Функции регулярных выражений POSIX
Смотрите также
Для регулярных выражений с Perl-совместимым синтаксисом смотрите функции PCRE. Простое сравнение с шаблоном подстановок командной оболочки обеспечивается функцией fnmatch().
Содержание
- ereg_replace — Осуществляет замену по регулярному выражению
- ereg — Совпадение с регулярным выражением
- eregi_replace — Осуществляет замену по регулярному выражению без учета регистра
- eregi — Совпадение с регулярным выражением без учёта регистра
- split — Разбиение строки на массив по регулярному выражению
- spliti — Разбивает строку в массив с помощью регулярного выражения без учета регистра
- sql_regcase — Создает регулярное выражение для регистронезависимого сравнения
Коментарии
if you are looking for the abbreviations like tab, carriage return, regex-class definitions
you should look here:
http://elvin.dstc.edu.au/doc/regex.html
some excerpts:
\a control characters bell
\b backspace
\f form feed
\n line feed
\r carriage return
\t horizontal tab
\v vertical tab
class example
\cLu all uppercase letters
It's easy to exclude characters but excluding words with a regular expression is a bit more tricky. For parentheses there is no equivalent to the ^ for brackets. The only way I've found to exclude a string is to proceed by inverse logic: accept all the words that do NOT correspond to the string. So if you want to accept all strings except those _begining_ with "abc", you'd have to accept any string that matches one of the following:
^(ab[^c])
^(a[^b]c)
^(a[^b][^c])
^([^a]bc)
^([^a]b[^c])
^([^a][^b]c)
^([^a][^b][^c])
which, put together, gives the regex
^(ab[^c]|a[^b]c|a[^b][^c]|[^a]bc|[^a]b[^c]|[^a][^b]c|[^a][^b][^c])
Note that this won't work to detect the word "abc" anywhere in a string. You need to have some way of anchoring the inverse word match
like: ^(a[^b]|[^a]b|[^a][^b]) ;"ab" not at begining of line
or: (a[^b]|[^a]b|[^a][^b])& ;"ab" not at end of line
or: 123(a[^b]|[^a]b|[^a][^b]) ;"ab" not after "123"
I don't know why "(abc){0,0}" is an invalid synthax. It would've made all this much simpler.
Slightly off-topic, here's a regex date validator (format yyyy-mm-dd, remove all spaces and linefeeds):
^(19|20)([0-9]{2}-((0[13-9]|1[0-2])-(0[1-9]|[12][0-9]|30)|
(0[13578]|1[02])-31|02-(0[1-9]|1[0-9]|2[0-8]))|([2468]0|
[02468][48]|[13579][26])-02-29)$
mholdgate wrote a very nice quick reference guide in the next page (function.ereg), but I felt it could be improved a little:
________________
^ Start of line
$ End of line
n? Zero or only one single occurrence of character 'n'
n* Zero or more occurrences of character 'n'
n+ At least one or more occurrences of character 'n'
n{2} Exactly two occurrences of 'n'
n{2,} At least 2 or more occurrences of 'n'
n{2,4} From 2 to 4 occurrences of 'n'
. Any single character
() Parenthesis to group expressions
(.*) Zero or more occurrences of any single character, ie, anything!
(n|a) Either 'n' or 'a'
[1-6] Any single digit in the range between 1 and 6
[c-h] Any single lower case letter in the range between c and h
[D-M] Any single upper case letter in the range between D and M
[^a-z] Any single character EXCEPT any lower case letter between a and z.
Pitfall: the ^ symbol only acts as an EXCEPT rule if it is the
very first character inside a range, and it denies the
entire range including the ^ symbol itself if it appears again
later in the range. Also remember that if it is the first
character in the entire expression, it means "start of line".
In any other place, it is always treated as a regular ^ symbol.
In other words, you cannot deny a word with ^undesired_word
or a group with ^(undesired_phrase).
Read more detailed regex documentation to find out what is
necessary to achieve this.
[_4^a-zA-Z] Any single character which can be the underscore or the
number 4 or the ^ symbol or any letter, lower or upper case
?, +, * and the {} count parameters can be appended not only to a single character, but also to a group() or a range[].
therefore,
^.{2}[a-z]{1,2}_?[0-9]*([1-6]|[a-f])[^1-9]{2}a+$
would mean:
^.{2} = A line beginning with any two characters,
[a-z]{1,2} = followed by either 1 or 2 lower case letters,
_? = followed by an optional underscore,
[0-9]* = followed by zero or more digits,
([1-6]|[a-f]) = followed by either a digit between 1 and 6 OR a
lower case letter between a and f,
[^1-9]{2} = followed by any two characters except digits
between 1 and 9 (0 is possible),
a+$ = followed by at least one or more
occurrences of 'a' at the end of a line.
sorry to be picky here but saying ^ is beginning of a line or $ is end of line is rather misleading, if you're working on a daily basis with regexes.
it might be that it is most of the time correct BUT in some occasions you'd be better off to think of ^ as "start of string" and $ as "end of string".
there are ways to make your regex engine forget about your system's notion of a newline, it's what is commonly refered to as multiline regexes...
Follow-up to my previous post:
Some simple optimization allowed me to realize that excluding a word at the beginning of a string has a degree of complexity O(n) rather than O(n^2). I only had to follow the logic:
if str[0] != badword[0] then OK
else
if str[1] != badword[1] then OK
else
if str[2] != badword[2] then OK
else ...
So excluding the word 'abc' at the beginning of a string is much more simple than I had made it out to be:
^([^a]|a[^b]|ab[^c])
Sadly, the Posix regexp evaluator (PHP 4.1.2) does not seem to support multi-character coallating sequences, even though such sequences are included in the man-page documentation.
Specifically, the man-page discusses the expression "[[.ch.]]*c" which matches the first five characters of "chchcc". Running this expression in ereg_replace generates the error "Warning: REG_ECOLLATE". (Running an equivalent expression with only one character between the periods does work, however.)
Multi-character coallating sequences are not supported!
This is really, really too bad, because it would have provided a simple way to exlude words from the target.
I'm going to go learn PCRE, now. :-(
Something that really got me: I'm used to using Perl's regexps, and so I used \s to check for a whitespace character in a password on a website. My PHP book (Wrox Press, Professional PHP Programming) agreed with me that this is exactly the same as [ \r\n\t\f\v], but it's NOT. In fact, what it did was keep anyone from joining the site if they put an 's' in their password! So beware, check for subtle differences between what you're used to and PHP.
[[:space:]] works fine, by the way.
I'm going to use the pcre functions from now on... I like Perl :o)
I have also experienced the same problem as bps7j@yahoo.com had been experiencing, except I did not recognize the problem until after many hours of debugging.
"\s" does not seem to represent spaces, however "[[:space:]]" does.
Another problem I was having was matching dashes/hyphens '-'. You must escape them "\-" and place them at the end of a bracket expression.
Example: To match a blank string or a string containing only uppercase letters, underscores, spaces, and hyphens:
^([A-Z_\-]|[[:space:]])*$
Hope this saves someone some time from debugging like I was. :)
Ever wondered how to exclude "[" and "]"?Here it goes: "[^][]". Extra characters to exclude can beadded right in the middle like this: "[^]fobar[]".
I tested how fast POSIX and Perl regular expresions are, and here are the results:
| POSIX Extended | Perl-Compatible | POSIX - Perl
-----------+-----------------+-----------------+-----------------
match | 0.1296420097 | 0.1006720066 | 0.0289700031
match i | 0.1204010248 | 0.1101620197 | 0.0102390051
replace | 0.1896649599 | 0.1298999786 | 0.0597649813
replace i | 10.6998120546 | 0.1453789473 | 10.5544331074
So, as you can see, preg_* functions are faster then ereg* functions. You can find source code of my test script here: http://mina86.home.staszic.waw.pl/temp/regexp-speed-test.txt
Tip !
Metacharacters in regular expresions are usefull and easy to use.
The following is a set of special values that denote certain common ranges. They have the advantage that also take in account the 'locale' i.e. any variant of the local language/coding system.
[:digit:] Only the digits 0 to 9
[:alnum:] Any alphanumeric character 0 to 9 OR A to Z or a to z.
[:alpha:] Any alpha character A to Z or a to z.
[:blank:] Space and TAB characters only.
[:xdigit:] .
[:punct:] Punctuation symbols . , " ' ? ! ; :
[:print:] Any printable character.
[:space:] Any space characters.
[:graph:] .
[:upper:] Any alpha character A to Z.
[:lower:] Any alpha character a to z.
[:cntrl:] .
Another nice tutorial about regular expressions: http://www.mkssoftware.com/docs/man5/regexp.5.aspI was having a ton of issues with other people's phone number validation expressions, so I made my own. It works with most US phone numbers, including those with extentions. Format matches any of the following formats:
5551234567
555 1234567
555 123 4567
555 123-4567
555-1234567
555-123-4567
555123-4567
(555)1234567
(555)123 4567
(555)123-4567
(555) 1234567
(555) 123-4567
(555) 123 4567
And any of the following extentions can be added with or without a space between them and the number:
x123
x.123
x. 123
x 123
ext.123
ext. 123
ext 123
ext123
Extentions support between 1 and 5 digits.
Here is the expression:
$regex = '^[(]?[2-9]{1}[0-9]{2}[) -]{0,2}' . '[0-9]{3}[- ]?' . '[0-9]{4}[ ]?' . '((x|ext)[.]?[ ]?[0-9]{1,5})?$';
Enjoy!
Hey trucex. Cool phone number function but your $regex produces the following error. Warning: No ending delimiter '^' found
Instead of:
$regex = '^[(]?[2-9]{1}[0-9]{2}[) -]{0,2}' . '[0-9]{3}[- ]?' . '[0-9]{4}[ ]?' . '((x|ext)[.]?[ ]?[0-9]{1,5})?$';
It think should be:
$regex = '^[(]?[2-9]{1}[0-9]{2}[) -]{0,2}' . '[0-9]{3}[- ]?' . '[0-9]{4}[ ]?' . '((x|ext)[.]?[ ]?[0-9]{1,5})?$^';
His regular expression is correct, the ^ is to check for the beginning of the string. It is just looking for delimiter characters, try putting slashes around it."/<regex>/"
A minor tweak to trucex' phone validator, because some people use a dot separator between the area code, exchange and four-digit block.
Posted here for your copy-and-paste convenience.
$regex = '^[(]?[2-9]{1}[0-9]{2}[) -.]{0,2}' . '[0-9]{3}[- .]?' . '[0-9]{4}[ ]?' . '((x|ext)[.]?[ ]?[0-9]{1,5})?$';
I am using a regex with the same thought process in mind as the earlier phone number. However, I have also implemented it to allow the '1' so a number like.
1 222 222 2222 would still be valid as well (along with all of the other combinations.
In my regex, I pull out the matches - not the exact string. So if someone were to forget a bracket, it wouldnt matter to the actual output as it is stripped from that match.
So, if you put in 222) 233 3454, the matches would only pull out 1=>222, 2=>233, 3=>3454
This has been very helpful in tweaking my regex.
Thanks,
Nate
The fact that 'regex' functions are not binary safe have some very important security implications for people who are using ereg to validate their input data.
Suppose I have an expression:
<?php
$pattern = '^[[:alnum:]]*$';
?>
This should match any number of alphanumeric characters, right? Well, if the string you're matching is not binary, sure. However, say we have a null-byte tossed in the string:
<?php
$string = chr(0) . "<script>alert('xss')</script>";
echo ereg($pattern, $string);
?>
Will return true. Note that it is trivially easy to inject null bytes into PHP parameters:
index.php?content=%00ASCII
Scary. So unless you really know what you're doing, just use the PCRE preg_* functions.
So i did like to get Ü Å Ä Ö and some more in to my check for things.
<?php
$chars = array('À', 'Á', 'Â', 'Ã', 'Ä', 'Å', 'Æ', 'Ç', 'È', 'É', 'Ê', 'Ë', 'Ì', 'Í', 'Î', 'Ï', 'Ñ', 'Ò', 'Ó', 'Ô', 'Õ', 'Ö', 'Ø', 'Ù', 'Ú', 'Û', 'Ü', 'Ý', 'Þ', 'ß', 'à', 'á', 'â', 'ã', 'ä', 'å', 'æ', 'ç', 'è', 'é', 'ê', 'ë', 'ì', 'í', 'î', 'ï', 'ð', 'ñ', 'ò', 'ó', 'ô', 'õ', 'ö', 'ø', 'ù', 'ú', 'û', 'ý', 'ý', 'þ', 'ÿ');
$list = array();
foreach($chars AS $char ) {
$list[dechex(ord($char))] = $char;
}
ksort($list);
foreach ($list as $key => $val) {
echo "$key = $val, ";
}
?>
that gave me this
c0 = À, c1 = Á, c2 = Â, c3 = Ã, c4 = Ä, c5 = Å, c6 = Æ, c7 = Ç, c8 = È, c9 = É, ca = Ê, cb = Ë, cc = Ì, cd = Í, ce = Î, cf = Ï, d1 = Ñ, d2 = Ò, d3 = Ó, d4 = Ô, d5 = Õ, d6 = Ö, d8 = Ø, d9 = Ù, da = Ú, db = Û, dc = Ü, dd = Ý, de = Þ, df = ß, e0 = à, e1 = á, e2 = â, e3 = ã, e4 = ä, e5 = å, e6 = æ, e7 = ç, e8 = è, e9 = é, ea = ê, eb = ë, ec = ì, ed = í, ee = î, ef = ï, f0 = ð, f1 = ñ, f2 = ò, f3 = ó, f4 = ô, f5 = õ, f6 = ö, f8 = ø, f9 = ù, fa = ú, fb = û, fd = ý, fe = þ, ff = ÿ
and that is if you make it smaller...
\\xC0-\\xD6 \\xD8-\\xF6 \\xF8-\\xFB \\xFD-\\xFF
Hope this help some one with Ü Å Ä Ö