function name. arg_types needs to be set to NULL. Use this function if you don't want the automatic name prefixing introduced by ZEND_FE. Use in conjunction with ZEND_NAMED_FUNCTION.
ZEND_FALIAS(name, alias, arg_types) Defines an alias named alias for name. arg_types needs to be set to NULL. Doesn't require a corresponding C function; refers to the alias target instead.
PHP_FE(name, arg_types) Old PHP API equivalent of ZEND_FE.
PHP_NAMED_FE(runtime_name, name, arg_types) Old PHP API equivalent of ZEND_NAMED_FE.

Note: You can't use ZEND_FE in conjunction with PHP_FUNCTION, or PHP_FE in conjunction with ZEND_FUNCTION. However, it's perfectly legal to mix ZEND_FE and ZEND_FUNCTION with PHP_FE and PHP_FUNCTION when staying with the same macro set for each function to be declared. But mixing is not recommended; instead, you're advised to use the ZEND_* macros only.

Declaration of the Zend Module Block

This block is stored in the structure zend_module_entry and contains all necessary information to describe the contents of this module to Zend. You can see the internal definition of this module in Internal declaration of zend_module_entry..

Пример #5 Internal declaration of zend_module_entry.

typedef struct _zend_module_entry zend_module_entry;

    struct _zend_module_entry {
    unsigned short size;
    unsigned int zend_api;
    unsigned char zend_debug;
    unsigned char zts;
    char *name;
    zend_function_entry *functions;
    int (*module_startup_func)(INIT_FUNC_ARGS);
    int (*module_shutdown_func)(SHUTDOWN_FUNC_ARGS);
    int (*request_startup_func)(INIT_FUNC_ARGS);
    int (*request_shutdown_func)(SHUTDOWN_FUNC_ARGS);
    void (*info_func)(ZEND_MODULE_INFO_FUNC_ARGS);
    char *version;

[ Rest of the structure is not interesting here ]

};
Entry Description
size, zend_api, zend_debug and zts Usually filled with the "STANDARD_MODULE_HEADER", which fills these four members with the size of the whole zend_module_entry, the ZEND_MODULE_API_NO, whether it is a debug build or normal build (ZEND_DEBUG) and if ZTS is enabled (USING_ZTS).
name Contains the module name (for example, "File functions", "Socket functions", "Crypt", etc.). This name will show up in phpinfo(), in the section "Additional Modules."
functions Points to the Zend function block, discussed in the preceding section.
module_startup_func This function is called once upon module initialization and can be used to do one-time initialization steps (such as initial memory allocation, etc.). To indicate a failure during initialization, return FAILURE; otherwise, SUCCESS. To mark this field as unused, use NULL. To declare a function, use the macro ZEND_MINIT.
module_shutdown_func This function is called once upon module shutdown and can be used to do one-time deinitialization steps (such as memory deallocation). This is the counterpart to module_startup_func(). To indicate a failure during deinitialization, return FAILURE; otherwise, SUCCESS. To mark this field as unused, use NULL. To declare a function, use the macro ZEND_MSHUTDOWN.
request_startup_func This function is called once upon every page request and can be used to do one-time initialization steps that are required to process a request. To indicate a failure here, return FAILURE; otherwise, SUCCESS. Note: As dynamic loadable modules are loaded only on page requests, the request startup function is called right after the module startup function (both initialization events happen at the same time). To mark this field as unused, use NULL. To declare a function, use the macro ZEND_RINIT.
request_shutdown_func This function is called once after every page request and works as counterpart to request_startup_func(). To indicate a failure here, return FAILURE; otherwise, SUCCESS. Note: As dynamic loadable modules are loaded only on page requests, the request shutdown function is immediately followed by a call to the module shutdown handler (both deinitialization events happen at the same time). To mark this field as unused, use NULL. To declare a function, use the macro ZEND_RSHUTDOWN.
info_func When phpinfo() is called in a script, Zend cycles through all loaded modules and calls this function. Every module then has the chance to print its own "footprint" into the output page. Generally this is used to dump environmental or statistical information. To mark this field as unused, use NULL. To declare a function, use the macro ZEND_MINFO.
version The version of the module. You can use NO_VERSION_YET if you don't want to give the module a version number yet, but we really recommend that you add a version string here. Such a version string can look like this (in chronological order): "2.5-dev", "2.5RC1", "2.5" or "2.5pl3".
Remaining structure elements These are used internally and can be prefilled by using the macro STANDARD_MODULE_PROPERTIES_EX. You should not assign any values to them. Use STANDARD_MODULE_PROPERTIES_EX only if you use global startup and shutdown functions; otherwise, use STANDARD_MODULE_PROPERTIES directly.

In our example, this structure is implemented as follows:

zend_module_entry firstmod_module_entry =
{
    STANDARD_MODULE_HEADER,
    "First Module",
    firstmod_functions,
    NULL, NULL, NULL, NULL, NULL,
    NO_VERSION_YET,
    STANDARD_MODULE_PROPERTIES,
};
This is basically the easiest and most minimal set of values you could ever use. The module name is set to First Module, then the function list is referenced, after which all startup and shutdown functions are marked as being unused.

For reference purposes, you can find a list of the macros involved in declared startup and shutdown functions in Macros to Declare Startup and Shutdown Functions. These are not used in our basic example yet, but will be demonstrated later on. You should make use of these macros to declare your startup and shutdown functions, as these require special arguments to be passed (INIT_FUNC_ARGS and SHUTDOWN_FUNC_ARGS), which are automatically included into the function declaration when using the predefined macros. If you declare your functions manually and the PHP developers decide that a change in the argument list is necessary, you'll have to change your module sources to remain compatible.

Macros to Declare Startup and Shutdown Functions
Macro Description
ZEND_MINIT(module) Declares a function for module startup. The generated name will be zend_minit_<module> (for example, zend_minit_first_module). Use in conjunction with ZEND_MINIT_FUNCTION.
ZEND_MSHUTDOWN(module) Declares a function for module shutdown. The generated name will be zend_mshutdown_<module> (for example, zend_mshutdown_first_module). Use in conjunction with ZEND_MSHUTDOWN_FUNCTION.
ZEND_RINIT(module) Declares a function for request startup. The generated name will be zend_rinit_<module> (for example, zend_rinit_first_module). Use in conjunction with ZEND_RINIT_FUNCTION.
ZEND_RSHUTDOWN(module) Declares a function for request shutdown. The generated name will be zend_rshutdown_<module> (for example, zend_rshutdown_first_module). Use in conjunction with ZEND_RSHUTDOWN_FUNCTION.
ZEND_MINFO(module) Declares a function for printing module information, used when phpinfo() is called. The generated name will be zend_info_<module> (for example, zend_info_first_module). Use in conjunction with ZEND_MINFO_FUNCTION.

Creation of get_module()

This function is special to all dynamic loadable modules. Take a look at the creation via the ZEND_GET_MODULE macro first:

#if COMPILE_DL_FIRSTMOD
     ZEND_GET_MODULE(firstmod) 
#endif

The function implementation is surrounded by a conditional compilation statement. This is needed since the function get_module() is only required if your module is built as a dynamic extension. By specifying a definition of COMPILE_DL_FIRSTMOD in the compiler command (see above for a discussion of the compilation instructions required to build a dynamic extension), you can instruct your module whether you intend to build it as a dynamic extension or as a built-in module. If you want a built-in module, the implementation of get_module() is simply left out.

get_module() is called by Zend at load time of the module. You can think of it as being invoked by the dl() call in your script. Its purpose is to pass the module information block back to Zend in order to inform the engine about the module contents.

If you don't implement a get_module() function in your dynamic loadable module, Zend will compliment you with an error message when trying to access it.

Implementation of All Exported Functions

Implementing the exported functions is the final step. The example function in first_module looks like this:

ZEND_FUNCTION(first_module)
{
    long parameter;

    if (zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "l", &parameter) == FAILURE) {
        return;
    }

    RETURN_LONG(parameter);
}
The function declaration is done using ZEND_FUNCTION, which corresponds to ZEND_FE in the function entry table (discussed earlier).

After the declaration, code for checking and retrieving the function's arguments, argument conversion, and return value generation follows (more on this later).

Summary

That's it, basically - there's nothing more to implementing PHP modules. Built-in modules are structured similarly to dynamic modules, so, equipped with the information presented in the previous sections, you'll be able to fight the odds when encountering PHP module source files.

Now, in the following sections, read on about how to make use of PHP's internals to build powerful extensions.

Accepting Arguments

One of the most important issues for language extensions is accepting and dealing with data passed via arguments. Most extensions are built to deal with specific input data (or require parameters to perform their specific actions), and function arguments are the only real way to exchange data between the PHP level and the C level. Of course, there's also the possibility of exchanging data using predefined global values (which is also discussed later), but this should be avoided by all means, as it's extremely bad practice.

PHP doesn't make use of any formal function declarations; this is why call syntax is always completely dynamic and never checked for errors. Checking for correct call syntax is left to the user code. For example, it's possible to call a function using only one argument at one time and four arguments the next time - both invocations are syntactically absolutely correct.

Determining the Number of Arguments

Since PHP doesn't have formal function definitions with support for call syntax checking, and since PHP features variable arguments, sometimes you need to find out with how many arguments your function has been called. You can use the ZEND_NUM_ARGS macro in this case. In previous versions of PHP, this macro retrieved the number of arguments with which the function has been called based on the function's hash table entry, ht, which is passed in the INTERNAL_FUNCTION_PARAMETERS list. As ht itself now contains the number of arguments that have been passed to the function, ZEND_NUM_ARGS has been stripped down to a dummy macro (see its definition in zend_API.h). But it's still good practice to use it, to remain compatible with future changes in the call interface. Note: The old PHP equivalent of this macro is ARG_COUNT.

The following code checks for the correct number of arguments:

if(ZEND_NUM_ARGS() != 2) WRONG_PARAM_COUNT;
If the function is not called with two arguments, it exits with an error message. The code snippet above makes use of the tool macro WRONG_PARAM_COUNT, which can be used to generate a standard error message like:
"Warning: Wrong parameter count for firstmodule() in /home/www/htdocs/firstmod.php on line 5"

This macro prints a default error message and then returns to the caller. Its definition can also be found in zend_API.h and looks like this:

ZEND_API void wrong_param_count(void);

#define WRONG_PARAM_COUNT { wrong_param_count(); return; }
As you can see, it calls an internal function named wrong_param_count() that's responsible for printing the warning. For details on generating customized error messages, see the later section "Printing Information."

Retrieving Arguments

Замечание: New parameter parsing API

This chapter documents the new Zend parameter parsing API introduced by Andrei Zmievski. It was introduced in the development stage between PHP 4.0.6 and 4.1.0.

Parsing parameters is a very common operation and it may get a bit tedious. It would also be nice to have standardized error checking and error messages. Since PHP 4.1.0, there is a way to do just that by using the new parameter parsing API. It greatly simplifies the process of receiving parameters, but it has a drawback in that it can't be used for functions that expect variable number of parameters. But since the vast majority of functions do not fall into those categories, this parsing API is recommended as the new standard way.

The prototype for parameter parsing function looks like this:

int zend_parse_parameters(int num_args TSRMLS_DC, char *type_spec, ...);
The first argument to this function is supposed to be the number of actual parameters passed to your function, so ZEND_NUM_ARGS() can be used for that. The second parameter should always be TSRMLS_CC macro. The third argument is a string that specifies the number and types of arguments your function is expecting, similar to how printf format string specifies the number and format of the output values it should operate on. And finally the rest of the arguments are pointers to variables which should receive the values from the parameters.

zend_parse_parameters() also performs type conversions whenever possible, so that you always receive the data in the format you asked for. Any type of scalar can be converted to another one, but conversions between complex types (arrays, objects, and resources) and scalar types are not allowed.

If the parameters could be obtained successfully and there were no errors during type conversion, the function will return SUCCESS, otherwise it will return FAILURE. The function will output informative error messages, if the number of received parameters does not match the requested number, or if type conversion could not be performed.

Here are some sample error messages:


Warning - ini_get_all() requires at most 1 parameter, 2 given
Warning - wddx_deserialize() expects parameter 1 to be string, array given
Of course each error message is accompanied by the filename and line number on which it occurs.

Here is the full list of type specifiers:

  • l - long

  • d - double

  • s - string (with possible null bytes) and its length

  • b - boolean

  • r - resource, stored in zval*

  • a - array, stored in zval*

  • o - object (of any class), stored in zval*

  • O - object (of class specified by class entry), stored in zval*

  • z - the actual zval*

The following characters also have a meaning in the specifier string:
  • | - indicates that the remaining parameters are optional. The storage variables corresponding to these parameters should be initialized to default values by the extension, since they will not be touched by the parsing function if the parameters are not passed.

  • / - the parsing function will call SEPARATE_ZVAL_IF_NOT_REF() on the parameter it follows, to provide a copy of the parameter, unless it's a reference.

  • ! - the parameter it follows can be of specified type or NULL (only applies to a, o, O, r, and z). If NULL value is passed by the user, the storage pointer will be set to NULL.

The best way to illustrate the usage of this function is through examples:

/* Gets a long, a string and its length, and a zval. */
long l;
char *s;
int s_len;
zval *param;
if (zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC,
                          "lsz", &l, &s, &s_len, &param) == FAILURE) {
    return;
}

/* Gets an object of class specified by my_ce, and an optional double. */
zval *obj;
double d = 0.5;
if (zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC,
                          "O|d", &obj, my_ce, &d) == FAILURE) {
    return;
}

/* Gets an object or null, and an array.
   If null is passed for object, obj will be set to NULL. */
zval *obj;
zval *arr;
if (zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "O!a", &obj, &arr) == FAILURE) {
    return;
}

/* Gets a separated array. */
zval *arr;
if (zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "a/", &arr) == FAILURE) {
    return;
}

/* Get only the first three parameters (useful for varargs functions). */
zval *z;
zend_bool b;
zval *r;
if (zend_parse_parameters(3, "zbr!", &z, &b, &r) == FAILURE) {
    return;
}

Note that in the last example we pass 3 for the number of received parameters, instead of ZEND_NUM_ARGS(). What this lets us do is receive the least number of parameters if our function expects a variable number of them. Of course, if you want to operate on the rest of the parameters, you will have to use zend_get_parameters_array_ex() to obtain them.

The parsing function has an extended version that allows for an additional flags argument that controls its actions.

int zend_parse_parameters_ex(int flags, int num_args TSRMLS_DC, char *type_spec, ...);

The only flag you can pass currently is ZEND_PARSE_PARAMS_QUIET, which instructs the function to not output any error messages during its operation. This is useful for functions that expect several sets of completely different arguments, but you will have to output your own error messages.

For example, here is how you would get either a set of three longs or a string:

long l1, l2, l3;
char *s;
if (zend_parse_parameters_ex(ZEND_PARSE_PARAMS_QUIET,
                             ZEND_NUM_ARGS() TSRMLS_CC,
                             "lll", &l1, &l2, &l3) == SUCCESS) {
    /* manipulate longs */
} else if (zend_parse_parameters_ex(ZEND_PARSE_PARAMS_QUIET,
                                    ZEND_NUM_ARGS(), "s", &s, &s_len) == SUCCESS) {
    /* manipulate string */
} else {
    php_error(E_WARNING, "%s() takes either three long values or a string as argument",
              get_active_function_name(TSRMLS_C));
    return;
}

With all the abovementioned ways of receiving function parameters you should have a good handle on this process. For even more example, look through the source code for extensions that are shipped with PHP - they illustrate every conceivable situation.

Old way of retrieving arguments (deprecated)

Замечание: Deprecated parameter parsing API

This API is deprecated and superseded by the new ZEND parameter parsing API.

After having checked the number of arguments, you need to get access to the arguments themselves. This is done with the help of zend_get_parameters_ex():

zval **parameter;

if(zend_get_parameters_ex(1, &parameter) != SUCCESS)
  WRONG_PARAM_COUNT;
All arguments are stored in a zval container, which needs to be pointed to twice. The snippet above tries to retrieve one argument and make it available to us via the parameter pointer.

zend_get_parameters_ex() accepts at least two arguments. The first argument is the number of arguments to retrieve (which should match the number of arguments with which the function has been called; this is why it's important to check for correct call syntax). The second argument (and all following arguments) are pointers to pointers to pointers to zvals. (Confusing, isn't it?) All these pointers are required because Zend works internally with **zval; to adjust a local **zval in our function,zend_get_parameters_ex() requires a pointer to it.

The return value of zend_get_parameters_ex() can either be SUCCESS or FAILURE, indicating (unsurprisingly) success or failure of the argument processing. A failure is most likely related to an incorrect number of arguments being specified, in which case you should exit with WRONG_PARAM_COUNT.

To retrieve more than one argument, you can use a similar snippet:

zval **param1, **param2, **param3, **param4;

if(zend_get_parameters_ex(4, &param1, &param2, &param3, &param4) != SUCCESS)
    WRONG_PARAM_COUNT;

zend_get_parameters_ex() only checks whether you're trying to retrieve too many parameters. If the function is called with five arguments, but you're only retrieving three of them with zend_get_parameters_ex(), you won't get an error but will get the first three parameters instead. Subsequent calls of zend_get_parameters_ex() won't retrieve the remaining arguments, but will get the same arguments again.

Dealing with a Variable Number of Arguments/Optional Parameters

If your function is meant to accept a variable number of arguments, the snippets just described are sometimes suboptimal solutions. You have to create a line calling zend_get_parameters_ex() for every possible number of arguments, which is often unsatisfying.

For this case, you can use the function zend_get_parameters_array_ex(), which accepts the number of parameters to retrieve and an array in which to store them:

zval **parameter_array[4];

/* get the number of arguments */
argument_count = ZEND_NUM_ARGS();

/* see if it satisfies our minimal request (2 arguments) */
/* and our maximal acceptance (4 arguments) */
if(argument_count < 2 || argument_count > 4)
    WRONG_PARAM_COUNT;

/* argument count is correct, now retrieve arguments */
if(zend_get_parameters_array_ex(argument_count, parameter_array) != SUCCESS)
    WRONG_PARAM_COUNT;
First, the number of arguments is checked to make sure that it's in the accepted range. After that, zend_get_parameters_array_ex() is used to fill parameter_array with valid pointers to the argument values.

A very clever implementation of this can be found in the code handling PHP's fsockopen() located in ext/standard/fsock.c, as shown in PHP's implementation of variable arguments in fsockopen().. Don't worry if you don't know all the functions used in this source yet; we'll get to them shortly.

Пример #6 PHP's implementation of variable arguments in fsockopen().

pval **args[5];
int *sock=emalloc(sizeof(int));
int *sockp;
int arg_count=ARG_COUNT(ht);
int socketd = -1;
unsigned char udp = 0;
struct timeval timeout = { 60, 0 };
unsigned short portno;
unsigned long conv;
char *key = NULL;
FLS_FETCH();

if (arg_count > 5 || arg_count < 2 || zend_get_parameters_array_ex(arg_count,args)==FAILURE) {
    CLOSE_SOCK(1);
    WRONG_PARAM_COUNT;
}

switch(arg_count) {
    case 5:
        convert_to_double_ex(args[4]);
        conv = (unsigned long) (Z_DVAL_PP(args[4]) * 1000000.0);
        timeout.tv_sec = conv / 1000000;
        timeout.tv_usec = conv % 1000000;
        /* fall-through */
    case 4:
        if (!PZVAL_IS_REF(*args[3])) {
            php_error(E_WARNING,"error string argument to fsockopen not passed by reference");
        }
        pval_copy_constructor(*args[3]);
        ZVAL_EMPTY_STRING(*args[3]);
        /* fall-through */
    case 3:
        if (!PZVAL_IS_REF(*args[2])) {
            php_error(E_WARNING,"error argument to fsockopen not passed by reference");
            return;
        }
        ZVAL_LONG(*args[2], 0);
        break;
}

convert_to_string_ex(args[0]);
convert_to_long_ex(args[1]);
portno = (unsigned short) Z_LVAL_P(args[1]);

key = emalloc(Z_STRLEN_P(args[0]) + 10);

fsockopen() accepts two, three, four, or five parameters. After the obligatory variable declarations, the function checks for the correct range of arguments. Then it uses a fall-through mechanism in a switch() statement to deal with all arguments. The switch() statement starts with the maximum number of arguments being passed (five). After that, it automatically processes the case of four arguments being passed, then three, by omitting the otherwise obligatory break keyword in all stages. After having processed the last case, it exits the switch() statement and does the minimal argument processing needed if the function is invoked with only two arguments.

This multiple-stage type of processing, similar to a stairway, allows convenient processing of a variable number of arguments.

Accessing Arguments

To access arguments, it's necessary for each argument to have a clearly defined type. Again, PHP's extremely dynamic nature introduces some quirks. Because PHP never does any kind of type checking, it's possible for a caller to pass any kind of data to your functions, whether you want it or not. If you expect an integer, for example, the caller might pass an array, and vice versa - PHP simply won't notice.

To work around this, you have to use a set of API functions to force a type conversion on every argument that's being passed (see Argument Conversion Functions).

Note: All conversion functions expect a **zval as parameter.

Argument Conversion Functions
Function Description
convert_to_boolean_ex() Forces conversion to a Boolean type. Boolean values remain untouched. Longs, doubles, and strings containing 0 as well as NULL values will result in Boolean 0 (FALSE). Arrays and objects are converted based on the number of entries or properties, respectively, that they have. Empty arrays and objects are converted to FALSE; otherwise, to TRUE. All other values result in a Boolean 1 (TRUE).
convert_to_long_ex() Forces conversion to a long, the default integer type. NULL values, Booleans, resources, and of course longs remain untouched. Doubles are truncated. Strings containing an integer are converted to their corresponding numeric representation, otherwise resulting in 0. Arrays and objects are converted to 0 if empty, 1 otherwise.
convert_to_double_ex() Forces conversion to a double, the default floating-point type. NULL values, Booleans, resources, longs, and of course doubles remain untouched. Strings containing a number are converted to their corresponding numeric representation, otherwise resulting in 0.0. Arrays and objects are converted to 0.0 if empty, 1.0 otherwise.
convert_to_string_ex() Forces conversion to a string. Strings remain untouched. NULL values are converted to an empty string. Booleans containing TRUE are converted to "1", otherwise resulting in an empty string. Longs and doubles are converted to their corresponding string representation. Arrays are converted to the string "Array" and objects to the string "Object".
convert_to_array_ex(value) Forces conversion to an array. Arrays remain untouched. Objects are converted to an array by assigning all their properties to the array table. All property names are used as keys, property contents as values. NULL values are converted to an empty array. All other values are converted to an array that contains the specific source value in the element with the key 0.
convert_to_object_ex(value) Forces conversion to an object. Objects remain untouched. NULL values are converted to an empty object. Arrays are converted to objects by introducing their keys as properties into the objects and their values as corresponding property contents in the object. All other types result in an object with the property scalar , having the corresponding source value as content.
convert_to_null_ex(value) Forces the type to become a NULL value, meaning empty.

Замечание:

You can find a demonstration of the behavior in cross_conversion.php on the accompanying CD-ROM.

Cross-conversion behavior of PHP.

Using these functions on your arguments will ensure type safety for all data that's passed to you. If the supplied type doesn't match the required type, PHP forces dummy contents on the resulting value (empty strings, arrays, or objects, 0 for numeric values, FALSE for Booleans) to ensure a defined state.

Following is a quote from the sample module discussed previously, which makes use of the conversion functions:

zval **parameter;

if((ZEND_NUM_ARGS() != 1) || (zend_get_parameters_ex(1, &parameter) != SUCCESS))
{
    WRONG_PARAM_COUNT;
}

convert_to_long_ex(parameter);

RETURN_LONG(Z_LVAL_P(parameter));
After retrieving the parameter pointer, the parameter value is converted to a long (an integer), which also forms the return value of this function. Understanding access to the contents of the value requires a short discussion of the zval type, whose definition is shown in PHP/Zend zval type definition..

Пример #7 PHP/Zend zval type definition.

typedef pval zval;

typedef struct _zval_struct zval;

typedef union _zvalue_value {
    long lval;                 /* long value */
    double dval;               /* double value */
    struct {
        char *val;
        int len;
    } str;
    HashTable *ht;             /* hash table value */
    struct {
        zend_class_entry *ce;
        HashTable *properties;
    } obj;
} zvalue_value;

struct _zval_struct {
    /* Variable information */
    zvalue_value value;        /* value */
    unsigned char type;        /* active type */
    unsigned char is_ref;
    short refcount;
};

Actually, pval (defined in php.h) is only an alias of zval (defined in zend.h), which in turn refers to _zval_struct. This is a most interesting structure. _zval_struct is the "master" structure, containing the value structure, type, and reference information. The substructure zvalue_value is a union that contains the variable's contents. Depending on the variable's type, you'll have to access different members of this union. For a description of both structures, see Zend zval Structure, Zend zvalue_value Structure and Zend Variable Type Constants.

Zend zval Structure
Entry Description
value Union containing this variable's contents. See Zend zvalue_value Structure for a description.
type Contains this variable's type. For a list of available types, see Zend Variable Type Constants.
is_ref 0 means that this variable is not a reference; 1 means that this variable is a reference to another variable.
refcount The number of references that exist for this variable. For every new reference to the value stored in this variable, this counter is increased by 1. For every lost reference, this counter is decreased by 1. When the reference counter reaches 0, no references exist to this value anymore, which causes automatic freeing of the value.
Zend zvalue_value Structure
Entry Description
lval Use this property if the variable is of the type IS_LONG, IS_BOOLEAN, or IS_RESOURCE.
dval Use this property if the variable is of the type IS_DOUBLE.
str This structure can be used to access variables of the type IS_STRING. The member len contains the string length; the member val points to the string itself. Zend uses C strings; thus, the string length contains a trailing 0x00.
ht This entry points to the variable's hash table entry if the variable is an array.
obj Use this property if the variable is of the type IS_OBJECT.
Zend Variable Type Constants
Constant Description
IS_NULL Denotes a NULL (empty) value.
IS_LONG A long (integer) value.
IS_DOUBLE A double (floating point) value.
IS_STRING A string.
IS_ARRAY Denotes an array.
IS_OBJECT An object.
IS_BOOL A Boolean value.
IS_RESOURCE A resource (for a discussion of resources, see the appropriate section below).
IS_CONSTANT A constant (defined) value.

To access a long you access zval.value.lval, to access a double you use zval.value.dval, and so on. Because all values are stored in a union, trying to access data with incorrect union members results in meaningless output.

Accessing arrays and objects is a bit more complicated and is discussed later.

Dealing with Arguments Passed by Reference

If your function accepts arguments passed by reference that you intend to modify, you need to take some precautions.

What we didn't say yet is that under the circumstances presented so far, you don't have write access to any zval containers designating function parameters that have been passed to you. Of course, you can change any zval containers that you created within your function, but you mustn't change any zvals that refer to Zend-internal data!

We've only discussed the so-called *_ex() API so far. You may have noticed that the API functions we've used are called zend_get_parameters_ex() instead of zend_get_parameters(), convert_to_long_ex() instead of convert_to_long(), etc. The *_ex() functions form the so-called new "extended" Zend API. They give a minor speed increase over the old API, but as a tradeoff are only meant for providing read-only access.

Because Zend works internally with references, different variables may reference the same value. Write access to a zval container requires this container to contain an isolated value, meaning a value that's not referenced by any other containers. If a zval container were referenced by other containers and you changed the referenced zval, you would automatically change the contents of the other containers referencing this zval (because they'd simply point to the changed value and thus change their own value as well).

zend_get_parameters_ex() doesn't care about this situation, but simply returns a pointer to the desired zval containers, whether they consist of references or not. Its corresponding function in the traditional API, zend_get_parameters(), immediately checks for referenced values. If it finds a reference, it creates a new, isolated zval container; copies the referenced data into this newly allocated space; and then returns a pointer to the new, isolated value.

This action is called zval separation (or pval separation). Because the *_ex() API doesn't perform zval separation, it's considerably faster, while at the same time disabling write access.

To change parameters, however, write access is required. Zend deals with this situation in a special way: Whenever a parameter to a function is passed by reference, it performs automatic zval separation. This means that whenever you're calling a function like this in PHP, Zend will automatically ensure that $parameter is being passed as an isolated value, rendering it to a write-safe state:

my_function(&$parameter);

But this is not the case with regular parameters! All other parameters that are not passed by reference are in a read-only state.

This requires you to make sure that you're really working with a reference - otherwise you might produce unwanted results. To check for a parameter being passed by reference, you can use the macro PZVAL_IS_REF. This macro accepts a zval* to check if it is a reference or not. Examples are given in in Testing for referenced parameter passing..

Пример #8 Testing for referenced parameter passing.

zval *parameter;

if (zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "z", &parameter) == FAILURE)
    return;

/* check for parameter being passed by reference */
if (!PZVAL_IS_REF(parameter)) {
{
    zend_error(E_WARNING, "Parameter wasn't passed by reference");
    RETURN_NULL();
}

/* make changes to the parameter */
ZVAL_LONG(parameter, 10);
Testing for referenced parameter passing

Assuring Write Safety for Other Parameters

You might run into a situation in which you need write access to a parameter that's retrieved with zend_get_parameters_ex() but not passed by reference. For this case, you can use the macro SEPARATE_ZVAL, which does a zval separation on the provided container. The newly generated zval is detached from internal data and has only a local scope, meaning that it can be changed or destroyed without implying global changes in the script context:

zval **parameter;

/* retrieve parameter */
zend_get_parameters_ex(1, &parameter);

/* at this stage, <parameter> still is connected */
/* to Zend's internal data buffers */

/* make <parameter> write-safe */
SEPARATE_ZVAL(parameter);

/* now we can safely modify <parameter> */
/* without implying global changes */
SEPARATE_ZVAL uses emalloc() to allocate the new zval container, which means that even if you don't deallocate this memory yourself, it will be destroyed automatically upon script termination. However, doing a lot of calls to this macro without freeing the resulting containers will clutter up your RAM.

Note: As you can easily work around the lack of write access in the "traditional" API (with zend_get_parameters() and so on), this API seems to be obsolete, and is not discussed further in this chapter.

Creating Variables

When exchanging data from your own extensions with PHP scripts, one of the most important issues is the creation of variables. This section shows you how to deal with the variable types that PHP supports.

Overview

To create new variables that can be seen "from the outside" by the executing script, you need to allocate a new zval container, fill this container with meaningful values, and then introduce it to Zend's internal symbol table. This basic process is common to all variable creations:

zval *new_variable; 

/* allocate and initialize new container */
MAKE_STD_ZVAL(new_variable); 

/* set type and variable contents here, see the following sections */ 

/* introduce this variable by the name "new_variable_name" into the symbol table */
ZEND_SET_SYMBOL(EG(active_symbol_table), "new_variable_name", new_variable); 

/* the variable is now accessible to the script by using $new_variable_name */

The macro MAKE_STD_ZVAL allocates a new zval container using ALLOC_ZVAL and initializes it using INIT_ZVAL. As implemented in Zend at the time of this writing, initializing means setting the reference count to 1 and clearing the is_ref flag, but this process could be extended later - this is why it's a good idea to keep using MAKE_STD_ZVAL instead of only using ALLOC_ZVAL. If you want to optimize for speed (and you don't have to explicitly initialize the zval container here), you can use ALLOC_ZVAL, but this isn't recommended because it doesn't ensure data integrity.

ZEND_SET_SYMBOL takes care of introducing the new variable to Zend's symbol table. This macro checks whether the value already exists in the symbol table and converts the new symbol to a reference if so (with automatic deallocation of the old zval container). This is the preferred method if speed is not a crucial issue and you'd like to keep memory usage low.

Note that ZEND_SET_SYMBOL makes use of the Zend executor globals via the macro EG. By specifying EG(active_symbol_table), you get access to the currently active symbol table, dealing with the active, local scope. The local scope may differ depending on whether the function was invoked from within a function.

If you need to optimize for speed and don't care about optimal memory usage, you can omit the check for an existing variable with the same value and instead force insertion into the symbol table by using zend_hash_update():

zval *new_variable;

/* allocate and initialize new container */
MAKE_STD_ZVAL(new_variable);

/* set type and variable contents here, see the following sections */

/* introduce this variable by the name "new_variable_name" into the symbol table */
zend_hash_update(
    EG(active_symbol_table),
    "new_variable_name",
    strlen("new_variable_name") + 1,
    &new_variable,
    sizeof(zval *),
    NULL
);
This is actually the standard method used in most modules.

The variables generated with the snippet above will always be of local scope, so they reside in the context in which the function has been called. To create new variables in the global scope, use the same method but refer to another symbol table:

zval *new_variable;

// allocate and initialize new container
MAKE_STD_ZVAL(new_variable);

//
// set type and variable contents here
//

// introduce this variable by the name "new_variable_name" into the global symbol table
ZEND_SET_SYMBOL(&EG(symbol_table), "new_variable_name", new_variable);
The macro ZEND_SET_SYMBOL is now being called with a reference to the main, global symbol table by referring EG(symbol_table).

Note: The active_symbol_table variable is a pointer, but symbol_table is not. This is why you have to use EG(active_symbol_table) and &EG(symbol_table) as parameters to ZEND_SET_SYMBOL - it requires a pointer.

Similarly, to get a more efficient version, you can hardcode the symbol table update:

zval *new_variable;

// allocate and initialize new container
MAKE_STD_ZVAL(new_variable);

//
// set type and variable contents here
//

// introduce this variable by the name "new_variable_name" into the global symbol table
zend_hash_update(
    &EG(symbol_table),
    "new_variable_name",
    strlen("new_variable_name") + 1,
    &new_variable,
    sizeof(zval *),
    NULL
);
Creating variables with different scopes. shows a sample source that creates two variables - local_variable with a local scope and global_variable with a global scope (see Figure 9.7). The full example can be found on the CD-ROM.

Note: You can see that the global variable is actually not accessible from within the function. This is because it's not imported into the local scope using global $global_variable; in the PHP source.

Пример #9 Creating variables with different scopes.

ZEND_FUNCTION(variable_creation)
{
    zval *new_var1, *new_var2;

    MAKE_STD_ZVAL(new_var1);
    MAKE_STD_ZVAL(new_var2);

    ZVAL_LONG(new_var1, 10);
    ZVAL_LONG(new_var2, 5);

    ZEND_SET_SYMBOL(EG(active_symbol_table), "local_variable", new_var1);
    ZEND_SET_SYMBOL(&EG(symbol_table), "global_variable", new_var2);

    RETURN_NULL();

}
Creating variables with different scopes

Longs (Integers)

Now let's get to the assignment of data to variables, starting with longs. Longs are PHP's integers and are very simple to store. Looking at the zval.value container structure discussed earlier in this chapter, you can see that the long data type is directly contained in the union, namely in the lval field. The corresponding type value for longs is IS_LONG (see Creation of a long.).

Пример #10 Creation of a long.

zval *new_long;

MAKE_STD_ZVAL(new_long);

new_long-&gt;type = IS_LONG;
new_long-&gt;value.lval = 10;
Alternatively, you can use the macro ZVAL_LONG:
zval *new_long;

MAKE_STD_ZVAL(new_long);
ZVAL_LONG(new_long, 10);

Doubles (Floats)

Doubles are PHP's floats and are as easy to assign as longs, because their value is also contained directly in the union. The member in the zval.value container is dval; the corresponding type is IS_DOUBLE.

zval *new_double;

MAKE_STD_ZVAL(new_double);

new_double-&gt;type = IS_DOUBLE;
new_double-&gt;value.dval = 3.45;
Alternatively, you can use the macro ZVAL_DOUBLE:
zval *new_double;

MAKE_STD_ZVAL(new_double);
ZVAL_DOUBLE(new_double, 3.45);

Strings

Strings need slightly more effort. As mentioned earlier, all strings that will be associated with Zend's internal data structures need to be allocated using Zend's own memory-management functions. Referencing of static strings or strings allocated with standard routines is not allowed. To assign strings, you have to access the structure str in the zval.value container. The corresponding type is IS_STRING:

zval *new_string;
char *string_contents = "This is a new string variable";

MAKE_STD_ZVAL(new_string);

new_string-&gt;type = IS_STRING;
new_string-&gt;value.str.len = strlen(string_contents);
new_string-&gt;value.str.val = estrdup(string_contents);
Note the usage of Zend's estrdup() here. Of course, you can also use the predefined macro ZVAL_STRING:
zval *new_string;
char *string_contents = "This is a new string variable";

MAKE_STD_ZVAL(new_string);
ZVAL_STRING(new_string, string_contents, 1);
ZVAL_STRING accepts a third parameter that indicates whether the supplied string contents should be duplicated (using estrdup()). Setting this parameter to 1 causes the string to be duplicated; 0 simply uses the supplied pointer for the variable contents. This is most useful if you want to create a new variable referring to a string that's already allocated in Zend internal memory.

If you want to truncate the string at a certain position or you already know its length, you can use ZVAL_STRINGL(zval, string, length, duplicate), which accepts an explicit string length to be set for the new string. This macro is faster than ZVAL_STRING and also binary-safe.

To create empty strings, set the string length to 0 and use empty_string as contents:

new_string-&gt;type = IS_STRING;
new_string-&gt;value.str.len = 0;
new_string-&gt;value.str.val = empty_string;
Of course, there's a macro for this as well (ZVAL_EMPTY_STRING):
MAKE_STD_ZVAL(new_string);
ZVAL_EMPTY_STRING(new_string);

Booleans

Booleans are created just like longs, but have the type IS_BOOL. Allowed values in lval are 0 and 1:

zval *new_bool;

MAKE_STD_ZVAL(new_bool);

new_bool-&gt;type = IS_BOOL;
new_bool-&gt;value.lval = 1;
The corresponding macros for this type are ZVAL_BOOL (allowing specification of the value) as well as ZVAL_TRUE and ZVAL_FALSE (which explicitly set the value to TRUE and FALSE, respectively).

Arrays

Arrays are stored using Zend's internal hash tables, which can be accessed using the zend_hash_*() API. For every array that you want to create, you need a new hash table handle, which will be stored in the ht member of the zval.value container.

There's a whole API solely for the creation of arrays, which is extremely handy. To start a new array, you call array_init().

zval *new_array;

MAKE_STD_ZVAL(new_array);

array_init(new_array);
array_init() always returns SUCCESS.

To add new elements to the array, you can use numerous functions, depending on what you want to do. Zend's API for Associative Arrays, Zend's API for Indexed Arrays, Part 1 and Zend's API for Indexed Arrays, Part 2 describe these functions. All functions return FAILURE on failure and SUCCESS on success.

Zend's API for Associative Arrays
Function Description
add_assoc_long(zval *array, char *key, long n);() Adds an element of type long.
add_assoc_unset(zval *array, char *key);() Adds an unset element.
add_assoc_bool(zval *array, char *key, int b);() Adds a Boolean element.
add_assoc_resource(zval *array, char *key, int r);() Adds a resource to the array.
add_assoc_double(zval *array, char *key, double d);() Adds a floating-point value.
add_assoc_string(zval *array, char *key, char *str, int duplicate);() Adds a string to the array. The flag duplicate specifies whether the string contents have to be copied to Zend internal memory.
add_assoc_stringl(zval *array, char *key, char *str, uint length, int duplicate); () Adds a string with the desired length length to the array. Otherwise, behaves like add_assoc_string().
add_assoc_zval(zval *array, char *key, zval *value);() Adds a zval to the array. Useful for adding other arrays, objects, streams, etc...
Zend's API for Indexed Arrays, Part 1
Function Description
add_index_long(zval *array, uint idx, long n);() Adds an element of type long.
add_index_unset(zval *array, uint idx);() Adds an unset element.
add_index_bool(zval *array, uint idx, int b);() Adds a Boolean element.
add_index_resource(zval *array, uint idx, int r);() Adds a resource to the array.
add_index_double(zval *array, uint idx, double d);() Adds a floating-point value.
add_index_string(zval *array, uint idx, char *str, int duplicate);() Adds a string to the array. The flag duplicate specifies whether the string contents have to be copied to Zend internal memory.
add_index_stringl(zval *array, uint idx, char *str, uint length, int duplicate);() Adds a string with the desired length length to the array. This function is faster and binary-safe. Otherwise, behaves like add_index_string().
add_index_zval(zval *array, uint idx, zval *value);() Adds a zval to the array. Useful for adding other arrays, objects, streams, etc...
Zend's API for Indexed Arrays, Part 2
Function Description
add_next_index_long(zval *array, long n);() Adds an element of type long.
add_next_index_unset(zval *array);() Adds an unset element.
add_next_index_bool(zval *array, int b);() Adds a Boolean element.
add_next_index_resource(zval *array, int r);() Adds a resource to the array.
add_next_index_double(zval *array, double d);() Adds a floating-point value.
add_next_index_string(zval *array, char *str, int duplicate);() Adds a string to the array. The flag duplicate specifies whether the string contents have to be copied to Zend internal memory.
add_next_index_stringl(zval *array, char *str, uint length, int duplicate);() Adds a string with the desired length length to the array. This function is faster and binary-safe. Otherwise, behaves like add_index_string().
add_next_index_zval(zval *array, zval *value);() Adds a zval to the array. Useful for adding other arrays, objects, streams, etc...

All these functions provide a handy abstraction to Zend's internal hash API. Of course, you can also use the hash functions directly - for example, if you already have a zval container allocated that you want to insert into an array. This is done using zend_hash_update() for associative arrays (see Adding an element to an associative array.) and zend_hash_index_update() for indexed arrays (see Adding an element to an indexed array.):

Пример #11 Adding an element to an associative array.

zval *new_array, *new_element;
char *key = "element_key";

MAKE_STD_ZVAL(new_array);
MAKE_STD_ZVAL(new_element);

array_init(new_array);

ZVAL_LONG(new_element, 10);

if(zend_hash_update(new_array-&gt;value.ht, key, strlen(key) + 1, (void *)&new_element, sizeof(zval *), NULL) == FAILURE)
{
    // do error handling here
}

Пример #12 Adding an element to an indexed array.

zval *new_array, *new_element;
int key = 2;

MAKE_STD_ZVAL(new_array);
MAKE_STD_ZVAL(new_element);

array_init(new_array);

ZVAL_LONG(new_element, 10);

if(zend_hash_index_update(new_array-&gt;value.ht, key, (void *)&new_element, sizeof(zval *), NULL) == FAILURE)
{
    // do error handling here
}

To emulate the functionality of add_next_index_*(), you can use this:

zend_hash_next_index_insert(ht, zval **new_element, sizeof(zval *), NULL)

Note: To return arrays from a function, use array_init() and all following actions on the predefined variable return_value (given as argument to your exported function; see the earlier discussion of the call interface). You do not have to use MAKE_STD_ZVAL on this.

Tip: To avoid having to write new_array->value.ht every time, you can use HASH_OF(new_array), which is also recommended for compatibility and style reasons.

Objects

Since objects can be converted to arrays (and vice versa), you might have already guessed that they have a lot of similarities to arrays in PHP. Objects are maintained with the same hash functions, but there's a different API for creating them.

To initialize an object, you use the function object_init():

zval *new_object;

MAKE_STD_ZVAL(new_object);

if(object_init(new_object) != SUCCESS)
{
    // do error handling here
}
You can use the functions described in Zend's API for Object Creation to add members to your object.

Zend's API for Object Creation
Function Description
add_property_long(zval *object, char *key, long l);() Adds a long to the object.
add_property_unset(zval *object, char *key);() Adds an unset property to the object.
add_property_bool(zval *object, char *key, int b);() Adds a Boolean to the object.
add_property_resource(zval *object, char *key, long r);() Adds a resource to the object.
add_property_double(zval *object, char *key, double d);() Adds a double to the object.
add_property_string(zval *object, char *key, char *str, int duplicate);() Adds a string to the object.
add_property_stringl(zval *object, char *key, char *str, uint length, int duplicate);() Adds a string of the specified length to the object. This function is faster than add_property_string() and also binary-safe.
add_property_zval(zval *obect, char *key, zval *container):() Adds a zval container to the object. This is useful if you have to add properties which aren't simple types like integers or strings but arrays or other objects.

Resources

Resources are a special kind of data type in PHP. The term resources doesn't really refer to any special kind of data, but to an abstraction method for maintaining any kind of information. Resources are kept in a special resource list within Zend. Each entry in the list has a correspondending type definition that denotes the kind of resource to which it refers. Zend then internally manages all references to this resource. Access to a resource is never possible directly - only via a provided API. As soon as all references to a specific resource are lost, a corresponding shutdown function is called.

For example, resources are used to store database links and file descriptors. The de facto standard implementation can be found in the MySQL module, but other modules such as the Oracle module also make use of resources.

Замечание:

In fact, a resource can be a pointer to anything you need to handle in your functions (e.g. pointer to a structure) and the user only has to pass a single resource variable to your function.

To create a new resource you need to register a resource destruction handler for it. Since you can store any kind of data as a resource, Zend needs to know how to free this resource if its not longer needed. This works by registering your own resource destruction handler to Zend which in turn gets called by Zend whenever your resource can be freed (whether manually or automatically). Registering your resource handler within Zend returns you the resource type handle for that resource. This handle is needed whenever you want to access a resource of this type later and is most of time stored in a global static variable within your extension. There is no need to worry about thread safety here because you only register your resource handler once during module initialization.

The Zend function to register your resource handler is defined as:

ZEND_API int zend_register_list_destructors_ex(rsrc_dtor_func_t ld, rsrc_dtor_func_t pld, char *type_name, int module_number);

There are two different kinds of resource destruction handlers you can pass to this function: a handler for normal resources and a handler for persistent resources. Persistent resources are for example used for database connection. When registering a resource, either of these handlers must be given. For the other handler just pass NULL.

zend_register_list_destructors_ex() accepts the following parameters:

ld Normal resource destruction handler callback
pld Pesistent resource destruction handler callback
type_name A string specifying the name of your resource. It's always a good thing to specify a unique name within PHP for the resource type so when the user for example calls var_dump($resource); he also gets the name of the resource.
module_number The module_number is automatically available in your PHP_MINIT_FUNCTION function and therefore you just pass it over.
The return value is a unique integer ID for your resource type.

The resource destruction handler (either normal or persistent resources) has the following prototype:

void resource_destruction_handler(zend_rsrc_list_entry *rsrc TSRMLS_DC);
The passed rsrc is a pointer to the following structure:
typedef struct _zend_rsrc_list_entry {

    void *ptr;
    int type;
    int refcount;

} zend_rsrc_list_entry;
The member void *ptr is the actual pointer to your resource.

Now we know how to start things, we define our own resource we want register within Zend. It is only a simple structure with two integer members:

typedef struct {

    int resource_link;
    int resource_type;

} my_resource;
Our resource destruction handler is probably going to look something like this:
void my_destruction_handler(zend_rsrc_list_entry *rsrc TSRMLS_DC) {

    // You most likely cast the void pointer to your structure type

    my_resource *my_rsrc = (my_resource *) rsrc->ptr;

    // Now do whatever needs to be done with you resource. Closing
    // Files, Sockets, freeing additional memory, etc.
    // Also, don't forget to actually free the memory for your resource too!

    do_whatever_needs_to_be_done_with_the_resource(my_rsrc);
}

Замечание:

One important thing to mention: If your resource is a rather complex structure which also contains pointers to memory you allocated during runtime you have to free them before freeing the resource itself!

Now that we have defined

  1. what our resource is and

  2. our resource destruction handler

we can go on and do the rest of the steps:
  1. create a global variable within the extension holding the resource ID so it can be accessed from every function which needs it

  2. define the resource name

  3. write the resource destruction handler

  4. and finally register the handler

// Somewhere in your extension, define the variable for your registered resources.
    // If you wondered what 'le' stands for: it simply means 'list entry'.
    static int le_myresource;

    // It's nice to define your resource name somewhere
    #define le_myresource_name  "My type of resource"

    [...]

    // Now actually define our resource destruction handler
    void my_destruction_handler(zend_rsrc_list_entry *rsrc TSRMLS_DC) {

        my_resource *my_rsrc = (my_resource *) rsrc->ptr;
        do_whatever_needs_to_be_done_with_the_resource(my_rsrc);
    }

    [...]

    PHP_MINIT_FUNCTION(my_extension) {

        // Note that 'module_number' is already provided through the
        // PHP_MINIT_FUNCTION() function definition.

        le_myresource = zend_register_list_destructors_ex(my_destruction_handler, NULL, le_myresource_name, module_number);

        // You can register additional resources, initialize
        // your global vars, constants, whatever.
    }

To actually register a new resource you use can either use the zend_register_resource() function or the ZEND_REGISTER_RESOURE() macro, both defined in zend_list.h. Although the arguments for both map 1:1 it's a good idea to always use macros to be upwards compatible:

int ZEND_REGISTER_RESOURCE(zval *rsrc_result, void *rsrc_pointer, int rsrc_type);
rsrc_result This is an already initialized zval * container.
rsrc_pointer Your resource pointer you want to store.
rsrc_type The type which you received when you registered the resource destruction handler. If you followed the naming scheme this would be le_myresource.
The return value is a unique integer identifier for that resource.

What is really going on when you register a new resource is it gets inserted in an internal list in Zend and the result is just stored in the given zval * container:

rsrc_id = zend_list_insert(rsrc_pointer, rsrc_type);

    if (rsrc_result) {
        rsrc_result->value.lval = rsrc_id;
        rsrc_result->type = IS_RESOURCE;
    }

    return rsrc_id;
The returned rsrc_id uniquely identifies the newly registered resource. You can use the macro RETURN_RESOURE to return it to the user:
    RETURN_RESOURCE(rsrc_id)

Замечание:

It is common practice that if you want to return the resource immediately to the user you specify the return_value as the zval * container.

Zend now keeps track of all references to this resource. As soon as all references to the resource are lost, the destructor that you previously registered for this resource is called. The nice thing about this setup is that you don't have to worry about memory leakages introduced by allocations in your module - just register all memory allocations that your calling script will refer to as resources. As soon as the script decides it doesn't need them anymore, Zend will find out and tell you.

Now that the user got his resource, at some point he is passing it back to one of your functions. The value.lval inside the zval * container contains the key to your resource and thus can be used to fetch the resource with the following macro: ZEND_FETCH_RESOURCE:

ZEND_FETCH_RESOURCE(rsrc, rsrc_type, rsrc_id, default_rsrc_id, resource_type_name, resource_type)
rsrc This is your pointer which will point to your previously registered resource.
rsrc_type This is the typecast argument for your pointer, e.g. myresource *.
rsrc_id This is the address of the zval *container the user passed to your function, e.g. &z_resource if zval *z_resource is given.
default_rsrc_id This integer specifies the default resource ID if no resource could be fetched or -1.
resource_type_name This is the name of the requested resource. It's a string and is used when the resource can't be found or is invalid to form a meaningful error message.
resource_type The resource_type you got back when registering the resource destruction handler. In our example this was le_myresource.
This macro has no return value. It is for the developers convenience and takes care of TSRMLS arguments passing and also does check if the resource could be fetched. It throws a warning message and returns the current PHP function with NULL if there was a problem retrieving the resource.

To force removal of a resource from the list, use the function zend_list_delete(). You can also force the reference count to increase if you know that you're creating another reference for a previously allocated value (for example, if you're automatically reusing a default database link). For this case, use the function zend_list_addref(). To search for previously allocated resource entries, use zend_list_find(). The complete API can be found in zend_list.h.

Macros for Automatic Global Variable Creation

In addition to the macros discussed earlier, a few macros allow easy creation of simple global variables. These are nice to know in case you want to introduce global flags, for example. This is somewhat bad practice, but Table Macros for Global Variable Creation describes macros that do exactly this task. They don't need any zval allocation; you simply have to supply a variable name and value.

Macros for Global Variable Creation
Macro Description
SET_VAR_STRING(name, value) Creates a new string.
SET_VAR_STRINGL(name, value, length) Creates a new string of the specified length. This macro is faster than SET_VAR_STRING and also binary-safe.
SET_VAR_LONG(name, value) Creates a new long.
SET_VAR_DOUBLE(name, value) Creates a new double.

Creating Constants

Zend supports the creation of true constants (as opposed to regular variables). Constants are accessed without the typical dollar sign ($) prefix and are available in all scopes. Examples include TRUE and FALSE, to name just two.

To create your own constants, you can use the macros in Macros for Creating Constants. All the macros create a constant with the specified name and value.

You can also specify flags for each constant:

  • CONST_CS - This constant's name is to be treated as case sensitive.

  • CONST_PERSISTENT - This constant is persistent and won't be "forgotten" when the current process carrying this constant shuts down.

To use the flags, combine them using a inary OR:
 // register a new constant of type "long"
     REGISTER_LONG_CONSTANT("NEW_MEANINGFUL_CONSTANT", 324, CONST_CS |
     CONST_PERSISTENT); 
There are two types of macros - REGISTER_*_CONSTANT andREGISTER_MAIN_*_CONSTANT. The first type creates constants bound to the current module. These constants are dumped from the symbol table as soon as the module that registered the constant is unloaded from memory. The second type creates constants that remain in the symbol table independently of the module.

Macros for Creating Constants
Macro Description
REGISTER_LONG_CONSTANT(name, value, flags) REGISTER_MAIN_LONG_CONSTANT(name, value, flags) Registers a new constant of type long.
REGISTER_DOUBLE_CONSTANT(name, value, flags) REGISTER_MAIN_DOUBLE_CONSTANT(name, value, flags) Registers a new constant of type double.
REGISTER_STRING_CONSTANT(name, value, flags) REGISTER_MAIN_STRING_CONSTANT(name, value, flags) Registers a new constant of type string. The specified string must reside in Zend's internal memory.
REGISTER_STRINGL_CONSTANT(name, value, length, flags) REGISTER_MAIN_STRINGL_CONSTANT(name, value, length, flags) Registers a new constant of type string. The string length is explicitly set to length. The specified string must reside in Zend's internal memory.

Duplicating Variable Contents: The Copy Constructor

Sooner or later, you may need to assign the contents of one zval container to another. This is easier said than done, since the zval container doesn't contain only type information, but also references to places in Zend's internal data. For example, depending on their size, arrays and objects may be nested with lots of hash table entries. By assigning one zval to another, you avoid duplicating the hash table entries, using only a reference to them (at most).

To copy this complex kind of data, use the copy constructor. Copy constructors are typically defined in languages that support operator overloading, with the express purpose of copying complex types. If you define an object in such a language, you have the possibility of overloading the "=" operator, which is usually responsible for assigning the contents of the rvalue (result of the evaluation of the right side of the operator) to the lvalue (same for the left side).

Overloading means assigning a different meaning to this operator, and is usually used to assign a function call to an operator. Whenever this operator would be used on such an object in a program, this function would be called with the lvalue and rvalue as parameters. Equipped with that information, it can perform the operation it intends the "=" operator to have (usually an extended form of copying).

This same form of "extended copying" is also necessary for PHP's zval containers. Again, in the case of an array, this extended copying would imply re-creation of all hash table entries relating to this array. For strings, proper memory allocation would have to be assured, and so on.

Zend ships with such a function, called zend_copy_ctor() (the previous PHP equivalent was pval_copy_constructor()).

A most useful demonstration is a function that accepts a complex type as argument, modifies it, and then returns the argument:

zval *parameter;

if (zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "z", &parameter) == FAILURE)
   return;
}

// do modifications to the parameter here

// now we want to return the modified container:
*return_value = *parameter;
zval_copy_ctor(return_value);

The first part of the function is plain-vanilla argument retrieval. After the (left out) modifications, however, it gets interesting: The container of parameter is assigned to the (predefined) return_value container. Now, in order to effectively duplicate its contents, the copy constructor is called. The copy constructor works directly with the supplied argument, and the standard return values are FAILURE on failure and SUCCESS on success.

If you omit the call to the copy constructor in this example, both parameter and return_value would point to the same internal data, meaning that return_value would be an illegal additional reference to the same data structures. Whenever changes occurred in the data that parameter points to, return_value might be affected. Thus, in order to create separate copies, the copy constructor must be used.

The copy constructor's counterpart in the Zend API, the destructor zval_dtor(), does the opposite of the constructor.

Returning Values

Returning values from your functions to PHP was described briefly in an earlier section; this section gives the details. Return values are passed via the return_value variable, which is passed to your functions as argument. The return_value argument consists of a zval container (see the earlier discussion of the call interface) that you can freely modify. The container itself is already allocated, so you don't have to run MAKE_STD_ZVAL on it. Instead, you can access its members directly.

To make returning values from functions easier and to prevent hassles with accessing the internal structures of the zval container, a set of predefined macros is available (as usual). These macros automatically set the correspondent type and value, as described in Predefined Macros for Returning Values from a Function and Predefined Macros for Setting the Return Value of a Function.

Замечание:

The macros in Predefined Macros for Returning Values from a Function automatically return from your function, those in Predefined Macros for Setting the Return Value of a Function only set the return value; they don't return from your function.

Predefined Macros for Returning Values from a Function
Macro Description
RETURN_RESOURCE(resource) Returns a resource.
RETURN_BOOL(bool) Returns a Boolean.
RETURN_NULL() Returns nothing (a NULL value).
RETURN_LONG(long) Returns a long.
RETURN_DOUBLE(double) Returns a double.
RETURN_STRING(string, duplicate) Returns a string. The duplicate flag indicates whether the string should be duplicated using estrdup().
RETURN_STRINGL(string, length, duplicate) Returns a string of the specified length; otherwise, behaves like RETURN_STRING. This macro is faster and binary-safe, however.
RETURN_EMPTY_STRING() Returns an empty string.
RETURN_FALSE Returns Boolean false.
RETURN_TRUE Returns Boolean true.
Predefined Macros for Setting the Return Value of a Function
Macro Description
RETVAL_RESOURCE(resource) Sets the return value to the specified resource.
RETVAL_BOOL(bool) Sets the return value to the specified Boolean value.
RETVAL_NULL Sets the return value to NULL.
RETVAL_LONG(long) Sets the return value to the specified long.
RETVAL_DOUBLE(double) Sets the return value to the specified double.
RETVAL_STRING(string, duplicate) Sets the return value to the specified string and duplicates it to Zend internal memory if desired (see also RETURN_STRING).
RETVAL_STRINGL(string, length, duplicate) Sets the return value to the specified string and forces the length to become length (see also RETVAL_STRING). This macro is faster and binary-safe, and should be used whenever the string length is known.
RETVAL_EMPTY_STRING Sets the return value to an empty string.
RETVAL_FALSE Sets the return value to Boolean false.
RETVAL_TRUE Sets the return value to Boolean true.

Complex types such as arrays and objects can be returned by using array_init() and object_init(), as well as the corresponding hash functions on return_value. Since these types cannot be constructed of trivial information, there are no predefined macros for them.

Printing Information

Often it's necessary to print messages to the output stream from your module, just as print would be used within a script. PHP offers functions for most generic tasks, such as printing warning messages, generating output for phpinfo(), and so on. The following sections provide more details. Examples of these functions can be found on the CD-ROM.

zend_printf()

zend_printf() works like the standard printf(), except that it prints to Zend's output stream.

zend_error()

zend_error() can be used to generate error messages. This function accepts two arguments; the first is the error type (see zend_errors.h), and the second is the error message.

zend_error(E_WARNING, "This function has been called with empty arguments");
Zend's Predefined Error Messages. shows a list of possible values (see below). These values are also referred to in php.ini. Depending on which error type you choose, your messages will be logged.
Zend's Predefined Error Messages.
Error Description
E_ERROR Signals an error and terminates execution of the script immediately.
E_WARNING Signals a generic warning. Execution continues.
E_PARSE Signals a parser error. Execution continues.
E_NOTICE Signals a notice. Execution continues. Note that by default the display of this type of error messages is turned off in php.ini.
E_CORE_ERROR Internal error by the core; shouldn't be used by user-written modules.
E_COMPILE_ERROR Internal error by the compiler; shouldn't be used by user-written modules.
E_COMPILE_WARNING Internal warning by the compiler; shouldn't be used by user-written modules.
Display of warning messages in the browser.

Including Output in phpinfo()

After creating a real module, you'll want to show information about the module in phpinfo() (in addition to the module name, which appears in the module list by default). PHP allows you to create your own section in the phpinfo() output with the ZEND_MINFO() function. This function should be placed in the module descriptor block (discussed earlier) and is always called whenever a script calls phpinfo().

PHP automatically prints a section in phpinfo() for you if you specify the ZEND_MINFO function, including the module name in the heading. Everything else must be formatted and printed by you.

Typically, you can print an HTML table header using php_info_print_table_start() and then use the standard functions php_info_print_table_header() and php_info_print_table_row(). As arguments, both take the number of columns (as integers) and the column contents (as strings). Source code and screenshot for output in phpinfo. shows a source example and its output. To print the table footer, use php_info_print_table_end().

Пример #13 Source code and screenshot for output in phpinfo().

php_info_print_table_start();
php_info_print_table_header(2, "First column", "Second column");
php_info_print_table_row(2, "Entry in first row", "Another entry");
php_info_print_table_row(2, "Just to fill", "another row here");
php_info_print_table_end();
Output of phpinfo()

Execution Information

You can also print execution information, such as the current file being executed. The name of the function currently being executed can be retrieved using the function get_active_function_name(). This function returns a pointer to the function name and doesn't accept any arguments. To retrieve the name of the file currently being executed, use zend_get_executed_filename(). This function accesses the executor globals, which are passed to it using the TSRMLS_C macro. The executor globals are automatically available to every function that's called directly by Zend (they're part of the INTERNAL_FUNCTION_PARAMETERS described earlier in this chapter). If you want to access the executor globals in another function that doesn't have them available automatically, call the macro TSRMLS_FETCH() once in that function; this will introduce them to your local scope.

Finally, the line number currently being executed can be retrieved using the function zend_get_executed_lineno(). This function also requires the executor globals as arguments. For examples of these functions, see Printing execution information..

Пример #14 Printing execution information.

zend_printf("The name of the current function is %s&lt;br&gt;", get_active_function_name(TSRMLS_C));
zend_printf("The file currently executed is %s&lt;br&gt;", zend_get_executed_filename(TSRMLS_C));
zend_printf("The current line being executed is %i&lt;br&gt;", zend_get_executed_lineno(TSRMLS_C));
Printing execution information

Startup and Shutdown Functions

Startup and shutdown functions can be used for one-time initialization and deinitialization of your modules. As discussed earlier in this chapter (see the description of the Zend module descriptor block), there are module, and request startup and shutdown events.

The module startup and shutdown functions are called whenever a module is loaded and needs initialization; the request startup and shutdown functions are called every time a request is processed (meaning that a file is being executed).

For dynamic extensions, module and request startup/shutdown events happen at the same time.

Declaration and implementation of these functions can be done with macros; see the earlier section "Declaration of the Zend Module Block" for details.

Calling User Functions

You can call user functions from your own modules, which is very handy when implementing callbacks; for example, for array walking, searching, or simply for event-based programs.

User functions can be called with the function call_user_function_ex(). It requires a hash value for the function table you want to access, a pointer to an object (if you want to call a method), the function name, return value, number of arguments, argument array, and a flag indicating whether you want to perform zval separation.

ZEND_API int call_user_function_ex(HashTable *function_table, zval *object,
zval *function_name, zval **retval_ptr_ptr,
int param_count, zval **params[],
int no_separation);

Note that you don't have to specify both function_table and object; either will do. If you want to call a method, you have to supply the object that contains this method, in which case call_user_function()automatically sets the function table to this object's function table. Otherwise, you only need to specify function_table and can set object to NULL.

Usually, the default function table is the "root" function table containing all function entries. This function table is part of the compiler globals and can be accessed using the macro CG. To introduce the compiler globals to your function, call the macro TSRMLS_FETCH once.

The function name is specified in a zval container. This might be a bit surprising at first, but is quite a logical step, since most of the time you'll accept function names as parameters from calling functions within your script, which in turn are contained in zval containers again. Thus, you only have to pass your arguments through to this function. This zval must be of type IS_STRING.

The next argument consists of a pointer to the return value. You don't have to allocate memory for this container; the function will do so by itself. However, you have to destroy this container (using zval_dtor()) afterward!

Next is the parameter count as integer and an array containing all necessary parameters. The last argument specifies whether the function should perform zval separation - this should always be set to 0. If set to 1, the function consumes less memory but fails if any of the parameters need separation.

Calling user functions. shows a small demonstration of calling a user function. The code calls a function that's supplied to it as argument and directly passes this function's return value through as its own return value. Note the use of the constructor and destructor calls at the end - it might not be necessary to do it this way here (since they should be separate values, the assignment might be safe), but this is bulletproof.

Пример #15 Calling user functions.

zval **function_name;
zval *retval;

if((ZEND_NUM_ARGS() != 1) || (zend_get_parameters_ex(1, &function_name) != SUCCESS))
{
    WRONG_PARAM_COUNT;
}

if((*function_name)->type != IS_STRING)
{
    zend_error(E_ERROR, "Function requires string argument");
}

TSRMSLS_FETCH();

if(call_user_function_ex(CG(function_table), NULL, *function_name, &retval, 0, NULL, 0) != SUCCESS)
{
    zend_error(E_ERROR, "Function call failed");
}

zend_printf("We have %i as type\n", retval->type);

*return_value = *retval;
zval_copy_ctor(return_value);
zval_ptr_dtor(&retval);

<?php

dl("call_userland.so");

function test_function()
{
    echo "We are in the test function!\n";
    return 'hello';
}

$return_value = call_userland("test_function");

echo "Return value: '$return_value'";
?>

Результат выполнения данного примера:

We are in the test function!
We have 3 as type
Return value: 'hello'

Initialization File Support

PHP 4 features a redesigned initialization file support. It's now possible to specify default initialization entries directly in your code, read and change these values at runtime, and create message handlers for change notifications.

To create an .ini section in your own module, use the macros PHP_INI_BEGIN() to mark the beginning of such a section and PHP_INI_END() to mark its end. In between you can use PHP_INI_ENTRY() to create entries.

PHP_INI_BEGIN()
PHP_INI_ENTRY("first_ini_entry",  "has_string_value", PHP_INI_ALL, NULL)
PHP_INI_ENTRY("second_ini_entry", "2",                PHP_INI_SYSTEM, OnChangeSecond)
PHP_INI_ENTRY("third_ini_entry",  "xyz",              PHP_INI_USER, NULL)
PHP_INI_END()
The PHP_INI_ENTRY() macro accepts four parameters: the entry name, the entry value, its change permissions, and a pointer to a change-notification handler. Both entry name and value must be specified as strings, regardless of whether they really are strings or integers.

The permissions are grouped into three sections:PHP_INI_SYSTEM allows a change only directly in the php.ini file; PHP_INI_USER allows a change to be overridden by a user at runtime using additional configuration files, such as .htaccess; and PHP_INI_ALL allows changes to be made without restrictions. There's also a fourth level, PHP_INI_PERDIR, for which we couldn't verify its behavior yet.

The fourth parameter consists of a pointer to a change-notification handler. Whenever one of these initialization entries is changed, this handler is called. Such a handler can be declared using the PHP_INI_MH macro:

PHP_INI_MH(OnChangeSecond);             // handler for ini-entry "second_ini_entry"

// specify ini-entries here

PHP_INI_MH(OnChangeSecond)
{

    zend_printf("Message caught, our ini entry has been changed to %s&lt;br&gt;", new_value);

    return(SUCCESS);

}
The new value is given to the change handler as string in the variable new_value. When looking at the definition of PHP_INI_MH, you actually have a few parameters to use:
#define PHP_INI_MH(name) int name(php_ini_entry *entry, char *new_value,
                                  uint new_value_length, void *mh_arg1,
                                  void *mh_arg2, void *mh_arg3)
All these definitions can be found in php_ini.h. Your message handler will have access to a structure that contains the full entry, the new value, its length, and three optional arguments. These optional arguments can be specified with the additional macros PHP_INI_ENTRY1 (allowing one additional argument), PHP_INI_ENTRY2 (allowing two additional arguments), and PHP_INI_ENTRY3 (allowing three additional arguments).

The change-notification handlers should be used to cache initialization entries locally for faster access or to perform certain tasks that are required if a value changes. For example, if a constant connection to a certain host is required by a module and someone changes the hostname, automatically terminate the old connection and attempt a new one.

Access to initialization entries can also be handled with the macros shown in Macros to Access Initialization Entries in PHP.

Macros to Access Initialization Entries in PHP
Macro Description
INI_INT(name) Returns the current value of entry name as integer (long).
INI_FLT(name) Returns the current value of entry name as float (double).
INI_STR(name) Returns the current value of entry name as string. Note: This string is not duplicated, but instead points to internal data. Further access requires duplication to local memory.
INI_BOOL(name) Returns the current value of entry name as Boolean (defined as zend_bool, which currently means unsigned char).
INI_ORIG_INT(name) Returns the original value of entry name as integer (long).
INI_ORIG_FLT(name) Returns the original value of entry name as float (double).
INI_ORIG_STR(name) Returns the original value of entry name as string. Note: This string is not duplicated, but instead points to internal data. Further access requires duplication to local memory.
INI_ORIG_BOOL(name) Returns the original value of entry name as Boolean (defined as zend_bool, which currently means unsigned char).

Finally, you have to introduce your initialization entries to PHP. This can be done in the module startup and shutdown functions, using the macros REGISTER_INI_ENTRIES() and UNREGISTER_INI_ENTRIES():

ZEND_MINIT_FUNCTION(mymodule)
{

    REGISTER_INI_ENTRIES();

}

ZEND_MSHUTDOWN_FUNCTION(mymodule)
{

    UNREGISTER_INI_ENTRIES();

}

Where to Go from Here

You've learned a lot about PHP. You now know how to create dynamic loadable modules and statically linked extensions. You've learned how PHP and Zend deal with internal storage of variables and how you can create and access these variables. You know quite a set of tool functions that do a lot of routine tasks such as printing informational texts, automatically introducing variables to the symbol table, and so on.

Even though this chapter often had a mostly "referential" character, we hope that it gave you insight on how to start writing your own extensions. For the sake of space, we had to leave out a lot; we suggest that you take the time to study the header files and some modules (especially the ones in the ext/standard directory and the MySQL module, as these implement commonly known functionality). This will give you an idea of how other people have used the API functions - particularly those that didn't make it into this chapter.

Reference: Some Configuration Macros

config.m4

The file config.m4 is processed by buildconf and must contain all the instructions to be executed during configuration. For example, these can include tests for required external files, such as header files, libraries, and so on. PHP defines a set of macros that can be used in this process, the most useful of which are described in M4 Macros for config.m4.

M4 Macros for config.m4
Macro Description
AC_MSG_CHECKING(message) Prints a "checking <message>" text during configure.
AC_MSG_RESULT(value) Gives the result to AC_MSG_CHECKING; should specify either yes or no as value.
AC_MSG_ERROR(message) Prints message as error message during configure and aborts the script.
AC_DEFINE(name,value,description) Adds #define to php_config.h with the value of value and a comment that says description (this is useful for conditional compilation of your module).
AC_ADD_INCLUDE(path) Adds a compiler include path; for example, used if the module needs to add search paths for header files.
AC_ADD_LIBRARY_WITH_PATH(libraryname,librarypath) Specifies an additional library to link.
AC_ARG_WITH(modulename,description,unconditionaltest,conditionaltest) Quite a powerful macro, adding the module with description to the configure --help output. PHP checks whether the option --with-<modulename> is given to the configure script. If so, it runs the script unconditionaltest (for example, --with-myext=yes), in which case the value of the option is contained in the variable $withval. Otherwise, it executes conditionaltest.
PHP_EXTENSION(modulename, [shared]) This macro is a must to call for PHP to configure your extension. You can supply a second argument in addition to your module name, indicating whether you intend compilation as a shared module. This will result in a definition at compile time for your source as COMPILE_DL_<modulename>.

API Macros

A set of macros was introduced into Zend's API that simplify access to zval containers (see API Macros for Accessing zval Containers).

API Macros for Accessing zval Containers
Macro Refers to
Z_LVAL(zval) (zval).value.lval
Z_DVAL(zval) (zval).value.dval
Z_STRVAL(zval) (zval).value.str.val
Z_STRLEN(zval) (zval).value.str.len
Z_ARRVAL(zval) (zval).value.ht
Z_LVAL_P(zval) (*zval).value.lval
Z_DVAL_P(zval) (*zval).value.dval
Z_STRVAL_P(zval_p) (*zval).value.str.val
Z_STRLEN_P(zval_p) (*zval).value.str.len
Z_ARRVAL_P(zval_p) (*zval).value.ht
Z_LVAL_PP(zval_pp) (**zval).value.lval
Z_DVAL_PP(zval_pp) (**zval).value.dval
Z_STRVAL_PP(zval_pp) (**zval).value.str.val
Z_STRLEN_PP(zval_pp) (**zval).value.str.len
Z_ARRVAL_PP(zval_pp) (**zval).value.ht

Коментарии

Distinction between --with and --enable : the "something external" means for exemple a shared object. If you are writing a C wrapper for an existing .so library, you should use --with

Do not forget the "cache" effect to modifyng M4 files. When you are testing and getting erros, be sure to delete config.cache before re-running buildconf and ./configure (I spent an hour looking for an error that was not there any more because of that).

HTH and happy developpment.
2002-01-04 18:39:30
http://php5.kiev.ua/manual/ru/internals2.ze1.zendapi.html
Автор:
There are also the following functions to add zvals to an array or hash:

ZEND_API int add_index_zval(zval *arg, uint index, zval *value);
ZEND_API int add_next_index_zval(zval *arg, zval *value);
ZEND_API int add_assoc_zval_ex(zval *arg, char *key, uint key_len, zval *value)
add_assoc_zval(__arg, __key, __value)
2002-03-17 08:48:47
http://php5.kiev.ua/manual/ru/internals2.ze1.zendapi.html
Автор:
object_init() and object_init_ex() are not calling the constructor of a class. You have to do this by yourself after creating the object.
2002-03-18 10:32:29
http://php5.kiev.ua/manual/ru/internals2.ze1.zendapi.html
Concerning all add_*_stringl() functions : 
they do not behave like snprintf() for instance, i.e. the length of the string is not a *maximum length* but an *exact* length, and you end up with null '\000' or '\@'  caracters in your PHP string if the length parameter is greater than the actual length of the string to be associated with return_value.

Yes, it is clearly written but still a trick if you are used to strncpy() or snprintf().
HTH
2002-03-26 13:58:09
http://php5.kiev.ua/manual/ru/internals2.ze1.zendapi.html
Автор:
An information that is missing here: The function name parameter can be an array with two elements. The first element is an object reference or a class name and the second element is the method name. Zend recognizes if the parameter is a string (which results in a normal function call or a normal method call if the object parameter is used) or if it is an array.
2002-03-28 07:43:23
http://php5.kiev.ua/manual/ru/internals2.ze1.zendapi.html
Автор:
Because it is not explained how the arg_types parameter works, I'll try to explain it myself: The arg_types parameter is an array of bytes. The first byte marks how many arg_type-specifiers follows. There are the following macros which can be used to regulate the reference forcing and I interprete them like this (No guarentee):

BYREF_NONE = Force passing by value
BYREF_FORCE = Force passing by reference
BYREF_ALLOW = Allow passing by reference
BYREF_FORCE_REST = ???

Commonly the arg_types parameter is used like this:

static unsigned char third_argument_force_ref[] = { 3, BYREF_NONE, BYREF_NONE, BYREF_FORCE };
ZEND_FE(foobar, third_argument_force_ref)

Note that the first element in the array does NOT specify how many arguments the function is expecting, only how many arg_type-Specifiers follows. Checking of the number of arguments has to be done in the function body itself (i.E. by using the zend_parse_parameters() function)
2002-03-28 07:57:21
http://php5.kiev.ua/manual/ru/internals2.ze1.zendapi.html
Автор:
These macros can be used to access the boolean value of a zval. Yes, you can use Z_LVAL* for booleans, too, but these macros also do a type cast to zend_bool:

Z_BVAL(zval)
Z_BVAL_P(zval)
Z_BVAL_PP(zval)
2002-04-06 06:33:54
http://php5.kiev.ua/manual/ru/internals2.ze1.zendapi.html
Автор:
To complete the macro list:

Access an object:
  Z_OBJ(zval)
  Z_OBJ_P(zval)
  Z_OBJ_PP(zval)

Access object property hash table:
  Z_OBJPROP(zval)
  Z_OBJPROP_P(zval)
  Z_OBJPROP_PP(zval)

Access object class entry:
  Z_OBJCE(zval)
  Z_OBJCE_P(zval)
  Z_OBJCE_PP(zval)

Access a ressource (which is fairly the same as Z_LVAL*):
  Z_RESVAL(zval)
  Z_RESVAL_P(zval)
  Z_RESVAL_PP(zval)
2002-04-06 06:41:14
http://php5.kiev.ua/manual/ru/internals2.ze1.zendapi.html
Автор:
If you are using one of the above macros you definitely want to use one of those convert-functions if you are not sure what data type is stored in the zval:

  convert_to_string(zval_p)
  convert_to_long(zval_p)
  convert_to_double(zval_p)
  convert_to_boolean(zval_p)
  convert_to_array(zval_p)
  convert_to_object(zval_p)

Otherwise you may get undefined results, because Z_STRVAL_P(zval_p) returns nonsense if the zval contains not a string. If you use convert_to_string() before, the value is converted to a string and you can safely access it via the Z_STRVAL* macros.

There are more useful convert-functions:

Resets the zval to NULL:
  convert_to_null(zval_p)

Converts to a long by using a special base:
  convert_to_long_base(zval_p, base)

There are some more functions which may be useful, but I don't know exactly what they are doing. Just take a look at Zend/zend_operaters.h.
2002-04-06 06:56:05
http://php5.kiev.ua/manual/ru/internals2.ze1.zendapi.html
you can add functions to your object:
you may declare global
  static zend_function_entry 
    php_my_class_functions[] = {
      ZEND_FE (func1, NULL)
      ZEND_FE (func2, NULL)
      {NULL, NULL, NULL}
    };

you may declare local
  zend_class_entry my_class_entry;
  zend_class_entry *ce;

you should do something like this
  INIT_CLASS_ENTRY(
    func_class_entry, 
    "CLASSNAME",
    php_my_class_functions);
  ce = emalloc(sizeof(zend_class_entry));
  ce = zend_register_internal_class (
  &my_class_entry TSRMLS_CC);
  object_init_ex(return_value, ce);
this should produce a returned object in your php_code:
$myobj = yourfunc(/*yourparams*/);
$myobj->func1();
$myobj->func2();
2002-12-03 12:47:59
http://php5.kiev.ua/manual/ru/internals2.ze1.zendapi.html
add_property_[*](*) overwrites existing values in your object:

ex:
 var_dump($myobj);
 object(objectname)(1){
   ["_myvalue"]=>int(23);
 }
 so in func1 i "add" a property again:
 PHP_FUNCTION(func1){
   add_property_long(getThis(),"_myvalue",32);
 }
 should (as expected) result
 object(objectname)(1){
   ["_myvalue"]=>int(32);
 }
/* annotation: getThis() is a function used by many extensions to find out the $this value in an object */
2002-12-03 12:54:24
http://php5.kiev.ua/manual/ru/internals2.ze1.zendapi.html
The specified_type_or_NULL operator ! in the type specifier string of zend_parse_parameters seems to work for strings too, in addition to (a, o, O, r, and z) as noted.
2003-03-07 12:30:01
http://php5.kiev.ua/manual/ru/internals2.ze1.zendapi.html
Автор:
To built the modules shipped with the source just cd into the ext dir for example 

cd ext/oci8 

and type

export SHLIB_SUFFIX_NAME=so
phpize && aclocal && ./configure && make

now you have a subdir called "modules" with the .so file. Copy it to your extension dir and set everything up in php.ini.

This way you can add extensions to binary distributions like RPMS.
2003-03-19 13:55:40
http://php5.kiev.ua/manual/ru/internals2.ze1.zendapi.html
Автор:
Compiling Manually NOTE:
remenber add -DHAVE_CONFIG_H flag
otherwise you .so can't be ld. then you cp it to php modules directory.
i.e
Compiling cc -fpic -DHAVE_CONFIG_H  -I/usr/local/include -I. -I.. -I../Zend -c -o <your_object_file> <your_c_file>
2003-04-17 02:08:43
http://php5.kiev.ua/manual/ru/internals2.ze1.zendapi.html
Thank you very much for the comments above!

Here is a distillation of how to compile your module as a dynamic library, placing it in your web server and loading it in your test .php file being served (PHP 4.3.1).

*** Compiling a module as a .so

$ cd ext/mystuff

$ cc -fpic -DCOMPILE_DL_MYSTUFF=1 -I/usr/local/include -I../../TSRM -I../.. -I../../main -I../../Zend -I../../ext/bcmath/libbcmath/src -c -o mystuff.o mystuff.c

$ cc -shared -L/usr/local/lib -rdynamic -o mystuff.so mystuff.o

*** Move it to the web server (doc root is /www)

$ cp mystuff.so /www/.

$ chmod 644 /www/mystuff.so

*** load the module in the .php file for testing purposes

<?
dl
('/mystuff.so');

/*  your php code here  */
?>

The other thing that threw me off my tracks is that when dealing with strings you can allocate memory with emalloc and return the result with the RETURN_STRING macro (duplicate set to 0) and presumably PHP will take care of the efree -- or else I got it wrong and have plenty of leaks  ;-)
2003-04-28 01:55:10
http://php5.kiev.ua/manual/ru/internals2.ze1.zendapi.html
Using php-4.3.1 on Redhat Linux 8, step 6 did not work as written.  There is no php executable in /usr/php-4.3.1.  Instead, with help from the pear-general mailing list, I discovered that the newly built php executable is in /usr/php-4.3.1/sapi/cli.  (The very end of the output of 'make' shows -o sapi/cli/php.  According to Johannes on pear-general, it might be in sapi/cgi instead.)

So I had to change step 6 to:
6.  $ sapi/cli/php -f ext/my_module/my_module.php
2003-05-11 18:39:18
http://php5.kiev.ua/manual/ru/internals2.ze1.zendapi.html
Another caching problem:

If you seen a message saying that 'may contain buggy cache code', ensure that you delete the 'autom4k...cache' directory before running buildconf. 

A good test the see if your new module has been picked up by buildconf is:

$ grep -c my_module configure
(if that returns 0 then buildconf did not work).

Unfortunately this means that you have to completely rebuild your configure script each time you change an M4 file but it doesnt take too long.
2003-06-15 03:26:32
http://php5.kiev.ua/manual/ru/internals2.ze1.zendapi.html
Regarding the note written by jo-shi at web dot de:

I do not think that the line
  ce = emalloc(sizeof(zend_class_entry));
is required, as the line
  ce = zend_register_internal_class(&class_entry TSRMLS_CC);
actually appears to go through the process of performing the memory allocation and reference counting of the object.
2003-08-07 02:14:51
http://php5.kiev.ua/manual/ru/internals2.ze1.zendapi.html
As a completion to k at ailis dot de :

According to ARG_SHOULD_BE_SENT_BY_REF macro in zend_compile.h, BYREF_FORCE_REST force the rest of the arguments to be passed as ref.

The first byte have to be the index of BYREF_FORCE_REST in the array.

Means, if you have, 5 args, the first two ones are NOT passed as ref, and the 3 others are, you can do :

static unsigned char rest_arguments_force_ref[] = { 3, BYREF_NONE, BYREF_NONE, BYREF_FORCE_REST };

We can see a few things in this example :

  * As k at ailis dot de said, the first byte is _NOT_ the number of args passed to the function.
  * The argument corresponding to BYREF_FORCE_REST MUST be passed as a reference
  * The others arguments MUST be passed as a reference
2004-03-24 16:44:09
http://php5.kiev.ua/manual/ru/internals2.ze1.zendapi.html
Just a note of caution, when using a string value within zend_parse_parameters() you MUST specify the length parameter also, or php may segfault on some machines.

Example possible segfault code:

char *s;
zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "s", &s)

Correct code:

char *s;
int s_len;
zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "s", &s, &s_len)
2004-03-31 08:18:35
http://php5.kiev.ua/manual/ru/internals2.ze1.zendapi.html
All associate array functions (add_assoc_long for example) are now just aliases of their extended version (add_assoc_long_ex). 

The key lenght is calculated with strlen(key) + 1, but remember that this is NOT binary safe (strlen stops on the first null byte).

Users may want to use binary keys, so always prefer extended versions with a secure length !
2004-04-05 18:28:16
http://php5.kiev.ua/manual/ru/internals2.ze1.zendapi.html
Just an example of the way of the way of returning array :

/*
** Creates a array of on element (a long of value 42)
*/
ZEND_FUNCTION("make_42_array")
{
  zval *my_long;

  // Declaring and allocating return_value to be an array
  array_init(return_value);

  //Creates and assign the long element at (long)42
  MAKE_STD_ZVAL(my_long);
  ZVAL_LONG(new_element, 42);

  //Make this our $array[0] I do not use add_index_long to
  //to show a "by-hand" assignation
  zend_hash_index_update(HASH_OF(return_value), 0, (void *)&my_long, sizeof(zval *), NULL);

  //Returns nothing to satisfy the void prototype
  return ;

}
2004-04-07 17:44:31
http://php5.kiev.ua/manual/ru/internals2.ze1.zendapi.html
Remember that even if RETURN_* macros sets the return_value to return variable to user, they also RETURN FROM YOU CODE by a "return ;", any code after these macro will be ignored.

If you want to place code after a return of variable (which is not a good idea for code readability), you'll have to use RETVAL_* macro instead.
2004-04-07 17:51:25
http://php5.kiev.ua/manual/ru/internals2.ze1.zendapi.html
phpmanual at oderwat dot de is incorrect:

TSRMLS_DC and TSRMLS_CC are both correct as listed in the original text. 

TSRMLS_DC is used for Zend internal function declarations and TSRMLS_CC must be used when calling such functions.
2004-04-24 03:36:28
http://php5.kiev.ua/manual/ru/internals2.ze1.zendapi.html
Автор:
If you want to free zval, you can do this:

{
zval *new_var;

/* allocate and initialize new container */
MAKE_STD_ZVAL(new_var);

/* set type and variable contents here, see the following sections */

ZVAL_STRING(new_var, "123456", 1);

/* introduce this variable by the name "new_variable_name" into the symbol table */
zend_hash_update(
    EG(active_symbol_table),
    "new_var",
    strlen("new_var") + 1,
    &new_var,
    sizeof(zval *),
    NULL
);

zend_hash_del(
    EG(active_symbol_table),
    "new_var",
    strlen("new_var") + 1);

FREE_ZVAL(new_var);
}
2004-04-26 01:13:08
http://php5.kiev.ua/manual/ru/internals2.ze1.zendapi.html
Автор:
When following the directions for compiling via make, it may be necessary to delete the configure script before running buildconf.  Otherwise you may get a complaint about buggy cache code and the configure script won't actually be updated.
2004-05-02 01:55:02
http://php5.kiev.ua/manual/ru/internals2.ze1.zendapi.html
In fact, empty string is not writeable, even when we add an slash after the type decl. Say the implementation of my_test() is like this:

char *s;
int s_len;
zend_parse_parameters(ZEND_NUM_ARGS() TSRMLS_CC, "s/", &s, &s_len) 

and you pass an empty string my_test("") from the PHP script, then s[0] is not writeable. You will get a seg fault. The reason is that Zend doesn't emalloc a new copy of the empty string dynamically, instead it just assigns the empty_string (which is defined at compile time and located in unwriteable data seg) pointer to s.
2004-07-19 20:40:05
http://php5.kiev.ua/manual/ru/internals2.ze1.zendapi.html
Quick note to save time to beginners

To make the example above work, I had to add -I../TSRM because the file tsrm_virtual_cwd.h couldn't be found otherwise (it's located in the TSRM directory which is not included above)

In my case (pure Debian Woody install), php libraries were located in /usr/include/php4 (and php.h was in the 'main' subdirectory) so I had to use this path instead of /usr/local/include
2004-10-25 07:19:50
http://php5.kiev.ua/manual/ru/internals2.ze1.zendapi.html
to build with lcc-win32 compiler:

change #include "php.h" to #include "php-lcc.h"
this is php-lcc.h (copied from excellent windbinder project by Rubem Pechansky)

//ZEND constants
#if defined(_MSC_VER)        // Rick
#    if defined(ZEND_EXPORTS)
#        undef ZEND_EXPORTS
#    endif
#    undef ZEND_DEBUG
#else
#    define PHP_WIN32
#    define ZEND_WIN32
#endif

#define ZEND_DEBUG    FALSE    // Must be FALSE
#define ZTS                    // Must define ZTS (Zend Thread Safety)
#define PHP_REGEX_H            // Skip php_regex.h: '_off_t' not defined anywhere
#define COMPILE_DL_FIRST_MODULE 1
//----------------------------------------------------------------- DEPENDENCIES

#include <php.h>

//---------------------------------------------------------- AUXILIARY FUNCTIONS

int parse_array(zval *array, const char *fmt, ...);

//------------------------------------------------------------------ END OF FILE

you must also used tweaked headers file from winbinder author at this link: http://hypervisual.com/winbinder/files/archived/php4_tweaked_headers.zip
(php 4).
I used php 4.3.10 and all worked fine
2005-04-07 01:34:04
http://php5.kiev.ua/manual/ru/internals2.ze1.zendapi.html
Автор:
I installed and run 4.1.1 on RH 7.1  It runs on a separate Apache Server than the one furnished by Red Hat.

A few adminisrative changes were necessary to get  the function going.

The main one was finding and modifying php.ini.

The command: find . -print | grep php.ini should do that.
Mine was in /usr/local/lib 

Look for extension_dir in php.ini then type the directive as

extension_dir=/usr/lib/php4 

Use no trailing / in the directive. This is where the dl('firstmod.so') php statement accesses your module. 

Tip: I do not use a leading / like dl('/firstmod.so') which will be misparsed.  {Note by Ed a PHP ...}

The source module is named firstmod.c.

I compiled and created the firstmod.so with a script based on the various notes about the compile parameters. See
markjolesen, ywarnier, 17-Apr, wish I .
2005-06-13 08:29:50
http://php5.kiev.ua/manual/ru/internals2.ze1.zendapi.html
A small amount of administration is needed to make this work.

Mainly the dl command does not pick up the module created.

To remedy, use a full path for the extension_dir parameter in php.ini. Then create that subdirectory mod 755 vis:

        extension_dir=/usr/lib/php411

And create php411. The name is arbitrary.

In the php dl command, specify dl('firstmod.so'); do not use any slashes.
2005-06-14 08:18:06
http://php5.kiev.ua/manual/ru/internals2.ze1.zendapi.html
Here is a quick example of how to read arrays passed as parameters:

int i;
/* data will be used to store one element on each iteration of a loop */
zval **data = NULL;
/* data_array is the array we are copying values into */
char **data_array = NULL;

/* Use zend_parse_parameters as you normally would with an 'a' in the type 
   string.
   In this example it sets the variables data_arg and array_length 
*/

data_array = emalloc(sizeof(char *) * array_length);

for (i = 0; i < array_length; i++) {
  /* Get an element out of the hash table as a zval */
  zend_hash_index_find(Z_ARRVAL_P(data_arg), i, (void **)&data);

  /* Make sure the zval is a string */
  convert_to_string(*data);

  /* Convert the zval into a string and store it */
  data_array[i] = Z_STRVAL_PP(data);
}
2005-07-01 06:26:22
http://php5.kiev.ua/manual/ru/internals2.ze1.zendapi.html
It looks like PHP 5 uses a newer version of the windows socket library.

If your extension links to a library that uses the old version you might get a lot of errors about redefining things.

To fix this problem make sure the PHP header files are included before the librarys header files.
2005-07-29 04:58:57
http://php5.kiev.ua/manual/ru/internals2.ze1.zendapi.html
These macros are defined in a separate header file called php_ini.h.
2005-08-20 11:15:48
http://php5.kiev.ua/manual/ru/internals2.ze1.zendapi.html
Notes for Windows PHP5 extension developers:

First, two great articles at http://www.zend.com/php/internals/index.php are in the must read category. Unfortunately an article on building extensions on Windows is yet to arrive at this time. So one gets stuck at section 'Building Your Extension' in the first article - because there is no 'phpize' for Windows to the best of my knowledge.

First point of curiosity is how the extensions that are available for Windows appear in the output of "cscript /nologo configure.js --help". Turns out the magic happens by executing "buildconf.bat". To cut a long story short, it turns out that for Windows, the build system looks for config.w32 in each extension directory instead of config.m4; config.w32 is actually a javascript (from what I gather reading the "vim:ft=javascript" comment at the top of the files).

To get going with the "hello world" sample in the article mentioned above here is the config.w32 to replace config.m4;

--- begin file: config.w32 ---
// hello world module configuration
// vim:ft=javascript
ARG_ENABLE("hello", "hello Enable Hello World support", "no");

if (PHP_HELLO == "yes") {
  EXTENSION("hello", "hello.c", null, "-Iext/hello");
  AC_DEFINE('HAVE_HELLO', 1, 'Whether you ave Hello World');
}

--- end file: config.w32 ---

And just to compare, here is the config.m4

--- begin file: config.m4 ---
dnl vim:ft=m4
dnl hello world module configuration
PHP_ARG_ENABLE(hello, whether to enable Hellow World support,
[ --enable-hello  Enable Hello World support])

if test "$PHP_HELLO" = "yes"; then
  AC_DEFINE(HAVE_HELLO, 1 [Whether you have Hello World])
  PHP_NEW_EXTENSION(hello, hello.c, $ext_shared)
fi

--- end file: config.m4 ---

And finally the key step is to execute 'buildconf.bat'; after this step:

  cscript /nologo configure.js | find "hello"

should show something like:
"--enable-hello     hello Enable Hello World support"
2005-09-17 03:53:33
http://php5.kiev.ua/manual/ru/internals2.ze1.zendapi.html
A very nice resource http://devzone.zend.com/public/view/tag/Extension
2007-03-10 03:41:02
http://php5.kiev.ua/manual/ru/internals2.ze1.zendapi.html

    Поддержать сайт на родительском проекте КГБ