Apache HTTP Сервер Версия 2.0
Apache Core Features
Описание: | Core Apache HTTP Server features that are always available |
---|---|
Статус: | Core |
Директивы
- AcceptPathInfo
- AccessFileName
- AddDefaultCharset
- AddOutputFilterByType
- AllowEncodedSlashes
- AllowOverride
- AuthName
- AuthType
- CGIMapExtension
- ContentDigest
- DefaultType
- <Directory>
- <DirectoryMatch>
- DocumentRoot
- EnableMMAP
- EnableSendfile
- ErrorDocument
- ErrorLog
- FileETag
- <Files>
- <FilesMatch>
- ForceType
- HostnameLookups
- IdentityCheck
- <IfDefine>
- <IfModule>
- Include
- KeepAlive
- KeepAliveTimeout
- <Limit>
- <LimitExcept>
- LimitInternalRecursion
- LimitRequestBody
- LimitRequestFields
- LimitRequestFieldSize
- LimitRequestLine
- LimitXMLRequestBody
- <Location>
- <LocationMatch>
- LogLevel
- MaxKeepAliveRequests
- NameVirtualHost
- Options
- Require
- RLimitCPU
- RLimitMEM
- RLimitNPROC
- Satisfy
- ScriptInterpreterSource
- ServerAdmin
- ServerAlias
- ServerName
- ServerPath
- ServerRoot
- ServerSignature
- ServerTokens
- SetHandler
- SetInputFilter
- SetOutputFilter
- TimeOut
- TraceEnable
- UseCanonicalName
- <VirtualHost>
AcceptPathInfo Директива
Описание: | Resources accept trailing pathname information |
---|---|
Синтаксис: | AcceptPathInfo On|Off|Default |
По умолчанию: | AcceptPathInfo Default |
Контекст: | server config, virtual host, directory, .htaccess |
Перекрывает: | FileInfo |
Статус: | Core |
Модуль: | core |
Совместимость: | Available in Apache 2.0.30 and later |
This directive controls whether requests that contain trailing
pathname information that follows an actual filename (or
non-existent file in an existing directory) will be accepted or
rejected. The trailing pathname information can be made
available to scripts in the PATH_INFO
environment
variable.
For example, assume the location /test/
points to
a directory that contains only the single file
here.html
. Then requests for
/test/here.html/more
and
/test/nothere.html/more
both collect
/more
as PATH_INFO
.
The three possible arguments for the
AcceptPathInfo
directive are:
Off
- A request will only be accepted if it
maps to a literal path that exists. Therefore a request with
trailing pathname information after the true filename such as
/test/here.html/more
in the above example will return a 404 NOT FOUND error. On
- A request will be accepted if a
leading path component maps to a file that exists. The above
example
/test/here.html/more
will be accepted if/test/here.html
maps to a valid file. Default
- The treatment of requests with
trailing pathname information is determined by the handler responsible for the request.
The core handler for normal files defaults to rejecting
PATH_INFO
requests. Handlers that serve scripts, such as cgi-script and isapi-handler, generally acceptPATH_INFO
by default.
The primary purpose of the AcceptPathInfo
directive is to allow you to override the handler's choice of
accepting or rejecting PATH_INFO
. This override is required,
for example, when you use a filter, such
as INCLUDES, to generate content
based on PATH_INFO
. The core handler would usually reject
the request, so you can use the following configuration to enable
such a script:
<Files "mypaths.shtml">
Options +Includes
SetOutputFilter INCLUDES
AcceptPathInfo On
</Files>
AccessFileName Директива
Описание: | Name of the distributed configuration file |
---|---|
Синтаксис: | AccessFileName filename [filename] ... |
По умолчанию: | AccessFileName .htaccess |
Контекст: | server config, virtual host |
Статус: | Core |
Модуль: | core |
While processing a request the server looks for the first existing configuration file from this list of names in every directory of the path to the document, if distributed configuration files are enabled for that directory. For example:
AccessFileName .acl
before returning the document
/usr/local/web/index.html
, the server will read
/.acl
, /usr/.acl
,
/usr/local/.acl
and /usr/local/web/.acl
for directives, unless they have been disabled with
<Directory />
AllowOverride None
</Directory>
См также
AddDefaultCharset Директива
Описание: | Default charset parameter to be added when a response
content-type is text/plain or text/html |
---|---|
Синтаксис: | AddDefaultCharset On|Off|charset |
По умолчанию: | AddDefaultCharset Off |
Контекст: | server config, virtual host, directory, .htaccess |
Перекрывает: | FileInfo |
Статус: | Core |
Модуль: | core |
This directive specifies a default value for the media type
charset parameter (the name of a character encoding) to be added
to a response if and only if the response's content-type is either
text/plain
or text/html
. This should override
any charset specified in the body of the response via a META
element, though the exact behavior is often dependent on the user's client
configuration. A setting of AddDefaultCharset Off
disables this functionality. AddDefaultCharset On
enables
a default charset of iso-8859-1
. Any other value is assumed
to be the charset to be used, which should be one of the
AddDefaultCharset utf-8
AddDefaultCharset
should only be used when all
of the text resources to which it applies are known to be in that
character encoding and it is too inconvenient to label their charset
individually. One such example is to add the charset parameter
to resources containing generated content, such as legacy CGI
scripts, that might be vulnerable to cross-site scripting attacks
due to user-provided data being included in the output. Note, however,
that a better solution is to just fix (or delete) those scripts, since
setting a default charset does not protect users that have enabled
the "auto-detect character encoding" feature on their browser.
См также
AddOutputFilterByType Директива
Описание: | assigns an output filter to a particular MIME-type |
---|---|
Синтаксис: | AddOutputFilterByType filter[;filter...]
MIME-type [MIME-type] ... |
Контекст: | server config, virtual host, directory, .htaccess |
Перекрывает: | FileInfo |
Статус: | Core |
Модуль: | core |
Совместимость: | Available in Apache 2.0.33 and later |
This directive activates a particular output filter for a request depending on the response MIME-type.
The following example uses the DEFLATE
filter, which
is provided by mod_deflate
. It will compress all
output (either static or dynamic) which is labeled as
text/html
or text/plain
before it is sent
to the client.
AddOutputFilterByType DEFLATE text/html text/plain
If you want the content to be processed by more than one filter, their
names have to be separated by semicolons. It's also possible to use one
AddOutputFilterByType
directive for each of
these filters.
The configuration below causes all script output labeled as
text/html
to be processed at first by the
INCLUDES
filter and then by the DEFLATE
filter.
<Location /cgi-bin/>
Options Includes
AddOutputFilterByType INCLUDES;DEFLATE text/html
</Location>
Примечание
Enabling filters with AddOutputFilterByType
may fail partially or completely in some cases. For example, no
filters are applied if the MIME-type could not be determined and falls
back to the DefaultType
setting,
even if the DefaultType
is the
same.
However, if you want to make sure, that the filters will be
applied, assign the content type to a resource explicitly, for
example with AddType
or
ForceType
. Setting the
content type within a (non-nph) CGI script is also safe.
The by-type output filters are never applied on proxy requests.
См также
AllowEncodedSlashes Директива
Описание: | Determines whether encoded path separators in URLs are allowed to be passed through |
---|---|
Синтаксис: | AllowEncodedSlashes On|Off |
По умолчанию: | AllowEncodedSlashes Off |
Контекст: | server config, virtual host |
Статус: | Core |
Модуль: | core |
Совместимость: | Available in Apache 2.0.46 and later |
The AllowEncodedSlashes
directive allows URLs
which contain encoded path separators (%2F
for /
and additionally %5C
for \
on according systems)
to be used. Normally such URLs are refused with a 404 (Not found) error.
Turning AllowEncodedSlashes
On
is
mostly useful when used in conjunction with PATH_INFO
.
Примечание
Allowing encoded slashes does not imply decoding.
Occurrences of %2F
or %5C
(only on
according systems) will be left as such in the otherwise decoded URL
string.
См также
AllowOverride Директива
Описание: | Types of directives that are allowed in
.htaccess files |
---|---|
Синтаксис: | AllowOverride All|None|directive-type
[directive-type] ... |
По умолчанию: | AllowOverride All |
Контекст: | directory |
Статус: | Core |
Модуль: | core |
When the server finds an .htaccess
file (as
specified by AccessFileName
)
it needs to know which directives declared in that file can override
earlier configuration directives.
Only available in <Directory> sections
AllowOverride
is valid only in
<Directory>
sections specified without regular expressions, not in <Location>
, <DirectoryMatch>
or
<Files>
sections.
When this directive is set to None
, then
.htaccess files are completely ignored.
In this case, the server will not even attempt to read
.htaccess
files in the filesystem.
When this directive is set to All
, then any
directive which has the .htaccess Context is allowed in
.htaccess
files.
The directive-type can be one of the following groupings of directives.
- AuthConfig
-
Allow use of the authorization directives (
AuthDBMGroupFile
,AuthDBMUserFile
,AuthGroupFile
,AuthName
,AuthType
,AuthUserFile
,Require
, etc.). - FileInfo
-
Allow use of the directives controlling document types (
DefaultType
,ErrorDocument
,ForceType
,LanguagePriority
,SetHandler
,SetInputFilter
,SetOutputFilter
, andmod_mime
Add* and Remove* directives, etc.). - Indexes
-
Allow use of the directives controlling directory indexing
(
AddDescription
,AddIcon
,AddIconByEncoding
,AddIconByType
,DefaultIcon
,DirectoryIndex
,FancyIndexing
,HeaderName
,IndexIgnore
,IndexOptions
,ReadmeName
, etc.). - Limit
-
Allow use of the directives controlling host access (
Allow
,Deny
andOrder
). - Options
-
Allow use of the directives controlling specific directory
features (
Options
andXBitHack
).
Пример:
AllowOverride AuthConfig Indexes
In the example above all directives that are neither in the group
AuthConfig
nor Indexes
cause an internal
server error.
См также
AuthName Директива
Описание: | Authorization realm for use in HTTP authentication |
---|---|
Синтаксис: | AuthName auth-domain |
Контекст: | directory, .htaccess |
Перекрывает: | AuthConfig |
Статус: | Core |
Модуль: | core |
This directive sets the name of the authorization realm for a
directory. This realm is given to the client so that the user
knows which username and password to send.
AuthName
takes a single argument; if the
realm name contains spaces, it must be enclosed in quotation
marks. It must be accompanied by AuthType
and Require
directives, and directives such
as AuthUserFile
and
AuthGroupFile
to
work.
For example:
AuthName "Top Secret"
The string provided for the AuthName
is what will
appear in the password dialog provided by most browsers.
См также
AuthType Директива
Описание: | Type of user authentication |
---|---|
Синтаксис: | AuthType Basic|Digest |
Контекст: | directory, .htaccess |
Перекрывает: | AuthConfig |
Статус: | Core |
Модуль: | core |
This directive selects the type of user authentication for a
directory. Only Basic
and Digest
are
currently implemented.
It must be accompanied by AuthName
and Require
directives, and directives such
as AuthUserFile
and
AuthGroupFile
to
work.
См также
CGIMapExtension Директива
Описание: | Technique for locating the interpreter for CGI scripts |
---|---|
Синтаксис: | CGIMapExtension cgi-path .extension |
Контекст: | directory, .htaccess |
Перекрывает: | FileInfo |
Статус: | Core |
Модуль: | core |
Совместимость: | NetWare only |
This directive is used to control how Apache finds the
interpreter used to run CGI scripts. For example, setting
CGIMapExtension sys:\foo.nlm .foo
will
cause all CGI script files with a .foo
extension to
be passed to the FOO interpreter.
ContentDigest Директива
Описание: | Enables the generation of Content-MD5 HTTP Response
headers |
---|---|
Синтаксис: | ContentDigest On|Off |
По умолчанию: | ContentDigest Off |
Контекст: | server config, virtual host, directory, .htaccess |
Перекрывает: | Options |
Статус: | Core |
Модуль: | core |
This directive enables the generation of
Content-MD5
headers as defined in RFC1864
respectively RFC2068.
MD5 is an algorithm for computing a "message digest" (sometimes called "fingerprint") of arbitrary-length data, with a high degree of confidence that any alterations in the data will be reflected in alterations in the message digest.
The Content-MD5
header provides an end-to-end
message integrity check (MIC) of the entity-body. A proxy or
client may check this header for detecting accidental
modification of the entity-body in transit. Example header:
Content-MD5: AuLb7Dp1rqtRtxz2m9kRpA==
Note that this can cause performance problems on your server since the message digest is computed on every request (the values are not cached).
Content-MD5
is only sent for documents served
by the core
, and not by any module. For example,
SSI documents, output from CGI scripts, and byte range responses
do not have this header.
DefaultType Директива
Описание: | MIME content-type that will be sent if the server cannot determine a type in any other way |
---|---|
Синтаксис: | DefaultType MIME-type |
По умолчанию: | DefaultType text/plain |
Контекст: | server config, virtual host, directory, .htaccess |
Перекрывает: | FileInfo |
Статус: | Core |
Модуль: | core |
There will be times when the server is asked to provide a document whose type cannot be determined by its MIME types mappings.
The server must inform the client of the content-type of the
document, so in the event of an unknown type it uses the
DefaultType
. For example:
DefaultType image/gif
would be appropriate for a directory which contained many GIF
images with filenames missing the .gif
extension.
Note that unlike ForceType
, this directive only
provides the default mime-type. All other mime-type definitions,
including filename extensions, that might identify the media type
will override this default.
<Directory> Директива
Описание: | Enclose a group of directives that apply only to the named file-system directory and sub-directories |
---|---|
Синтаксис: | <Directory directory-path>
... </Directory> |
Контекст: | server config, virtual host |
Статус: | Core |
Модуль: | core |
<Directory>
and
</Directory>
are used to enclose a group of
directives that will apply only to the named directory and
sub-directories of that directory. Any directive that is allowed
in a directory context may be used. Directory-path is
either the full path to a directory, or a wild-card string using
Unix shell-style matching. In a wild-card string, ?
matches
any single character, and *
matches any sequences of
characters. You may also use []
character ranges. None
of the wildcards match a `/' character, so <Directory
/*/public_html>
will not match
/home/user/public_html
, but <Directory
/home/*/public_html>
will match. Example:
<Directory /usr/local/httpd/htdocs>
Options Indexes FollowSymLinks
</Directory>
Be careful with the directory-path arguments:
They have to literally match the filesystem path which Apache uses
to access the files. Directives applied to a particular
<Directory>
will not apply to files accessed from
that same directory via a different path, such as via different symbolic
links.
Extended regular
expressions can also be used, with the addition of the
~
character. For example:
<Directory ~ "^/www/.*/[0-9]{3}">
would match directories in /www/
that consisted of
three numbers.
If multiple (non-regular expression) <Directory>
sections
match the directory (or one of its parents) containing a document,
then the directives are applied in the order of shortest match
first, interspersed with the directives from the .htaccess files. For example,
with
<Directory />
AllowOverride None
</Directory>
<Directory /home/>
AllowOverride FileInfo
</Directory>
for access to the document /home/web/dir/doc.html
the steps are:
- Apply directive
AllowOverride None
(disabling.htaccess
files). - Apply directive
AllowOverride FileInfo
(for directory/home
). - Apply any
FileInfo
directives in/home/.htaccess
,/home/web/.htaccess
and/home/web/dir/.htaccess
in that order.
Regular expressions are not considered until after all of the normal sections have been applied. Then all of the regular expressions are tested in the order they appeared in the configuration file. For example, with
<Directory ~ abc$>
# ... directives here ...
</Directory>
the regular expression section won't be considered until after
all normal <Directory>
s and
.htaccess
files have been applied. Then the regular
expression will match on /home/abc/public_html/abc
and
the corresponding <Directory>
will
be applied.
Note that the default Apache access for
<Directory />
is Allow from All
.
This means that Apache will serve any file mapped from an URL. It is
recommended that you change this with a block such
as
<Directory />
Order Deny,Allow
Deny from All
</Directory>
and then override this for directories you want accessible. See the Security Tips page for more details.
The directory sections occur in the httpd.conf
file.
<Directory>
directives
cannot nest, and cannot appear in a <Limit>
or <LimitExcept>
section.
См также
- How <Directory>, <Location> and <Files> sections work for an explanation of how these different sections are combined when a request is received
<DirectoryMatch> Директива
Описание: | Enclose directives that apply to file-system directories matching a regular expression and their subdirectories |
---|---|
Синтаксис: | <DirectoryMatch regex>
... </DirectoryMatch> |
Контекст: | server config, virtual host |
Статус: | Core |
Модуль: | core |
<DirectoryMatch>
and
</DirectoryMatch>
are used to enclose a group
of directives which will apply only to the named directory and
sub-directories of that directory, the same as <Directory>
. However, it
takes as an argument a regular expression. For example:
<DirectoryMatch "^/www/(.+/)?[0-9]{3}">
would match directories in /www/
that consisted of three
numbers.
См также
<Directory>
for a description of how regular expressions are mixed in with normal<Directory>
s- How <Directory>, <Location> and <Files> sections work for an explanation of how these different sections are combined when a request is received
DocumentRoot Директива
Описание: | Directory that forms the main document tree visible from the web |
---|---|
Синтаксис: | DocumentRoot directory-path |
По умолчанию: | DocumentRoot /usr/local/apache/htdocs |
Контекст: | server config, virtual host |
Статус: | Core |
Модуль: | core |
This directive sets the directory from which httpd
will serve files. Unless matched by a directive like Alias
, the server appends the
path from the requested URL to the document root to make the
path to the document. Example:
DocumentRoot /usr/web
then an access to
http://www.my.host.com/index.html
refers to
/usr/web/index.html
.
The DocumentRoot
should be specified without
a trailing slash.
См также
EnableMMAP Директива
Описание: | Use memory-mapping to read files during delivery |
---|---|
Синтаксис: | EnableMMAP On|Off |
По умолчанию: | EnableMMAP On |
Контекст: | server config, virtual host, directory, .htaccess |
Перекрывает: | FileInfo |
Статус: | Core |
Модуль: | core |
This directive controls whether the httpd
may use
memory-mapping if it needs to read the contents of a file during
delivery. By default, when the handling of a request requires
access to the data within a file -- for example, when delivering a
server-parsed file using mod_include
-- Apache
memory-maps the file if the OS supports it.
This memory-mapping sometimes yields a performance improvement. But in some environments, it is better to disable the memory-mapping to prevent operational problems:
- On some multiprocessor systems, memory-mapping can reduce the
performance of the
httpd
. - With an NFS-mounted
DocumentRoot
, thehttpd
may crash due to a segmentation fault if a file is deleted or truncated while thehttpd
has it memory-mapped.
For server configurations that are vulnerable to these problems, you should disable memory-mapping of delivered files by specifying:
EnableMMAP Off
For NFS mounted files, this feature may be disabled explicitly for the offending files by specifying:
<Directory "/path-to-nfs-files">
EnableMMAP Off
</Directory>
EnableSendfile Директива
Описание: | Use the kernel sendfile support to deliver files to the client |
---|---|
Синтаксис: | EnableSendfile On|Off |
По умолчанию: | EnableSendfile On |
Контекст: | server config, virtual host, directory, .htaccess |
Перекрывает: | FileInfo |
Статус: | Core |
Модуль: | core |
Совместимость: | Available in version 2.0.44 and later |
This directive controls whether httpd
may use the
sendfile support from the kernel to transmit file contents to the client.
By default, when the handling of a request requires no access
to the data within a file -- for example, when delivering a
static file -- Apache uses sendfile to deliver the file contents
without ever reading the file if the OS supports it.
This sendfile mechanism avoids separate read and send operations, and buffer allocations. But on some platforms or within some filesystems, it is better to disable this feature to avoid operational problems:
- Some platforms may have broken sendfile support that the build system did not detect, especially if the binaries were built on another box and moved to such a machine with broken sendfile support.
- On Linux the use of sendfile triggers TCP-checksum offloading bugs on certain networking cards when using IPv6.
- With a network-mounted
DocumentRoot
(e.g., NFS or SMB), the kernel may be unable to serve the network file through its own cache.
For server configurations that are vulnerable to these problems, you should disable this feature by specifying:
EnableSendfile Off
For NFS or SMB mounted files, this feature may be disabled explicitly for the offending files by specifying:
<Directory "/path-to-nfs-files">
EnableSendfile Off
</Directory>
ErrorDocument Директива
Описание: | What the server will return to the client in case of an error |
---|---|
Синтаксис: | ErrorDocument error-code document |
Контекст: | server config, virtual host, directory, .htaccess |
Перекрывает: | FileInfo |
Статус: | Core |
Модуль: | core |
Совместимость: | Quoting syntax for text messages is different in Apache 2.0 |
In the event of a problem or error, Apache can be configured to do one of four things,
- output a simple hardcoded error message
- output a customized message
- redirect to a local URL-path to handle the problem/error
- redirect to an external URL to handle the problem/error
The first option is the default, while options 2-4 are
configured using the ErrorDocument
directive, which is followed by the HTTP response code and a URL
or a message. Apache will sometimes offer additional information
regarding the problem/error.
URLs can begin with a slash (/) for local web-paths (relative
to the DocumentRoot
), or be a
full URL which the client can resolve. Alternatively, a message
can be provided to be displayed by the browser. Examples:
ErrorDocument 500 http://foo.example.com/cgi-bin/tester
ErrorDocument 404 /cgi-bin/bad_urls.pl
ErrorDocument 401 /subscription_info.html
ErrorDocument 403 "Sorry can't allow you access today"
Additionally, the special value default
can be used
to specify Apache's simple hardcoded message. While not required
under normal circumstances, default
will restore
Apache's simple hardcoded message for configurations that would
otherwise inherit an existing ErrorDocument
.
ErrorDocument 404 /cgi-bin/bad_urls.pl
<Directory /web/docs>
ErrorDocument 404 default
</Directory>
Note that when you specify an ErrorDocument
that points to a remote URL (ie. anything with a method such as
http
in front of it), Apache will send a redirect to the
client to tell it where to find the document, even if the
document ends up being on the same server. This has several
implications, the most important being that the client will not
receive the original error status code, but instead will
receive a redirect status code. This in turn can confuse web
robots and other clients which try to determine if a URL is
valid using the status code. In addition, if you use a remote
URL in an ErrorDocument 401
, the client will not
know to prompt the user for a password since it will not
receive the 401 status code. Therefore, if you use an
ErrorDocument 401
directive then it must refer to a local
document.
Microsoft Internet Explorer (MSIE) will by default ignore
server-generated error messages when they are "too small" and substitute
its own "friendly" error messages. The size threshold varies depending on
the type of error, but in general, if you make your error document
greater than 512 bytes, then MSIE will show the server-generated
error rather than masking it. More information is available in
Microsoft Knowledge Base article
Although most error messages can be overriden, there are certain
circumstances where the internal messages are used regardless of the
setting of ErrorDocument
. In
particular, if a malformed request is detected, normal request processing
will be immediately halted and the internal error message returned.
This is necessary to guard against security problems caused by
bad requests.
Prior to version 2.0, messages were indicated by prefixing them with a single unmatched double quote character.
См также
ErrorLog Директива
Описание: | Location where the server will log errors |
---|---|
Синтаксис: | ErrorLog file-path|syslog[:facility] |
По умолчанию: | ErrorLog logs/error_log (Unix) ErrorLog logs/error.log (Windows and OS/2) |
Контекст: | server config, virtual host |
Статус: | Core |
Модуль: | core |
The ErrorLog
directive sets the name of
the file to which the server will log any errors it encounters. If
the file-path is not absolute then it is assumed to be
relative to the ServerRoot
.
Пример
ErrorLog /var/log/httpd/error_log
If the file-path begins with a pipe (|) then it is assumed to be a command to spawn to handle the error log.
Пример
ErrorLog "|/usr/local/bin/httpd_errors"
Using syslog
instead of a filename enables logging
via syslogd(8) if the system supports it. The default is to use
syslog facility local7
, but you can override this by
using the syslog:facility
syntax where
facility can be one of the names usually documented in
syslog(1).
Пример
ErrorLog syslog:user
SECURITY: See the security tips document for details on why your security could be compromised if the directory where log files are stored is writable by anyone other than the user that starts the server.
Примечание
When entering a file path on non-Unix platforms, care should be taken to make sure that only forward slashed are used even though the platform may allow the use of back slashes. In general it is a good idea to always use forward slashes throughout the configuration files.
См также
FileETag Директива
Описание: | File attributes used to create the ETag HTTP response header |
---|---|
Синтаксис: | FileETag component ... |
По умолчанию: | FileETag INode MTime Size |
Контекст: | server config, virtual host, directory, .htaccess |
Перекрывает: | FileInfo |
Статус: | Core |
Модуль: | core |
The FileETag
directive configures the file
attributes that are used to create the ETag
(entity
tag) response header field when the document is based on a file.
(The ETag
value is used in cache management to save
network bandwidth.) In Apache 1.3.22 and earlier, the
ETag
value was always formed
from the file's inode, size, and last-modified time (mtime). The
FileETag
directive allows you to choose
which of these -- if any -- should be used. The recognized keywords are:
- INode
- The file's i-node number will be included in the calculation
- MTime
- The date and time the file was last modified will be included
- Size
- The number of bytes in the file will be included
- All
- All available fields will be used. This is equivalent to:
FileETag INode MTime Size
- None
- If a document is file-based, no
ETag
field will be included in the response
The INode
, MTime
, and Size
keywords may be prefixed with either +
or -
,
which allow changes to be made to the default setting inherited
from a broader scope. Any keyword appearing without such a prefix
immediately and completely cancels the inherited setting.
If a directory's configuration includes
FileETag INode MTime Size
, and a
subdirectory's includes FileETag -INode
,
the setting for that subdirectory (which will be inherited by
any sub-subdirectories that don't override it) will be equivalent to
FileETag MTime Size
.
<Files> Директива
Описание: | Contains directives that apply to matched filenames |
---|---|
Синтаксис: | <Files filename> ... </Files> |
Контекст: | server config, virtual host, directory, .htaccess |
Перекрывает: | All |
Статус: | Core |
Модуль: | core |
The <Files>
directive
limits the scope of the enclosed directives by filename. It is comparable
to the <Directory>
and <Location>
directives. It should be matched with a </Files>
directive. The directives given within this section will be applied to
any object with a basename (last component of filename) matching the
specified filename. <Files>
sections are processed in the order they appear in the
configuration file, after the <Directory>
sections and
.htaccess
files are read, but before <Location>
sections. Note
that <Files>
can be nested
inside <Directory>
sections to restrict the
portion of the filesystem they apply to.
The filename argument should include a filename, or
a wild-card string, where ?
matches any single character,
and *
matches any sequences of characters. Extended regular
expressions can also be used, with the addition of the
~
character. For example:
<Files ~ "\.(gif|jpe?g|png)$">
would match most common Internet graphics formats. <FilesMatch>
is preferred,
however.
Note that unlike <Directory>
and <Location>
sections, <Files>
sections can be used inside
.htaccess
files. This allows users to control access to
their own files, at a file-by-file level.
См также
- How <Directory>, <Location> and <Files> sections work for an explanation of how these different sections are combined when a request is received
<FilesMatch> Директива
Описание: | Contains directives that apply to regular-expression matched filenames |
---|---|
Синтаксис: | <FilesMatch regex> ... </FilesMatch> |
Контекст: | server config, virtual host, directory, .htaccess |
Перекрывает: | All |
Статус: | Core |
Модуль: | core |
The <FilesMatch>
directive
limits the scope of the enclosed directives by filename, just as the
<Files>
directive
does. However, it accepts a regular expression. For example:
<FilesMatch "\.(gif|jpe?g|png)$">
would match most common Internet graphics formats.
См также
- How <Directory>, <Location> and <Files> sections work for an explanation of how these different sections are combined when a request is received
ForceType Директива
Описание: | Forces all matching files to be served with the specified MIME content-type |
---|---|
Синтаксис: | ForceType MIME-type|None |
Контекст: | directory, .htaccess |
Перекрывает: | FileInfo |
Статус: | Core |
Модуль: | core |
Совместимость: | Moved to the core in Apache 2.0 |
When placed into an .htaccess
file or a
<Directory>
, or
<Location>
or
<Files>
section, this directive forces all matching files to be served
with the content type identification given by
MIME-type. For example, if you had a directory full of
GIF files, but did not want to label them all with .gif
,
you might want to use:
ForceType image/gif
Note that unlike DefaultType
,
this directive overrides all mime-type associations, including
filename extensions, that might identify the media type.
You can override any ForceType
setting
by using the value of None
:
# force all files to be image/gif:
<Location /images>
ForceType image/gif
</Location>
# but normal mime-type associations here:
<Location /images/mixed>
ForceType None
</Location>
HostnameLookups Директива
Описание: | Enables DNS lookups on client IP addresses |
---|---|
Синтаксис: | HostnameLookups On|Off|Double |
По умолчанию: | HostnameLookups Off |
Контекст: | server config, virtual host, directory |
Статус: | Core |
Модуль: | core |
This directive enables DNS lookups so that host names can be
logged (and passed to CGIs/SSIs in REMOTE_HOST
).
The value Double
refers to doing double-reverse
DNS lookup. That is, after a reverse lookup is performed, a forward
lookup is then performed on that result. At least one of the IP
addresses in the forward lookup must match the original
address. (In "tcpwrappers" terminology this is called
PARANOID
.)
Regardless of the setting, when mod_access
is
used for controlling access by hostname, a double reverse lookup
will be performed. This is necessary for security. Note that the
result of this double-reverse isn't generally available unless you
set HostnameLookups Double
. For example, if only
HostnameLookups On
and a request is made to an object
that is protected by hostname restrictions, regardless of whether
the double-reverse fails or not, CGIs will still be passed the
single-reverse result in REMOTE_HOST
.
The default is Off
in order to save the network
traffic for those sites that don't truly need the reverse
lookups done. It is also better for the end users because they
don't have to suffer the extra latency that a lookup entails.
Heavily loaded sites should leave this directive
Off
, since DNS lookups can take considerable
amounts of time. The utility logresolve
, compiled by
default to the bin
subdirectory of your installation
directory, can be used to look up host names from logged IP addresses
offline.
IdentityCheck Директива
Описание: | Enables logging of the RFC1413 identity of the remote user |
---|---|
Синтаксис: | IdentityCheck On|Off |
По умолчанию: | IdentityCheck Off |
Контекст: | server config, virtual host, directory |
Статус: | Core |
Модуль: | core |
This directive enables RFC1413-compliant logging of the remote user name for each connection, where the client machine runs identd or something similar. This information is logged in the access log.
The information should not be trusted in any way except for rudimentary usage tracking.
Note that this can cause serious latency problems accessing your server since every request requires one of these lookups to be performed. When firewalls are involved each lookup might possibly fail and add 30 seconds of latency to each hit. So in general this is not very useful on public servers accessible from the Internet.
<IfDefine> Директива
Описание: | Encloses directives that will be processed only if a test is true at startup |
---|---|
Синтаксис: | <IfDefine [!]parameter-name> ...
</IfDefine> |
Контекст: | server config, virtual host, directory, .htaccess |
Перекрывает: | All |
Статус: | Core |
Модуль: | core |
The <IfDefine test>...</IfDefine>
section is used to mark directives that are conditional. The
directives within an <IfDefine>
section are only processed if the test is true. If
test is false, everything between the start and end markers is
ignored.
The test in the <IfDefine>
section directive can be one of two forms:
- parameter-name
!
parameter-name
In the former case, the directives between the start and end markers are only processed if the parameter named parameter-name is defined. The second format reverses the test, and only processes the directives if parameter-name is not defined.
The parameter-name argument is a define as given on
the httpd
command line via -Dparameter-
, at the time the server was started.
<IfDefine>
sections are
nest-able, which can be used to implement simple
multiple-parameter tests. Example:
httpd -DReverseProxy ...
# httpd.conf
<IfDefine ReverseProxy>
LoadModule rewrite_module modules/mod_rewrite.so
LoadModule proxy_module modules/libproxy.so
</IfDefine>
<IfModule> Директива
Описание: | Encloses directives that are processed conditional on the presence or absence of a specific module |
---|---|
Синтаксис: | <IfModule [!]module-name> ...
</IfModule> |
Контекст: | server config, virtual host, directory, .htaccess |
Перекрывает: | All |
Статус: | Core |
Модуль: | core |
The <IfModule test>...</IfModule>
section is used to mark directives that are conditional on the presence of
a specific module. The directives within an <IfModule>
section are only processed if the test
is true. If test is false, everything between the start and
end markers is ignored.
The test in the <IfModule>
section directive can be one of two forms:
- module name
- !module name
In the former case, the directives between the start and end
markers are only processed if the module named module
name is included in Apache -- either compiled in or
dynamically loaded using LoadModule
. The second format reverses the test,
and only processes the directives if module name is
not included.
The module name argument is the file name of the
module, at the time it was compiled. For example,
mod_rewrite.c
. If a module consists of several
source files, use the name of the file containing the string
STANDARD20_MODULE_STUFF
.
<IfModule>
sections are
nest-able, which can be used to implement simple multiple-module
tests.
<IfModule>
sections.Include Директива
Описание: | Includes other configuration files from within the server configuration files |
---|---|
Синтаксис: | Include file-path|directory-path |
Контекст: | server config, virtual host, directory |
Статус: | Core |
Модуль: | core |
Совместимость: | Wildcard matching available in 2.0.41 and later |
This directive allows inclusion of other configuration files from within the server configuration files.
Shell-style (fnmatch()
) wildcard characters can be used to
include several files at once, in alphabetical order. In
addition, if Include
points to a directory,
rather than a file, Apache will read all files in that directory
and any subdirectory. But including entire directories is not
recommended, because it is easy to accidentally leave temporary
files in a directory that can cause httpd
to
fail.
The file path specified may be an absolute path, or may be relative
to the ServerRoot
directory.
Examples:
Include /usr/local/apache2/conf/ssl.conf
Include /usr/local/apache2/conf/vhosts/*.conf
Or, providing paths relative to your ServerRoot
directory:
Include conf/ssl.conf
Include conf/vhosts/*.conf
Running apachectl configtest
will give you a list
of the files that are being processed during the configuration
check:
root@host# apachectl configtest
Processing config file: /usr/local/apache2/conf/ssl.conf
Processing config file: /usr/local/apache2/conf/vhosts/vhost1.conf
Processing config file: /usr/local/apache2/conf/vhosts/vhost2.conf
Syntax OK
См также
KeepAlive Директива
Описание: | Enables HTTP persistent connections |
---|---|
Синтаксис: | KeepAlive On|Off |
По умолчанию: | KeepAlive On |
Контекст: | server config, virtual host |
Статус: | Core |
Модуль: | core |
The Keep-Alive extension to HTTP/1.0 and the persistent
connection feature of HTTP/1.1 provide long-lived HTTP sessions
which allow multiple requests to be sent over the same TCP
connection. In some cases this has been shown to result in an
almost 50% speedup in latency times for HTML documents with
many images. To enable Keep-Alive connections, set
KeepAlive On
.
For HTTP/1.0 clients, Keep-Alive connections will only be used if they are specifically requested by a client. In addition, a Keep-Alive connection with an HTTP/1.0 client can only be used when the length of the content is known in advance. This implies that dynamic content such as CGI output, SSI pages, and server-generated directory listings will generally not use Keep-Alive connections to HTTP/1.0 clients. For HTTP/1.1 clients, persistent connections are the default unless otherwise specified. If the client requests it, chunked encoding will be used in order to send content of unknown length over persistent connections.
См также
KeepAliveTimeout Директива
Описание: | Amount of time the server will wait for subsequent requests on a persistent connection |
---|---|
Синтаксис: | KeepAliveTimeout seconds |
По умолчанию: | KeepAliveTimeout 15 |
Контекст: | server config, virtual host |
Статус: | Core |
Модуль: | core |
The number of seconds Apache will wait for a subsequent
request before closing the connection. Once a request has been
received, the timeout value specified by the
Timeout
directive applies.
Setting KeepAliveTimeout
to a high value
may cause performance problems in heavily loaded servers. The
higher the timeout, the more server processes will be kept
occupied waiting on connections with idle clients.
<Limit> Директива
Описание: | Restrict enclosed access controls to only certain HTTP methods |
---|---|
Синтаксис: | <Limit method [method] ... > ...
</Limit> |
Контекст: | server config, virtual host, directory, .htaccess |
Перекрывает: | All |
Статус: | Core |
Модуль: | core |
Access controls are normally effective for
all access methods, and this is the usual
desired behavior. In the general case, access control
directives should not be placed within a
<Limit>
section.
The purpose of the <Limit>
directive is to restrict the effect of the access controls to the
nominated HTTP methods. For all other methods, the access
restrictions that are enclosed in the <Limit>
bracket will have no
effect. The following example applies the access control
only to the methods POST
, PUT
, and
DELETE
, leaving all other methods unprotected:
<Limit POST PUT DELETE>
Require valid-user
</Limit>
The method names listed can be one or more of: GET
,
POST
, PUT
, DELETE
,
CONNECT
, OPTIONS
,
PATCH
, PROPFIND
, PROPPATCH
,
MKCOL
, COPY
, MOVE
,
LOCK
, and UNLOCK
. The method name is
case-sensitive. If GET
is used it will also
restrict HEAD
requests. The TRACE
method
cannot be limited.
<LimitExcept>
section should always be
used in preference to a <Limit>
section when restricting access,
since a <LimitExcept>
section provides protection
against arbitrary methods.<LimitExcept> Директива
Описание: | Restrict access controls to all HTTP methods except the named ones |
---|---|
Синтаксис: | <LimitExcept method [method] ... > ...
</LimitExcept> |
Контекст: | server config, virtual host, directory, .htaccess |
Перекрывает: | All |
Статус: | Core |
Модуль: | core |
<LimitExcept>
and
</LimitExcept>
are used to enclose
a group of access control directives which will then apply to any
HTTP access method not listed in the arguments;
i.e., it is the opposite of a <Limit>
section and can be used to control
both standard and nonstandard/unrecognized methods. See the
documentation for <Limit>
for more details.
For example:
<LimitExcept POST GET>
Require valid-user
</LimitExcept>
LimitInternalRecursion Директива
Описание: | Determine maximum number of internal redirects and nested subrequests |
---|---|
Синтаксис: | LimitInternalRecursion number [number] |
По умолчанию: | LimitInternalRecursion 10 |
Контекст: | server config, virtual host |
Статус: | Core |
Модуль: | core |
Совместимость: | Available in Apache 2.0.47 and later |
An internal redirect happens, for example, when using the Action
directive, which internally
redirects the original request to a CGI script. A subrequest is Apache's
mechanism to find out what would happen for some URI if it were requested.
For example, mod_dir
uses subrequests to look for the
files listed in the DirectoryIndex
directive.
LimitInternalRecursion
prevents the server
from crashing when entering an infinite loop of internal redirects or
subrequests. Such loops are usually caused by misconfigurations.
The directive stores two different limits, which are evaluated on per-request basis. The first number is the maximum number of internal redirects, that may follow each other. The second number determines, how deep subrequests may be nested. If you specify only one number, it will be assigned to both limits.
Пример
LimitInternalRecursion 5
LimitRequestBody Директива
Описание: | Restricts the total size of the HTTP request body sent from the client |
---|---|
Синтаксис: | LimitRequestBody bytes |
По умолчанию: | LimitRequestBody 0 |
Контекст: | server config, virtual host, directory, .htaccess |
Перекрывает: | All |
Статус: | Core |
Модуль: | core |
This directive specifies the number of bytes from 0 (meaning unlimited) to 2147483647 (2GB) that are allowed in a request body.
The LimitRequestBody
directive allows
the user to set a limit on the allowed size of an HTTP request
message body within the context in which the directive is given
(server, per-directory, per-file or per-location). If the client
request exceeds that limit, the server will return an error
response instead of servicing the request. The size of a normal
request message body will vary greatly depending on the nature of
the resource and the methods allowed on that resource. CGI scripts
typically use the message body for retrieving form information.
Implementations of the PUT
method will require
a value at least as large as any representation that the server
wishes to accept for that resource.
This directive gives the server administrator greater control over abnormal client request behavior, which may be useful for avoiding some forms of denial-of-service attacks.
If, for example, you are permitting file upload to a particular location, and wish to limit the size of the uploaded file to 100K, you might use the following directive:
LimitRequestBody 102400
LimitRequestFields Директива
Описание: | Limits the number of HTTP request header fields that will be accepted from the client |
---|---|
Синтаксис: | LimitRequestFields number |
По умолчанию: | LimitRequestFields 100 |
Контекст: | server config |
Статус: | Core |
Модуль: | core |
Number is an integer from 0 (meaning unlimited) to
32767. The default value is defined by the compile-time
constant DEFAULT_LIMIT_REQUEST_FIELDS
(100 as
distributed).
The LimitRequestFields
directive allows
the server administrator to modify the limit on the number of
request header fields allowed in an HTTP request. A server needs
this value to be larger than the number of fields that a normal
client request might include. The number of request header fields
used by a client rarely exceeds 20, but this may vary among
different client implementations, often depending upon the extent
to which a user has configured their browser to support detailed
content negotiation. Optional HTTP extensions are often expressed
using request header fields.
This directive gives the server administrator greater control over abnormal client request behavior, which may be useful for avoiding some forms of denial-of-service attacks. The value should be increased if normal clients see an error response from the server that indicates too many fields were sent in the request.
For example:
LimitRequestFields 50
LimitRequestFieldSize Директива
Описание: | Limits the size of the HTTP request header allowed from the client |
---|---|
Синтаксис: | LimitRequestFieldsize bytes |
По умолчанию: | LimitRequestFieldsize 8190 |
Контекст: | server config |
Статус: | Core |
Модуль: | core |
This directive specifies the number of bytes that will be allowed in an HTTP request header.
The LimitRequestFieldSize
directive
allows the server administrator to reduce or increase the limit
on the allowed size of an HTTP request header field. A server
needs this value to be large enough to hold any one header field
from a normal client request. The size of a normal request header
field will vary greatly among different client implementations,
often depending upon the extent to which a user has configured
their browser to support detailed content negotiation. SPNEGO
authentication headers can be up to 12392 bytes.
This directive gives the server administrator greater control over abnormal client request behavior, which may be useful for avoiding some forms of denial-of-service attacks.
For example:
LimitRequestFieldSize 4094
LimitRequestLine Директива
Описание: | Limit the size of the HTTP request line that will be accepted from the client |
---|---|
Синтаксис: | LimitRequestLine bytes |
По умолчанию: | LimitRequestLine 8190 |
Контекст: | server config |
Статус: | Core |
Модуль: | core |
This directive sets the number of bytes from 0 to
the value of the compile-time constant
DEFAULT_LIMIT_REQUEST_LINE
(8190 as distributed)
that will be allowed on the HTTP request-line.
The LimitRequestLine
directive allows
the server administrator to reduce the limit on the allowed size
of a client's HTTP request-line below the normal input buffer size
compiled with the server. Since the request-line consists of the
HTTP method, URI, and protocol version, the
LimitRequestLine
directive places a
restriction on the length of a request-URI allowed for a request
on the server. A server needs this value to be large enough to
hold any of its resource names, including any information that
might be passed in the query part of a GET
request.
This directive gives the server administrator greater control over abnormal client request behavior, which may be useful for avoiding some forms of denial-of-service attacks.
For example:
LimitRequestLine 4094
LimitXMLRequestBody Директива
Описание: | Limits the size of an XML-based request body |
---|---|
Синтаксис: | LimitXMLRequestBody bytes |
По умолчанию: | LimitXMLRequestBody 1000000 |
Контекст: | server config, virtual host, directory, .htaccess |
Перекрывает: | All |
Статус: | Core |
Модуль: | core |
Limit (in bytes) on maximum size of an XML-based request
body. A value of 0
will disable any checking.
Пример:
LimitXMLRequestBody 0
<Location> Директива
Описание: | Applies the enclosed directives only to matching URLs |
---|---|
Синтаксис: | <Location
URL-path|URL> ... </Location> |
Контекст: | server config, virtual host |
Статус: | Core |
Модуль: | core |
The <Location>
directive
limits the scope of the enclosed directives by URL. It is similar to the
<Directory>
directive, and starts a subsection which is terminated with a
</Location>
directive. <Location>
sections are processed in the
order they appear in the configuration file, after the <Directory>
sections and
.htaccess
files are read, and after the <Files>
sections.
<Location>
sections operate
completely outside the filesystem. This has several consequences.
Most importantly, <Location>
directives should not be used to control access to filesystem
locations. Since several different URLs may map to the same
filesystem location, such access controls may by circumvented.
When to use <Location>
Use <Location>
to apply
directives to content that lives outside the filesystem. For
content that lives in the filesystem, use <Directory>
and <Files>
. An exception is
<Location />
, which is an easy way to
apply a configuration to the entire server.
For all origin (non-proxy) requests, the URL to be matched is a
URL-path of the form /path/
. No scheme, hostname,
port, or query string may be included. For proxy requests, the
URL to be matched is of the form
scheme://servername/path
, and you must include the
prefix.
The URL may use wildcards. In a wild-card string, ?
matches
any single character, and *
matches any sequences of
characters.
Extended regular
expressions can also be used, with the addition of the
~
character. For example:
<Location ~ "/(extra|special)/data">
would match URLs that contained the substring /extra/data
or /special/data
. The directive <LocationMatch>
behaves
identical to the regex version of <Location>
.
The <Location>
functionality is especially useful when combined with the
SetHandler
directive. For example, to enable status requests, but allow them
only from browsers at foo.com
, you might use:
<Location /status>
SetHandler server-status
Order Deny,Allow
Deny from all
Allow from .foo.com
</Location>
Note about / (slash)
The slash character has special meaning depending on where in a
URL it appears. People may be used to its behavior in the filesystem
where multiple adjacent slashes are frequently collapsed to a single
slash (i.e., /home///foo
is the same as
/home/foo
). In URL-space this is not necessarily true.
The <LocationMatch>
directive and the regex version of <Location>
require you to explicitly specify multiple
slashes if that is your intention.
For example, <LocationMatch ^/abc>
would match
the request URL /abc
but not the request URL
//abc
. The (non-regex) <Location>
directive behaves similarly when used for
proxy requests. But when (non-regex) <Location>
is used for non-proxy requests it will
implicitly match multiple slashes with a single slash. For example,
if you specify <Location /abc/def>
and the
request is to /abc//def
then it will match.
См также
- How <Directory>, <Location> and <Files> sections work for an explanation of how these different sections are combined when a request is received
<LocationMatch> Директива
Описание: | Applies the enclosed directives only to regular-expression matching URLs |
---|---|
Синтаксис: | <LocationMatch
regex> ... </LocationMatch> |
Контекст: | server config, virtual host |
Статус: | Core |
Модуль: | core |
The <LocationMatch>
directive
limits the scope of the enclosed directives by URL, in an identical manner
to <Location>
. However,
it takes a regular expression as an argument instead of a simple
string. For example:
<LocationMatch "/(extra|special)/data">
would match URLs that contained the substring /extra/data
or /special/data
.
См также
- How <Directory>, <Location> and <Files> sections work for an explanation of how these different sections are combined when a request is received
LogLevel Директива
Описание: | Controls the verbosity of the ErrorLog |
---|---|
Синтаксис: | LogLevel level |
По умолчанию: | LogLevel warn |
Контекст: | server config, virtual host |
Статус: | Core |
Модуль: | core |
LogLevel
adjusts the verbosity of the
messages recorded in the error logs (see ErrorLog
directive). The following
levels are available, in order of decreasing
significance:
Level | Description | Пример |
---|---|---|
emerg |
Emergencies - system is unusable. | "Child cannot open lock file. Exiting" |
alert |
Action must be taken immediately. | "getpwuid: couldn't determine user name from uid" |
crit |
Critical Conditions. | "socket: Failed to get a socket, exiting child" |
error |
Error conditions. | "Premature end of script headers" |
warn |
Warning conditions. | "child process 1234 did not exit, sending another SIGHUP" |
notice |
Normal but significant condition. | "httpd: caught SIGBUS, attempting to dump core in ..." |
info |
Informational. | "Server seems busy, (you may need to increase StartServers, or Min/MaxSpareServers)..." |
debug |
Debug-level messages | "Opening config file ..." |
When a particular level is specified, messages from all
other levels of higher significance will be reported as well.
E.g., when LogLevel info
is specified,
then messages with log levels of notice
and
warn
will also be posted.
Using a level of at least crit
is
recommended.
For example:
LogLevel notice
Примечание
When logging to a regular file messages of the level
notice
cannot be suppressed and thus are always
logged. However, this doesn't apply when logging is done
using syslog
.
MaxKeepAliveRequests Директива
Описание: | Number of requests allowed on a persistent connection |
---|---|
Синтаксис: | MaxKeepAliveRequests number |
По умолчанию: | MaxKeepAliveRequests 100 |
Контекст: | server config, virtual host |
Статус: | Core |
Модуль: | core |
The MaxKeepAliveRequests
directive
limits the number of requests allowed per connection when
KeepAlive
is on. If it is
set to 0
, unlimited requests will be allowed. We
recommend that this setting be kept to a high value for maximum
server performance.
For example:
MaxKeepAliveRequests 500
NameVirtualHost Директива
Описание: | Designates an IP address for name-virtual hosting |
---|---|
Синтаксис: | NameVirtualHost addr[:port] |
Контекст: | server config |
Статус: | Core |
Модуль: | core |
The NameVirtualHost
directive is a
required directive if you want to configure name-based virtual hosts.
Although addr can be hostname it is recommended that you always use an IP address, e.g.
NameVirtualHost 111.22.33.44
With the NameVirtualHost
directive you
specify the IP address on which the server will receive requests
for the name-based virtual hosts. This will usually be the address
to which your name-based virtual host names resolve. In cases
where a firewall or other proxy receives the requests and forwards
them on a different IP address to the server, you must specify the
IP address of the physical interface on the machine which will be
servicing the requests. If you have multiple name-based hosts on
multiple addresses, repeat the directive for each address.
Примечание
Note, that the "main server" and any _default_
servers
will never be served for a request to a
NameVirtualHost
IP address (unless for some
reason you specify NameVirtualHost
but then
don't define any VirtualHost
s for that
address).
Optionally you can specify a port number on which the name-based virtual hosts should be used, e.g.
NameVirtualHost 111.22.33.44:8080
IPv6 addresses must be enclosed in square brackets, as shown in the following example:
NameVirtualHost [2001:db8::a00:20ff:fea7:ccea]:8080
To receive requests on all interfaces, you can use an argument of
*
NameVirtualHost *
Argument to <VirtualHost>
directive
Note that the argument to the <VirtualHost>
directive must
exactly match the argument to the NameVirtualHost
directive.
NameVirtualHost 1.2.3.4
<VirtualHost 1.2.3.4>
# ...
</VirtualHost>
См также
Options Директива
Описание: | Configures what features are available in a particular directory |
---|---|
Синтаксис: | Options
[+|-]option [[+|-]option] ... |
По умолчанию: | Options All |
Контекст: | server config, virtual host, directory, .htaccess |
Перекрывает: | Options |
Статус: | Core |
Модуль: | core |
The Options
directive controls which
server features are available in a particular directory.
option can be set to None
, in which
case none of the extra features are enabled, or one or more of
the following:
All
- All options except for
MultiViews
. This is the default setting. ExecCGI
-
Execution of CGI scripts using
mod_cgi
is permitted. FollowSymLinks
-
The server will follow symbolic links in this directory.
Even though the server follows the symlink it does not change the pathname used to match against
<Directory>
sections.Note also, that this option gets ignored if set inside a
<Location>
section. Includes
-
Server-side includes provided by
mod_include
are permitted. IncludesNOEXEC
-
Server-side includes are permitted, but the
#exec cmd
and#exec cgi
are disabled. It is still possible to#include virtual
CGI scripts fromScriptAlias
ed directories. Indexes
-
If a URL which maps to a directory is requested, and there
is no
DirectoryIndex
(e.g.,index.html
) in that directory, thenmod_autoindex
will return a formatted listing of the directory. MultiViews
-
Content negotiated
"MultiViews" are allowed using
mod_negotiation
. SymLinksIfOwnerMatch
- The server will only follow symbolic links for which the
target file or directory is owned by the same user id as the
link.
Примечание
This option gets ignored if set inside a<Location>
section.
Normally, if multiple Options
could
apply to a directory, then the most specific one is used and
others are ignored; the options are not merged. (See how sections are merged.)
However if all the options on the
Options
directive are preceded by a
+
or -
symbol, the options are
merged. Any options preceded by a +
are added to the
options currently in force, and any options preceded by a
-
are removed from the options currently in
force.
Предупреждение
Mixing Options
with a +
or
-
with those without is not valid syntax, and is likely
to cause unexpected results.
For example, without any +
and -
symbols:
<Directory /web/docs>
Options Indexes FollowSymLinks
</Directory>
<Directory /web/docs/spec>
Options Includes
</Directory>
then only Includes
will be set for the
/web/docs/spec
directory. However if the second
Options
directive uses the +
and
-
symbols:
<Directory /web/docs>
Options Indexes FollowSymLinks
</Directory>
<Directory /web/docs/spec>
Options +Includes -Indexes
</Directory>
then the options FollowSymLinks
and
Includes
are set for the /web/docs/spec
directory.
Примечание
Using -IncludesNOEXEC
or
-Includes
disables server-side includes completely
regardless of the previous setting.
The default in the absence of any other settings is
All
.
Require Директива
Описание: | Selects which authenticated users can access a resource |
---|---|
Синтаксис: | Require entity-name [entity-name] ... |
Контекст: | directory, .htaccess |
Перекрывает: | AuthConfig |
Статус: | Core |
Модуль: | core |
This directive selects which authenticated users can access a resource. The allowed syntaxes are:
Require user userid [userid] ...
- Only the named users can access the resource.
Require group group-name [group-name] ...
- Only users in the named groups can access the resource.
Require valid-user
- All valid users can access the resource.
Require
must be accompanied by
AuthName
and AuthType
directives, and directives such
as AuthUserFile
and AuthGroupFile
(to
define users and groups) in order to work correctly. Example:
AuthType Basic
AuthName "Restricted Resource"
AuthUserFile /web/users
AuthGroupFile /web/groups
Require group admin
Access controls which are applied in this way are effective for
all methods. This is what is normally
desired. If you wish to apply access controls only to
specific methods, while leaving other methods unprotected, then
place the Require
statement into a
<Limit>
section.
См также
RLimitCPU Директива
Описание: | Limits the CPU consumption of processes launched by Apache children |
---|---|
Синтаксис: | RLimitCPU seconds|max [seconds|max] |
По умолчанию: | Unset; uses operating system defaults |
Контекст: | server config, virtual host, directory, .htaccess |
Перекрывает: | All |
Статус: | Core |
Модуль: | core |
Takes 1 or 2 parameters. The first parameter sets the soft
resource limit for all processes and the second parameter sets
the maximum resource limit. Either parameter can be a number,
or max
to indicate to the server that the limit should
be set to the maximum allowed by the operating system
configuration. Raising the maximum resource limit requires that
the server is running as root
, or in the initial startup
phase.
This applies to processes forked off from Apache children servicing requests, not the Apache children themselves. This includes CGI scripts and SSI exec commands, but not any processes forked off from the Apache parent such as piped logs.
CPU resource limits are expressed in seconds per process.
См также
RLimitMEM Директива
Описание: | Limits the memory consumption of processes launched by Apache children |
---|---|
Синтаксис: | RLimitMEM bytes|max [bytes|max] |
По умолчанию: | Unset; uses operating system defaults |
Контекст: | server config, virtual host, directory, .htaccess |
Перекрывает: | All |
Статус: | Core |
Модуль: | core |
Takes 1 or 2 parameters. The first parameter sets the soft
resource limit for all processes and the second parameter sets
the maximum resource limit. Either parameter can be a number,
or max
to indicate to the server that the limit should
be set to the maximum allowed by the operating system
configuration. Raising the maximum resource limit requires that
the server is running as root
, or in the initial startup
phase.
This applies to processes forked off from Apache children servicing requests, not the Apache children themselves. This includes CGI scripts and SSI exec commands, but not any processes forked off from the Apache parent such as piped logs.
Memory resource limits are expressed in bytes per process.
См также
RLimitNPROC Директива
Описание: | Limits the number of processes that can be launched by processes launched by Apache children |
---|---|
Синтаксис: | RLimitNPROC number|max [number|max] |
По умолчанию: | Unset; uses operating system defaults |
Контекст: | server config, virtual host, directory, .htaccess |
Перекрывает: | All |
Статус: | Core |
Модуль: | core |
Takes 1 or 2 parameters. The first parameter sets the soft
resource limit for all processes and the second parameter sets
the maximum resource limit. Either parameter can be a number,
or max
to indicate to the server that the limit
should be set to the maximum allowed by the operating system
configuration. Raising the maximum resource limit requires that
the server is running as root
, or in the initial startup
phase.
This applies to processes forked off from Apache children servicing requests, not the Apache children themselves. This includes CGI scripts and SSI exec commands, but not any processes forked off from the Apache parent such as piped logs.
Process limits control the number of processes per user.
Примечание
If CGI processes are not running
under user ids other than the web server user id, this directive
will limit the number of processes that the server itself can
create. Evidence of this situation will be indicated by
cannot fork
messages in the
error_log
.
См также
Satisfy Директива
Описание: | Interaction between host-level access control and user authentication |
---|---|
Синтаксис: | Satisfy Any|All |
По умолчанию: | Satisfy All |
Контекст: | directory, .htaccess |
Перекрывает: | AuthConfig |
Статус: | Core |
Модуль: | core |
Совместимость: | Influenced by <Limit> and <LimitExcept> in version 2.0.51 and
later |
Access policy if both Allow
and Require
used. The parameter can be
either All
or Any
. This directive is only
useful if access to a particular area is being restricted by both
username/password and client host address. In this case
the default behavior (All
) is to require that the client
passes the address access restriction and enters a valid
username and password. With the Any
option the client will be
granted access if they either pass the host restriction or enter a
valid username and password. This can be used to password restrict
an area, but to let clients from particular addresses in without
prompting for a password.
For example, if you wanted to let people on your network have unrestricted access to a portion of your website, but require that people outside of your network provide a password, you could use a configuration similar to the following:
Require valid-user
Allow from 192.168.1
Satisfy Any
Since version 2.0.51 Satisfy
directives can
be restricted to particular methods by <Limit>
and <LimitExcept>
sections.
См также
ScriptInterpreterSource Директива
Описание: | Technique for locating the interpreter for CGI scripts |
---|---|
Синтаксис: | ScriptInterpreterSource Registry|Registry-Strict|Script |
По умолчанию: | ScriptInterpreterSource Script |
Контекст: | server config, virtual host, directory, .htaccess |
Перекрывает: | FileInfo |
Статус: | Core |
Модуль: | core |
Совместимость: | Win32 only;
option Registry-Strict is available in Apache 2.0 and
later |
This directive is used to control how Apache finds the
interpreter used to run CGI scripts. The default setting is
Script
. This causes Apache to use the interpreter pointed to
by the shebang line (first line, starting with #!
) in the
script. On Win32 systems this line usually looks like:
#!C:/Perl/bin/perl.exe
or, if perl
is in the PATH
, simply:
#!perl
Setting ScriptInterpreterSource Registry
will
cause the Windows Registry tree HKEY_CLASSES_ROOT
to be
searched using the script file extension (e.g., .pl
) as a
search key. The command defined by the registry subkey
Shell\ExecCGI\Command
or, if it does not exist, by the subkey
Shell\Open\Command
is used to open the script file. If the
registry keys cannot be found, Apache falls back to the behavior of the
Script
option.
Безопасность
Be careful when using ScriptInterpreterSource
Registry
with ScriptAlias
'ed directories, because
Apache will try to execute every file within this
directory. The Registry
setting may cause undesired
program calls on files which are typically not executed. For
example, the default open command on .htm
files on
most Windows systems will execute Microsoft Internet Explorer, so
any HTTP request for an .htm
file existing within the
script directory would start the browser in the background on the
server. This is a good way to crash your system within a minute or
so.
The option Registry-Strict
which is new in Apache
2.0 does the same thing as Registry
but uses only the
subkey Shell\ExecCGI\Command
. The
ExecCGI
key is not a common one. It must be
configured manually in the windows registry and hence prevents
accidental program calls on your system.
ServerAdmin Директива
Описание: | Email address that the server includes in error messages sent to the client |
---|---|
Синтаксис: | ServerAdmin email-address |
Контекст: | server config, virtual host |
Статус: | Core |
Модуль: | core |
The ServerAdmin
sets the e-mail address
that the server includes in any error messages it returns to the
client.
It may be worth setting up a dedicated address for this, e.g.
ServerAdmin www-admin@foo.example.com
as users do not always mention that they are talking about the server!
ServerAlias Директива
Описание: | Alternate names for a host used when matching requests to name-virtual hosts |
---|---|
Синтаксис: | ServerAlias hostname [hostname] ... |
Контекст: | virtual host |
Статус: | Core |
Модуль: | core |
The ServerAlias
directive sets the
alternate names for a host, for use with name-based virtual hosts.
<VirtualHost *>
ServerName server.domain.com
ServerAlias server server2.domain.com server2
# ...
</VirtualHost>
См также
ServerName Директива
Описание: | Hostname and port that the server uses to identify itself |
---|---|
Синтаксис: | ServerName fully-qualified-domain-name[:port] |
Контекст: | server config, virtual host |
Статус: | Core |
Модуль: | core |
Совместимость: | In version 2.0, this
directive supersedes the functionality of the Port
directive from version 1.3. |
The ServerName
directive sets the hostname and
port that the server uses to identify itself. This is used when
creating redirection URLs. For example, if the name of the
machine hosting the web server is simple.example.com
,
but the machine also has the DNS alias www.example.com
and you wish the web server to be so identified, the following
directive should be used:
ServerName www.example.com:80
If no ServerName
is specified, then the
server attempts to deduce the hostname by performing a reverse
lookup on the IP address. If no port is specified in the
ServerName
, then the server will use the port
from the incoming
request. For optimal reliability and predictability, you should
specify an explicit hostname and port using the
ServerName
directive.
If you are using name-based virtual hosts,
the ServerName
inside a
<VirtualHost>
section specifies what hostname must appear in the request's
Host:
header to match this virtual host.
See the description of the
UseCanonicalName
directive for
settings which determine whether self-referential URL's (e.g., by the
mod_dir
module) will refer to the
specified port, or to the port number given in the client's request.
См также
ServerPath Директива
Описание: | Legacy URL pathname for a name-based virtual host that is accessed by an incompatible browser |
---|---|
Синтаксис: | ServerPath URL-path |
Контекст: | virtual host |
Статус: | Core |
Модуль: | core |
The ServerPath
directive sets the legacy
URL pathname for a host, for use with name-based virtual hosts.
См также
ServerRoot Директива
Описание: | Base directory for the server installation |
---|---|
Синтаксис: | ServerRoot directory-path |
По умолчанию: | ServerRoot /usr/local/apache |
Контекст: | server config |
Статус: | Core |
Модуль: | core |
The ServerRoot
directive sets the
directory in which the server lives. Typically it will contain the
subdirectories conf/
and logs/
. Relative
paths in other configuration directives (such as Include
or LoadModule
, for example) are taken as
relative to this directory.
Пример
ServerRoot /home/httpd
См также
- the
-d
option tohttpd
- the
security tips for information on how to properly set
permissions on the
ServerRoot
ServerSignature Директива
Описание: | Configures the footer on server-generated documents |
---|---|
Синтаксис: | ServerSignature On|Off|EMail |
По умолчанию: | ServerSignature Off |
Контекст: | server config, virtual host, directory, .htaccess |
Перекрывает: | All |
Статус: | Core |
Модуль: | core |
The ServerSignature
directive allows the
configuration of a trailing footer line under server-generated
documents (error messages, mod_proxy
ftp directory
listings, mod_info
output, ...). The reason why you
would want to enable such a footer line is that in a chain of proxies,
the user often has no possibility to tell which of the chained servers
actually produced a returned error message.
The Off
setting, which is the default, suppresses the footer line (and is
therefore compatible with the behavior of Apache-1.2 and
below). The On
setting simply adds a line with the
server version number and ServerName
of the serving virtual host,
and the EMail
setting additionally creates a
"mailto:" reference to the ServerAdmin
of the referenced
document.
After version 2.0.44, the details of the server version number
presented are controlled by the ServerTokens
directive.
См также
ServerTokens Директива
Описание: | Configures the Server HTTP response
header |
---|---|
Синтаксис: | ServerTokens Major|Minor|Min[imal]|Prod[uctOnly]|OS|Full |
По умолчанию: | ServerTokens Full |
Контекст: | server config |
Статус: | Core |
Модуль: | core |
This directive controls whether Server
response
header field which is sent back to clients includes a
description of the generic OS-type of the server as well as
information about compiled-in modules.
ServerTokens Prod[uctOnly]
- Server sends (e.g.):
Server: Apache
ServerTokens Major
- Server sends (e.g.):
Server: Apache/2
ServerTokens Minor
- Server sends (e.g.):
Server: Apache/2.0
ServerTokens Min[imal]
- Server sends (e.g.):
Server: Apache/2.0.41
ServerTokens OS
- Server sends (e.g.):
Server: Apache/2.0.41 (Unix)
ServerTokens Full
(or not specified)- Server sends (e.g.):
Server: Apache/2.0.41 (Unix) PHP/4.2.2 MyMod/1.2
This setting applies to the entire server, and cannot be enabled or disabled on a virtualhost-by-virtualhost basis.
After version 2.0.44, this directive also controls the
information presented by the ServerSignature
directive.
См также
SetHandler Директива
Описание: | Forces all matching files to be processed by a handler |
---|---|
Синтаксис: | SetHandler handler-name|None |
Контекст: | server config, virtual host, directory, .htaccess |
Перекрывает: | FileInfo |
Статус: | Core |
Модуль: | core |
Совместимость: | Moved into the core in Apache 2.0 |
When placed into an .htaccess
file or a
<Directory>
or
<Location>
section, this directive forces all matching files to be parsed
through the handler given by
handler-name. For example, if you had a directory you
wanted to be parsed entirely as imagemap rule files, regardless
of extension, you might put the following into an
.htaccess
file in that directory:
SetHandler imap-file
Another example: if you wanted to have the server display a
status report whenever a URL of
http://servername/status
was called, you might put
the following into httpd.conf
:
<Location /status>
SetHandler server-status
</Location>
You can override an earlier defined SetHandler
directive by using the value None
.
См также
SetInputFilter Директива
Описание: | Sets the filters that will process client requests and POST input |
---|---|
Синтаксис: | SetInputFilter filter[;filter...] |
Контекст: | server config, virtual host, directory, .htaccess |
Перекрывает: | FileInfo |
Статус: | Core |
Модуль: | core |
The SetInputFilter
directive sets the
filter or filters which will process client requests and POST
input when they are received by the server. This is in addition to
any filters defined elsewhere, including the
AddInputFilter
directive.
If more than one filter is specified, they must be separated by semicolons in the order in which they should process the content.
См также
- Filters documentation
SetOutputFilter Директива
Описание: | Sets the filters that will process responses from the server |
---|---|
Синтаксис: | SetOutputFilter filter[;filter...] |
Контекст: | server config, virtual host, directory, .htaccess |
Перекрывает: | FileInfo |
Статус: | Core |
Модуль: | core |
The SetOutputFilter
directive sets the filters
which will process responses from the server before they are
sent to the client. This is in addition to any filters defined
elsewhere, including the
AddOutputFilter
directive.
For example, the following configuration will process all files
in the /www/data/
directory for server-side
includes.
<Directory /www/data/>
SetOutputFilter INCLUDES
</Directory>
If more than one filter is specified, they must be separated by semicolons in the order in which they should process the content.
См также
- Filters documentation
TimeOut Директива
Описание: | Amount of time the server will wait for certain events before failing a request |
---|---|
Синтаксис: | TimeOut seconds |
По умолчанию: | TimeOut 300 |
Контекст: | server config, virtual host |
Статус: | Core |
Модуль: | core |
The TimeOut
directive currently defines
the amount of time Apache will wait for three things:
- The total amount of time it takes to receive a GET request.
- The amount of time between receipt of TCP packets on a POST or PUT request.
- The amount of time between ACKs on transmissions of TCP packets in responses.
We plan on making these separately configurable at some point down the road. The timer used to default to 1200 before 1.2, but has been lowered to 300 which is still far more than necessary in most situations. It is not set any lower by default because there may still be odd places in the code where the timer is not reset when a packet is sent.
TraceEnable Директива
Описание: | Determines the behaviour on TRACE
requests |
---|---|
Синтаксис: | TraceEnable [on|off|extended] |
По умолчанию: | TraceEnable on |
Контекст: | server config |
Статус: | Core |
Модуль: | core |
Совместимость: | Available in Apache 1.3.34, 2.0.55 and later |
This directive overrides the behavior of TRACE
for both
the core server and mod_proxy
. The default
TraceEnable on
permits TRACE
requests per
RFC 2616, which disallows any request body to accompany the request.
TraceEnable off
causes the core server and
mod_proxy
to return a 405
(Method not
allowed) error to the client.
Finally, for testing and diagnostic purposes only, request
bodies may be allowed using the non-compliant TraceEnable
extended
directive. The core (as an origin server) will
restrict the request body to 64k (plus 8k for chunk headers if
Transfer-Encoding: chunked
is used). The core will
reflect the full headers and all chunk headers with the response
body. As a proxy server, the request body is not restricted to 64k.
UseCanonicalName Директива
Описание: | Configures how the server determines its own name and port |
---|---|
Синтаксис: | UseCanonicalName On|Off|DNS |
По умолчанию: | UseCanonicalName On |
Контекст: | server config, virtual host, directory |
Статус: | Core |
Модуль: | core |
In many situations Apache must construct a self-referential
URL -- that is, a URL that refers back to the same server. With
UseCanonicalName On
Apache will use the hostname and port
specified in the ServerName
directive to construct the canonical name for the server. This name
is used in all self-referential URLs, and for the values of
SERVER_NAME
and SERVER_PORT
in CGIs.
With UseCanonicalName Off
Apache will form
self-referential URLs using the hostname and port supplied by
the client if any are supplied (otherwise it will use the
canonical name, as defined above). These values are the same
that are used to implement name based virtual hosts,
and are available with the same clients. The CGI variables
SERVER_NAME
and SERVER_PORT
will be
constructed from the client supplied values as well.
An example where this may be useful is on an intranet server
where you have users connecting to the machine using short
names such as www
. You'll notice that if the users
type a shortname, and a URL which is a directory, such as
http://www/splat
, without the trailing
slash then Apache will redirect them to
http://www.domain.com/splat/
. If you have
authentication enabled, this will cause the user to have to
authenticate twice (once for www
and once again
for www.domain.com
-- see UseCanonicalName
is set Off
, then
Apache will redirect to http://www/splat/
.
There is a third option, UseCanonicalName DNS
,
which is intended for use with mass IP-based virtual hosting to
support ancient clients that do not provide a
Host:
header. With this option Apache does a
reverse DNS lookup on the server IP address that the client
connected to in order to work out self-referential URLs.
Предупреждение
If CGIs make assumptions about the values of SERVER_NAME
they may be broken by this option. The client is essentially free
to give whatever value they want as a hostname. But if the CGI is
only using SERVER_NAME
to construct self-referential URLs
then it should be just fine.
См также
<VirtualHost> Директива
Описание: | Contains directives that apply only to a specific hostname or IP address |
---|---|
Синтаксис: | <VirtualHost
addr[:port] [addr[:port]]
...> ... </VirtualHost> |
Контекст: | server config |
Статус: | Core |
Модуль: | core |
<VirtualHost>
and
</VirtualHost>
are used to enclose a group of
directives that will apply only to a particular virtual host. Any
directive that is allowed in a virtual host context may be
used. When the server receives a request for a document on a
particular virtual host, it uses the configuration directives
enclosed in the <VirtualHost>
section. Addr can be:
- The IP address of the virtual host;
- A fully qualified domain name for the IP address of the virtual host;
- The character
*
, which is used only in combination withNameVirtualHost *
to match all IP addresses; or - The string
_default_
, which is used only with IP virtual hosting to catch unmatched IP addresses.
Пример
<VirtualHost 10.1.2.3>
ServerAdmin webmaster@host.foo.com
DocumentRoot /www/docs/host.foo.com
ServerName host.foo.com
ErrorLog logs/host.foo.com-error_log
TransferLog logs/host.foo.com-access_log
</VirtualHost>
IPv6 addresses must be specified in square brackets because the optional port number could not be determined otherwise. An IPv6 example is shown below:
<VirtualHost [2001:db8::a00:20ff:fea7:ccea]>
ServerAdmin webmaster@host.example.com
DocumentRoot /www/docs/host.example.com
ServerName host.example.com
ErrorLog logs/host.example.com-error_log
TransferLog logs/host.example.com-access_log
</VirtualHost>
Each Virtual Host must correspond to a different IP address,
different port number or a different host name for the server,
in the former case the server machine must be configured to
accept IP packets for multiple addresses. (If the machine does
not have multiple network interfaces, then this can be
accomplished with the ifconfig alias
command -- if
your OS supports it).
Примечание
The use of <VirtualHost>
does
not affect what addresses Apache listens on. You
may need to ensure that Apache is listening on the correct addresses
using Listen
.
When using IP-based virtual hosting, the special name
_default_
can be specified in
which case this virtual host will match any IP address that is
not explicitly listed in another virtual host. In the absence
of any _default_
virtual host the "main" server config,
consisting of all those definitions outside any VirtualHost
section, is used when no IP-match occurs. (But note that any IP
address that matches a NameVirtualHost
directive will use neither
the "main" server config nor the _default_
virtual host.
See the name-based virtual hosting
documentation for further details.)
You can specify a :port
to change the port that is
matched. If unspecified then it defaults to the same port as the
most recent Listen
statement of the main server. You may also specify :*
to match all ports on that address. (This is recommended when used
with _default_
.)
Безопасность
See the security tips document for details on why your security could be compromised if the directory where log files are stored is writable by anyone other than the user that starts the server.
См также
- Apache Virtual Host documentation
- Issues Regarding DNS and Apache
- Setting which addresses and ports Apache uses
- How <Directory>, <Location> and <Files> sections work for an explanation of how these different sections are combined when a request is received