htmlspecialchars

(PHP 4, PHP 5)

htmlspecialchars — Преобразует специальные символы в HTML сущности

Описание

string htmlspecialchars ( string $string [, int $quote_style [, string $charset ]] )

В HTML некоторые символы имеют специальное значение и для сохранения своего значения должны быть преобразованы в HTML сущности. Эта функция возвращает строку, над которой проведены некоторые из таких преобразований. Этих преобразований достаточно для большинства задач веб-программирования. Если вам нужно преобразовать все возможные сущности, используйте htmlentities().

Эта функция полезна при отображении данных, введенных пользователем, которые могут содержать нежелательные HTML тэги, например в форуме или гостевой книге. Необязательный второй аргумент quote_style определяет режим обработки одиночных и двойных кавычек. В режиме по умолчанию, ENT_COMPAT, преобразуются двойные кавычки, одиночные остаются без изменений. В режиме ENT_QUOTES преобразуются и двойные, и одиночные кавычки. а в режиме ENT_NOQUOTES и двойные, и одиночные кавычки остаются без изменений.

Производятся следующие преобразования:

  • '&' (амперсанд) преобразуется в '&'
  • '"' (двойная кавычка) преобразуется в '"' when ENT_NOQUOTES is not set.
  • ''' (одиночная кавычка) преобразуется в ''' только в режиме ENT_QUOTES.
  • '<' (знак "меньше чем") преобразуется в '&lt;'
  • '>' (знак "больше чем") преобразуется в '&gt;'

Пример #1 Пример использования htmlspecialchars()

<?php
$new 
htmlspecialchars("<a href='test'>Test</a>"ENT_QUOTES);
echo 
$new// &lt;a href=&#039;test&#039;&gt;Test&lt;/a&gt;
?>

Обратите внимание, что функция не производит других преобразований кроме описанных выше. Для преобразования всех HTML сущностей используйте htmlentities(). Поддержка необязательного второго аргумента была добавлена в PHP 3.0.17 и PHP 4.0.3.

Необязательный третий аргумент charset определяет кодировку, используемую при преобразовании. По умолчанию используется кодировка ISO-8859-1. Поддержка этого аргумента была добавлена в PHP 4.1.0.

Начиная с PHP 4.3.0 поддерживаются следующие кодировки.

Поддерживаемые кодировки
Кодировка Псевдонимы Описание
ISO-8859-1 ISO8859-1 Западно-европейская Latin-1
ISO-8859-15 ISO8859-15 Западно-европейская Latin-9. Добавляет знак евро, французские и финские буквы к кодировке Latin-1(ISO-8859-1).
UTF-8   8-битная Unicode, совместимая с ASCII.
cp866 ibm866, 866 Кириллическая кодировка, применяемая в DOS. Поддерживается в версии 4.3.2.
cp1251 Windows-1251, win-1251, 1251 Кириллическая кодировка, применяемая в Windows. Поддерживается в версии 4.3.2.
cp1252 Windows-1252, 1252 Западно-европейская кодировка, применяемая в Windows.
KOI8-R koi8-ru, koi8r Русская кодировка. Поддерживается в версии 4.3.2.
BIG5 950 Традиционный китайский, применяется в основном на Тайване.
GB2312 936 Упрощенный китайский, стандартная национальная кодировка.
BIG5-HKSCS   Расширенная Big5, применяемая в Гонг-Конге.
Shift_JIS SJIS, 932 Японская кодировка.
EUC-JP EUCJP Японская кодировка.

Замечание: Не перечисленные выше кодировки не поддерживаются, и вместо них применяется ISO-8859-1.

См. также описание функций get_html_translation_table(), strip_tags(), htmlentities() и nl2br().

Коментарии

Actually, if you're using >= 4.0.5, this should theoretically be quicker (less overhead anyway):

$text = str_replace(array("&gt;", "&lt;", "&quot;", "&amp;"), array(">", "<", "\"", "&"), $text);
2001-06-29 06:06:10
http://php5.kiev.ua/manual/ru/function.htmlspecialchars.html
People, don't use ereg_replace for the most simple string replacing operations (replacing constant string with another).
Use str_replace.
2002-09-14 17:21:44
http://php5.kiev.ua/manual/ru/function.htmlspecialchars.html
Автор:
also see function "urlencode()", useful for passing text with ampersand and other special chars through url

(i.e. the text is encoded as if sent from form using GET method)

e.g.

<?php
echo "<a href='foo.php?text=".urlencode("foo?&bar!")."'>link</a>";
?>

produces

<a href='foo.php?text=foo%3F%26bar%21'>link</a>

and if the link is followed, the $_GET["text"] in foo.php will contain "foo?&bar!"
2007-06-16 06:21:40
http://php5.kiev.ua/manual/ru/function.htmlspecialchars.html
I was recently exploring some code when I saw this being used to make data safe for "SQL".

This function should not be used to make data SQL safe (although to prevent phishing it is perfectly good).

Here is an example of how NOT to use this function:

<?php
$username 
htmlspecialchars(trim("$_POST[username]"));

$uniqueuser $realm_db->query("SELECT `login` FROM `accounts` WHERE `login` = '$username'");
?>

(Only other check on $_POST['username'] is to make sure it isn't empty which it is after trim on a white space only name)

The problem here is that it is left to default which allows single quote marks which are used in the sql query. Turning on magic quotes might fix it but you should not rely on magic quotes, in fact you should never use it and fix the code instead. There are also problems with \ not being escaped. Even if magic quotes were used there would be the problem of allowing usernames longer than the limit and having some really weird usernames given they are to be used outside of html, this just provide a front end for registering to another system using mysql. Of course using it on the output wouldn;t cause that problem.

Another way to make something of a fix would be to use ENT_QUOTE or do:

<?php
$uniqueuser 
$realm_db->query('SELECT `login` FROM `accounts` WHERE `login` = "'.$username.'";');
?>

Eitherway none of these solutions are good practice and are not entirely unflawed. This function should simply never be used in such a fashion.

I hope this will prevent newbies using this function incorrectly (as they apparently do).
2008-04-10 14:26:33
http://php5.kiev.ua/manual/ru/function.htmlspecialchars.html
Автор:
if your goal is just to protect your page from Cross Site Scripting (XSS) attack, or just to show HTML tags on a web page (showing <body> on the page, for example), then using htmlspecialchars() is good enough and better than using htmlentities().  A minor point is htmlspecialchars() is faster than htmlentities().  A more important point is, when we use  htmlspecialchars($s) in our code, it is automatically compatible with UTF-8 string.  Otherwise, if we use htmlentities($s), and there happens to be foreign characters in the string $s in UTF-8 encoding, then htmlentities() is going to mess it up, as it modifies the byte 0x80 to 0xFF in the string to entities like &eacute;.  (unless you specifically provide a second argument and a third argument to htmlentities(), with the third argument being "UTF-8").

The reason htmlspecialchars($s) already works with UTF-8 string is that, it changes bytes that are in the range 0x00 to 0x7F to &lt; etc, while leaving bytes in the range 0x80 to 0xFF unchanged.  We may wonder whether htmlspecialchars() may accidentally change any byte in a 2 to 4 byte UTF-8 character to &lt; etc.  The answer is, it won't.  When a UTF-8 character is 2 to 4 bytes long, all the bytes in this character is in the 0x80 to 0xFF range. None can be in the 0x00 to 0x7F range.  When a UTF-8 character is 1 byte long, it is just the same as ASCII, which is 7 bit, from 0x00 to 0x7F.  As a result, when a UTF-8 character is 1 byte long, htmlspecialchars($s) will do its job, and when the UTF-8 character is 2 to 4 bytes long, htmlspecialchars($s) will just pass those bytes unchanged.  So htmlspecialchars($s) will do the same job no matter whether $s is in ASCII, ISO-8859-1 (Latin-1), or UTF-8.
2008-10-08 21:45:17
http://php5.kiev.ua/manual/ru/function.htmlspecialchars.html
Автор:
Just a few notes on how one can use htmlspecialchars() and htmlentities() to filter user input on forms for later display and/or database storage... 

1. Use htmlspecialchars() to filter text input values for html input tags.  i.e.,

echo '<input name=userdata type=text value="'.htmlspecialchars($data).'" />';

 
2. Use htmlentities() to filter the same data values for most other kinds of html tags, i.e.,

echo '<p>'.htmlentities($data).'</p>';

3. Use your database escape string function to filter the data for database updates & insertions, for instance, using postgresql, 

pg_query($connection,"UPDATE datatable SET datavalue='".pg_escape_string($data)."'");
 

This strategy seems to work well and consistently, without restricting anything the user might like to type and display, while still providing a good deal of protection against a wide variety of html and database escape sequence injections, which might otherwise be introduced through deliberate and/or accidental input of such character sequences by users submitting their input data via html forms.
2009-09-17 00:43:26
http://php5.kiev.ua/manual/ru/function.htmlspecialchars.html
Автор:
This may seem obvious, but it caused me some frustration. If you try and use htmlspecialchars with the $charset argument set and the string you run it on is not actually the same charset you specify, you get any empty string returned without any notice/warning/error.

<?php

$ok_utf8 
"A valid UTF-8 string";
$bad_utf8 "An invalid UTF-8 string";

var_dump(htmlspecialchars($bad_utf8ENT_NOQUOTES'UTF-8'));  // string(0) ""

var_dump(htmlspecialchars($ok_utf8ENT_NOQUOTES'UTF-8'));  // string(20) "A valid UTF-8 string"

?>

So make sure your charsets are consistent

<?php

$bad_utf8 
"An invalid UTF-8 string";

// make sure it's really UTF-8
$bad_utf8 mb_convert_encoding($bad_utf8'UTF-8'mb_detect_encoding($bad_utf8));

var_dump(htmlspecialchars($bad_utf8ENT_NOQUOTES'UTF-8'));  // string(23) "An invalid UTF-8 string" 

?>

I had this problem because a Mac user was submitting posts copy/pasted from a program and it contained weird chars in it.
2009-09-18 13:16:01
http://php5.kiev.ua/manual/ru/function.htmlspecialchars.html
I had problems with spanish special characters. So i think in using htmlspecialchars but my strings also contain HTML.
So I used this :) Hope it help

<?php
function htmlspanishchars($str
{
    return 
str_replace(array("&lt;""&gt;"), array("<"">"), htmlspecialchars($strENT_NOQUOTES"UTF-8"));
}
?>
2010-07-01 08:57:41
http://php5.kiev.ua/manual/ru/function.htmlspecialchars.html
i searched for a while for a script, that could see the difference between an html tag and just < and > placed in the text, 
the reason is that i recieve text from a database,
wich is inserted by an html form, and contains text and html tags, 
the text can contain < and >, so does the tags,
with htmlspecialchars you can validate your text to XHTML,
but you'll also change the tags, like <b> to &lt;b&gt;,
so i needed a script that could see the difference between those two...
but i couldn't find one so i made my own one, 
i havent fully tested it, but the parts i tested worked perfect!
just for people that were searching for something like this,
it may looks big, could be done easier, but it works for me, so im happy.

<?php
function fixtags($text){
$text htmlspecialchars($text);
$text preg_replace("/=/""=\"\""$text);
$text preg_replace("/&quot;/""&quot;\""$text);
$tags "/&lt;(\/|)(\w*)(\ |)(\w*)([\\\=]*)(?|(\")\"&quot;\"|)(?|(.*)?&quot;(\")|)([\ ]?)(\/|)&gt;/i";
$replacement "<$1$2$3$4$5$6$7$8$9$10>";
$text preg_replace($tags$replacement$text);
$text preg_replace("/=\"\"/""="$text);
return 
$text;
}
?>

an example:

<?php
$string 
"
this is smaller < than this<br /> 
this is greater > than this<br />
this is the same = as this<br />
<a href=\"http://www.example.com/example.php?test=test\">This is a link</a><br />
<b>Bold</b> <i>italic</i> etc..."
;
echo 
fixtags($string);
?>

will echo:
this is smaller &lt; than this<br /> 
this is greater &gt; than this<br /> 
this is the same = as this<br /> 
<a href="http://www.example.com/example.php?test=test">This is a link</a><br /> 
<b>Bold</b> <i>italic</i> etc...

I hope its helpfull!!
2010-12-28 12:05:34
http://php5.kiev.ua/manual/ru/function.htmlspecialchars.html
Be careful, the "charset" argument IS case sensitive. This is counter-intuitive and serves no practical purpose because the HTML spec actually has the opposite.
2011-06-15 04:30:07
http://php5.kiev.ua/manual/ru/function.htmlspecialchars.html
Автор:
Unfortunately, as far as I can tell, the PHP devs did not provide ANY way to set the default encoding used by htmlspecialchars() or htmlentities(), even though they changed the default encoding in PHP 5.4 (*golf clap for PHP devs*). To save someone the time of trying it, this does not work:

<?php
ini_set
('default_charset'$charset); // doesn't work.
?>

Unfortunately, the only way to not have to explicitly provide the second and third parameter every single time this function is called (which gets extremely tedious) is to write your own function as a wrapper:

<?php
define
('CHARSET''ISO-8859-1');
define('REPLACE_FLAGS'ENT_COMPAT ENT_XHTML);

function 
html($string) {
    return 
htmlspecialchars($stringREPLACE_FLAGSCHARSET);
}

echo 
html("ñ"); // works
?>

You can do the same for htmlentities()
2013-03-14 02:46:49
http://php5.kiev.ua/manual/ru/function.htmlspecialchars.html
Problem

In many PHP legacy products the function htmlspecialchars($string) is used to convert characters like < and > and quotes a.s.o to HTML-entities. That avoids the interpretation of HTML Tags and asymmetric quote situations.

Since PHP 5.4 for $string in htmlspecialchars($string) utf8 characters are expected if no charset is defined explicitly as third parameter in the function. Legacy products are mostly in Latin1 (alias iso-8859-1) what makes the functions htmlspecialchars(), htmlentites() and html_entity_decode() to return empty strings if a special character, e. g. a German Umlaut, is present in $string:

PHP<5.4

echo htmlspecialchars('<b>Woermann</b>') //Output: &lt;b&gt;Woermann&lt;b&gt;
echo htmlspecialchars('Wörmann') //Output: &lt;b&gt;Wörmann&lt;b&gt;

PHP=5.4

echo htmlspecialchars('<b>Woermann</b>') //Output: &lt;b&gt;Woermann&lt;b&gt;
echo htmlspecialchars('<b>Wörmann</b>') //Output: empty

Three alternative solutions

a) Not runnig legacy products on PHP 5.4
b) Change all find spots in your code from 
htmlspecialchars($string) and *** to 
htmlspecialchars($string, ENT_COMPAT | ENT_HTML401, 'ISO-8859-1')
c) Replace all htmlspecialchars() and *** with a new self-made function

*** The same is true for htmlentities() and html_entity_decode();

Solution c

1 Make Search and Replace in the concerned legacy project:
Search for:        htmlspecialchars
Replace with:   htmlXspecialchars
Search for:        htmlentities
Replace with:   htmlXentities
Search for:        html_entity_decode
Replace with:   htmlX_entity_decode
2a Copy and paste the following three functions into an existing already everywhere included PHP-file in your legacy project. (of course that PHP-file must be included only once per request, otherwise you will get a Redeclare Function Fatal Error).

function htmlXspecialchars($string, $ent=ENT_COMPAT, $charset='ISO-8859-1') {
return htmlspecialchars($string, $ent, $charset);
}

function htmlXentities($string, $ent=ENT_COMPAT, $charset='ISO-8859-1') {
return htmlentities($string, $ent, $charset);
}

function htmlX_entity_decode($string, $ent=ENT_COMPAT, $charset='ISO-8859-1') {
return html_entity_decode($string, $ent, $charset);
}

or 2b crate a new PHP-file containing the three functions mentioned above, let's say, z. B. htmlXfunctions.inc.php and include it on the first line of every PHP-file in your legacy product like this: require_once('htmlXfunctions.inc.php').
2013-05-19 16:06:00
http://php5.kiev.ua/manual/ru/function.htmlspecialchars.html
Автор:
As of PHP 5.4 they changed default encoding from "ISO-8859-1" to "UTF-8". So if you get null from htmlspecialchars or htmlentities

where you have only set 
<?php
echo htmlspecialchars($string);
echo 
htmlentities($string);
?>

you can fix it by
<?php
echo htmlspecialchars($stringENT_COMPAT,'ISO-8859-1'true);
echo 
htmlentities($stringENT_COMPAT,'ISO-8859-1'true);
?> 

On linux you can find the scripts you need to fix by

grep -Rl "htmlspecialchars\\|htmlentities" /path/to/php/scripts/
2013-06-20 14:59:59
http://php5.kiev.ua/manual/ru/function.htmlspecialchars.html
Автор:
Another thing important to mention is that
htmlspecialchars(NULL)
returnes an empty string and not NULL!
2014-01-10 01:00:14
http://php5.kiev.ua/manual/ru/function.htmlspecialchars.html
Автор:
Be aware of the encoding of your source files!!! 

Some of the suggestions here make reference to workarounds where you hard-code an encoding.

<?php
 
echo htmlspecialchars('<b>Wörmann</b>');  // Why isn't this working?
?>

As it turns out, it may actually be your text editor that is to blame.

As of PHP 5.4, htmlspecialchars now defaults to the UTF-8 encoding. That said, many text editors default to non-UTF encodings like ISO-8859-1 (i.e. Latin-1) or WIN-1252. If you change the encoding of the file to UTF-8, the code above will now work (i.e. the ö is encoded differently in UTF-8 and ISO-8859-1, and you need the UTF-8 version).

Make sure you are editing in UTF-8 Unicode mode! Check your UI or manual for how to convert files to Unicode. It's also a good idea to figure out where to look in your UI to see what the current file encoding is.
2015-05-18 02:59:37
http://php5.kiev.ua/manual/ru/function.htmlspecialchars.html
If you use htmlspecialchars() to escape any HTML attribute, make sure use double quote instead of single quote for the attribute.

For Example, 

> Wrap with Single Quote
<?php
echo "<p title='"  htmlspecialchars("Hello\"s\'world") . "'"

// title will end up Hello"s\ and rest of the text after single quote will be cut off. 
?>

> Wrap with Double quote :
<?php
echo '<p title="'  htmlspecialchars("Hello\"s\'world") . '"'

// title will show up correctly as Hello"s'world
?>
2019-07-22 20:11:54
http://php5.kiev.ua/manual/ru/function.htmlspecialchars.html
One MUST specify ENT_HTML5 in addition to double_encode=false to avoid double-encoding.

The reason is that contrary to the documentation, double_encode=false will NOT unconditionally and globally prevent double-encoding of ALL existing entities. Crucially, it will only skip double-encoding for THOSE character entities that are explicitly valid for the document type chosen!

Since ENT_HTML5 references the most expansive list of character entities, it is the only setting that will be most lenient with existing character entities.

<?php
declare(strict_types=1);
$text 'ampersand(&amp;), double quote(&quot;), single quote(&apos;), less than(&lt;), greater than(&gt;), numeric entities(&#x26;&#x22;&#x27;&#x3C;&#x3E;), HTML 5 entities(&plus;&comma;&excl;&dollar;&lpar;&ncedil;&euro;)';
$result3 htmlspecialchars$textENT_NOQUOTES ENT_SUBSTITUTE'UTF-8'/*double_encode*/false );
$result4 htmlspecialchars$textENT_NOQUOTES ENT_XML1 ENT_SUBSTITUTE'UTF-8'/*double_encode*/false );
$result5 htmlspecialchars$textENT_NOQUOTES ENT_XHTML ENT_SUBSTITUTE'UTF-8'/*double_encode*/false );
$result6 htmlspecialchars$textENT_NOQUOTES ENT_HTML5 ENT_SUBSTITUTE'UTF-8'/*double_encode*/false );

echo 
"<br />\r\nHTML 4.01:<br />\r\n"$result3
   
"<br />\r\nXML 1:<br />\r\n"$result4
   
"<br />\r\nXHTML:<br />\r\n"$result5
   
"<br />\r\nHTML 5:<br />\r\n"$result6"<br />\r\n";
?>

will produce:

HTML 4.01 (will NOT recognize single quote, but Euro):
ampersand(&), double quote("), single quote(&apos;), less than(<), greater than(>), numeric entities(&"'<>), HTML 5 entities(&plus;&comma;&excl;&dollar;&lpar;&ncedil;€)

XML 1 (WILL recognize single quote, but NOT Euro):
ampersand(&), double quote("), single quote('), less than(<), greater than(>), numeric entities(&"'<>), HTML 5 entities(&plus;&comma;&excl;&dollar;&lpar;&ncedil;&euro;)

XHTML (recognizes single quote and Euro):
ampersand(&), double quote("), single quote('), less than(<), greater than(>), numeric entities(&"'<>), HTML 5 entities(&plus;&comma;&excl;&dollar;&lpar;&ncedil;€)

HTML 5 (recognizes "all" valid character entities):
ampersand(&), double quote("), single quote('), less than(<), greater than(>), numeric entities(&"'<>), HTML 5 entities(+,!$(ņ€)
2021-04-02 23:48:37
http://php5.kiev.ua/manual/ru/function.htmlspecialchars.html
Автор:
Thanks Thomasvdbulk for your workaround, I would like to add a precision:

When the HTML contains a link tag without new line before the script doesn't work :/

Your example:

<?php
$string 
"
this is smaller < than this<br />
this is greater > than this<br />
this is the same = as this<br />
<a href=\"http://www.example.com/example.php?test=test\">This is a link</a><br />
<b>Bold</b> <i>italic</i> etc..."
;
echo 
fixtags($string);
?>

Works but this doesn't work:

<?php
$string 
"
this is smaller < than this<br />
this is greater > than this<br />
this is the same = as this<br /><a href=\"http://www.example.com/example.php?test=test\">This is a link</a><br />
<b>Bold</b> <i>italic</i> etc..."
;
echo 
fixtags($string);
?>

So I add a little workaround at the beginning (before htmlspecialchars):

<?php
$text 
preg_replace('/<a/'"\r\n<a"$text);
?>

I don't like that but I don't find other solution... :/
2022-03-16 12:33:08
http://php5.kiev.ua/manual/ru/function.htmlspecialchars.html
Автор:
Because the documentation says

int $flags = ENT_QUOTES | ENT_SUBSTITUTE | ENT_HTML401

you would think that ENT_HTML401 is important. But as the notes mention, ENT_HTML401 is the default if you don't specify the doc type. This is because ENT_HTML401 === 0. So

int $flags = ENT_QUOTES | ENT_SUBSTITUTE | ENT_HTML401

is exactly equivalent to

int $flags = ENT_QUOTES | ENT_SUBSTITUTE
2022-07-06 14:16:45
http://php5.kiev.ua/manual/ru/function.htmlspecialchars.html

    Поддержать сайт на родительском проекте КГБ