array_flip

(PHP 4, PHP 5)

array_flipМеняет местами ключи с их значениями в массиве

Описание

array array_flip ( array $trans )

Функция array_flip() возвращает array наоборот, то есть ключи массива trans становятся значениями, а значения массива trans становятся ключами.

Обратите внимание, что значения массива trans должны быть корректными ключами, то есть они должны иметь тип integer или string. Если значение имеет неверный тип, будет выдано предупреждение и данная пара ключ/значение не будет включена в результат.

Если значение встречается несколько раз, для обработки будет использоваться последний встреченный ключ, а все остальные будут потеряны.

Список параметров

trans

Массив переворачиваемых пар ключ/значение.

Возвращаемые значения

Возвращает перевернутый массив в случае успеха, или NULL в случае ошибки.

Примеры

Пример #1 Пример использования array_flip()

<?php
$trans 
array_flip($trans);
$original strtr($str$trans);
?>

Пример #2 Пример использования array_flip() с коллизиями

<?php
$trans 
= array("a" => 1"b" => 1"c" => 2);
$trans array_flip($trans);
print_r($trans);
?>

теперь $trans содержит:

Array
(
    [1] => b
    [2] => c
)

Смотрите также

  • array_values() - Выбирает все значения массива
  • array_keys() - Возвращает все или некоторое подмножество ключей массива
  • array_reverse() - Возвращает массив с элементами в обратном порядке

Коментарии

I know a lot of people want a function to remove a key by value from an array. I saw solutions that iterate(!) though the whole array comparing value by value and then unsetting that value's key. PHP has a built-in function for pretty much everything (heard it will even cook you breakfast), so if you think "wouldn't it be cool if PHP had a function to do that...", odds are it already has. Check out this example. It takes a value, gets all keys for that value if it has duplicates, unsets them all, and returns a reindexed array.

<?php
$arr 
= array(11,12,13,12);        // sample array
$arr array_flip($arr);
unset(
$arr[12]);
$arr = array(array_keys($arr));
?>

$arr contains:

Array
(
    [0] => Array
        (
            [0] => 11
            [1] => 13
        )
?>

)
2003-08-05 17:42:06
http://php5.kiev.ua/manual/ru/function.array-flip.html
When you do array_flip, it takes the last key accurence for each value, but be aware that keys order in flipped array will be in the order, values were first seen in original array. For example, array:

    [1] => 1
    [2] => 2
    [3] => 3
    [4] => 3
    [5] => 2
    [6] => 1
    [7] => 1
    [8] => 3
    [9] => 3

After flipping will become:
(first seen value -> first key)

    [1] => 7
    [2] => 5
    [3] => 9

And not anything like this:
(last seen value -> last key)

    [2] => 5
    [1] => 7
    [3] => 9

In my application I needed to find five most recently commented entries. I had a sorted comment-id => entry-id array, and what popped in my mind is just do array_flip($array), and I thought I now would have last five entries in the array as most recently commented entry => comment pairs. In fact it wasn't (see above, as it is the order of values used). To achieve what I need I came up with the following (in case someone will need to do something like that):

First, we need a way to flip an array, taking the first encountered key for each of values in array. You can do it with:

  $array = array_flip(array_unique($array));

Well, and to achieve that "last comments" effect, just do:

  $array = array_reverse($array, true);
  $array = array_flip(array_unique($array));
  $array = array_reverse($array, true);

In the example from the very beginning array will become:

    [2] => 5
    [1] => 7
    [3] => 9

Just what I (and maybe you?) need. =^_^=
2004-11-23 13:21:22
http://php5.kiev.ua/manual/ru/function.array-flip.html
In case anyone is wondering how array_flip() treats empty arrays:

<?php
print_r
(array_flip(array()));
?>

results in:

Array
(
)

I wanted to know if it would return false and/or even chuck out an error if there were no key-value pairs to flip, despite being non-intuitive if that were the case. But (of course) everything works as expected. Just a head's up for the paranoid.
2007-04-26 04:37:13
http://php5.kiev.ua/manual/ru/function.array-flip.html
<?php
/*
    Fun function to return the longest physical *value* from an array.

    Culled from a small script designed to capture the longest $_POST variable, 
    usually the textarea, which would then be dumped to a "emergency post dump file".

    corz at corz dot org
*/

$array = array("input" => "submit""textarea" => "Some long spiel of text\r\na textarea, probably"
                       
"another-input" => "make me longer""and" => "another""etc" => "etc.");

echo 
'<!DOCTYPE HTML SYSTEM><html><head><title>long</title></head><body><pre>Longest value: ',
                                           
get_longest_value($array),'</pre></body></html>';

function 
get_longest_value($array) {
    foreach (
$array as $key => $value) {
       
$lengths[$key] = strlen($value); 
    }
   
asort($lengths);
   
$lengths array_flip($lengths);
   
$longest str_replace("\r\n""\n"$array[array_pop($lengths)]);
    if (
get_magic_quotes_gpc()) { return stripslashes($longest); }
    return 
$longest;
}
?>
2008-12-08 03:36:37
http://php5.kiev.ua/manual/ru/function.array-flip.html
From an algorithmic efficiency standpoint, building an entire array of lengths to then sort to only retrieve the longest value is unnecessary work.  The following should be O(n) instead of O(n log n).  It could also be:

<?php
function get_longest_value($array) {
   
// Some don't like to initialize, I do
   
$longest NULL;
   
$longestLen = -1;
    foreach (
$array $value) {
       
$len strlen($value);
        if(
$len>$longestLen) {
           
$longest $value;
           
$longestLen $len;
        }
    }
   
$longest str_replace("\r\n""\n"$longest);
    if (
get_magic_quotes_gpc()) { return stripslashes($longest); }
    return 
$longest;
}
?>
2009-03-07 14:48:42
http://php5.kiev.ua/manual/ru/function.array-flip.html
Автор:
Finding the longest string in an array?

<?php
function longest_string_in_array($array)
{
   
$mapping array_combine($arrayarray_map('strlen'$array));
    return 
array_keys($mappingmax($mapping));
}
?>

Differences are obvious: returns an array of [i]all[/i] of the longest strings, instead of just picking one arbitrarily. Doesn't do the stripslashing or magic stuff because that's another job for for another function.
2009-03-20 04:22:10
http://php5.kiev.ua/manual/ru/function.array-flip.html
Автор:
this function can be used to remove null elements form an array:

<?php
$ar 
= array(null,'1','2',null,'3',null);
print_r($ar);
/*
result:
Array
(
    [0] => 
    [1] => 1
    [2] => 2
    [3] => 
    [4] => 3
    [5] => 
)
*/

print_r(array_flip(array_flip($ar)));
/*
result:
Array
(
    [1] => 1
    [2] => 2
    [4] => 3
)
*/
?>
2010-09-12 16:11:49
http://php5.kiev.ua/manual/ru/function.array-flip.html
Автор:
I find this function vey useful when you have a big array and you want to know if a given value is in the array. in_array in fact becomes quite slow in such a case, but you can flip the big array and then use isset to obtain the same result in a much faster way.
2011-12-16 06:16:45
http://php5.kiev.ua/manual/ru/function.array-flip.html
I needed a way to flip a multidimensional array and came up with this function to accomplish the task.  I hope it helps someone else.

<?php
function multi_array_flip($arrayIn$DesiredKey$DesiredKey2=false$OrigKeyName=false) { 
$ArrayOut=array();
foreach (
$arrayIn as $Key=>$Value
    {
       
// If there is an original key that need to be preserved as data in the new array then do that if requested ($OrigKeyName=true)
       
if ($OrigKeyName$Value[$OrigKeyName]=$Key;
       
// Require a string value in the data part of the array that is keyed to $DesiredKey
       
if (!is_string($Value[$DesiredKey])) return false;

       
// If $DesiredKey2 was specified then assume a multidimensional array is desired and build it
       
if (is_string($DesiredKey2)) 
        {
           
// Require a string value in the data part of the array that is keyed to $DesiredKey2
           
if (!is_string($Value[$DesiredKey2])) return false;

           
// Build NEW multidimensional array
           
$ArrayOut[$Value[$DesiredKey]][$Value[$DesiredKey2]]=$Value;
        }

           
// Build NEW single dimention array
       
else $ArrayOut[$Value[$DesiredKey]][]=$Value;
    }
return 
$ArrayOut;
}
//end multi_array_flip
?>
2012-01-06 12:23:09
http://php5.kiev.ua/manual/ru/function.array-flip.html
Автор:
Similarly, if you want the last value without affecting the pointer, you can do:

<?php

$array 
= array("one","two","three");

echo 
next($array); // "two"

$last array_pop(array_keys(array_flip($array)));

echo 
$last// "three"

echo current($array); // "two"

?>
2012-04-05 13:17:10
http://php5.kiev.ua/manual/ru/function.array-flip.html
Автор:
This function is useful when parsing a CSV file with a heading column, but the columns might vary in order or presence:

<?php

$f 
fopen("file.csv""r");

/* Take the first line (the header) into an array, then flip it
so that the keys are the column name, and values are the
column index. */
$cols array_flip(fgetcsv($f));

while (
$line fgetcsv($f))
{
   
// Now we can reference CSV columns like so:
   
$status $line[$cols['OrderStatus']];
}

?>

I find this better than referencing the numerical array index.
2013-04-29 17:59:35
http://php5.kiev.ua/manual/ru/function.array-flip.html
<?php
function array_flip_into_subarray($input){
$output = array();
foreach (
$input as $key=>$values){
    foreach (
$values as $value){
       
$output[$value][] = $key;
    }
}
return 
$output;
}
2014-02-25 02:06:43
http://php5.kiev.ua/manual/ru/function.array-flip.html
Автор:
array_flip() does not retain the data type of values, when converting them into keys. :( 

<?php                                                                                                                                                                                                           
$arr 
= array('one' => '1''two' => '2''three' => '3');
var_dump($arr);
$arr2 array_flip($arr);
var_dump($arr2);
?>

This code outputs this:
array(3) {
  ["one"]=>
  string(1) "1"
  ["two"]=>
  string(1) "2"
  ["three"]=>
  string(1) "3"
}
array(3) {
  [1]=>
  string(3) "one"
  [2]=>
  string(3) "two"
  [3]=>
  string(5) "three"
}

It is valid expectation that string values "1", "2" and "3" would become string keys "1", "2" and "3".
2015-01-27 08:48:22
http://php5.kiev.ua/manual/ru/function.array-flip.html
note :: array_flip is a changer for key and value and a auto unique like array_unique :

<?php
/*
sabastore
 */
$intArray1 = array(-4,1,1,3);
print_r($intArray1);
$intArray1 array_flip($intArray1);
print_r($intArray1);
?>
2016-04-27 23:57:36
http://php5.kiev.ua/manual/ru/function.array-flip.html
Автор:
array_flip will remove duplicate values in the original array when you flip either an associative or numeric array. As you might expect it's the earlier of two duplicates that is lost:

<?php
    $a 
= array('one''two''one'); 
   
print_r($a); 

   
$b array_flip($a); 
   
print_r($b);
?>

Result:

array(3) {
  [0]  => string(3) "one"
  [1]  =>  string(3) "two"
  [2]  =>  string(3) "one"
}

array(2) {
  'one' => int(2)
  'two' => int(1)
}

This may be good or bad, depending on what you want, but no error is thrown.
2017-03-03 06:22:44
http://php5.kiev.ua/manual/ru/function.array-flip.html
Автор:
Don't use this function for filtering or searching an array - PHP already has functions for exactly those purposes. If nothing else, array_flip will trash the array's elements if they're anything other than integers or non-decimal-integer strings.
2017-10-30 05:19:21
http://php5.kiev.ua/manual/ru/function.array-flip.html
Автор:
Notice : array_flip can turn string into integer
2018-10-08 06:27:07
http://php5.kiev.ua/manual/ru/function.array-flip.html
Автор:
<?php

$arr 
= array('one' => ['four' => 4], 'two' => '2''three' => '3');
var_dump($arr);

$arr2 array_flip($arr);
var_dump($arr2);

?>

The above example will output:

array(3) {
  ["one"]=>
  array(1) {
    ["four"]=>
    int(4)
  }
  ["two"]=>
  string(1) "2"
  ["three"]=>
  string(1) "3"
}

Warning: array_flip(): Can only flip STRING and INTEGER values! in /root/test.php on line 4
array(2) {
  [2]=>
  string(3) "two"
  [3]=>
  string(5) "three"
}
2018-10-11 21:03:22
http://php5.kiev.ua/manual/ru/function.array-flip.html
If you don't want to lose duplicates, and you're ok, with having the values in the flipped array in an array as well, you may use this:

PHP 7.4 - ^8

<?php

function array_flip_safe(array $array) : array
{
    return 
array_reduce(array_keys($array), function ($carry$key) use (&$array) {
       
$carry[$array[$key]] ??= [];
       
$carry[$array[$key]][] = $key;
        return 
$carry;
    }, []);
}

?>

PHP 7.0 - ^7.3 (Time to upgrade to PHP 8 ^^)

<?php

function array_flip_safe(array $array) : array
{
    return 
array_reduce(array_keys($array), function ($carry$key) use (&$array) {
       
$carry[$array[$key]] = $carry[$array[$key]] ?? [];
       
$carry[$array[$key]][] = $key;
        return 
$carry;
    }, []);
}

?>

PHP 5.4 - ^5.6 (Just don't)

<?php

function array_flip_safe(array $array)
{
    return 
array_reduce(array_keys($array), function ($carry$key) use (&$array) {
        if (!isset(
$carry[$array[$key]])
               
$carry[$array[$key]] = [];
       
$carry[$array[$key]][] = $key;
        return 
$carry;
    }, []);
}

?>
2021-10-21 16:05:04
http://php5.kiev.ua/manual/ru/function.array-flip.html

    Поддержать сайт на родительском проекте КГБ