ssh2_shell
(PECL ssh2 >= 0.9.0)
ssh2_shell — Request an interactive shell
Описание
resource ssh2_shell
( resource
$session
[, string $term_type = "vanilla"
[, array $env
[, int $width = 80
[, int $height = 25
[, int $width_height_type = SSH2_TERM_UNIT_CHARS
]]]]] )Open a shell at the remote end and allocate a stream for it.
Список параметров
-
session -
An SSH connection link identifier, obtained from a call to ssh2_connect().
-
term_type -
term_typeshould correspond to one of the entries in the target system's /etc/termcap file. -
env -
envmay be passed as an associative array of name/value pairs to set in the target environment. -
width -
Width of the virtual terminal.
-
height -
Height of the virtual terminal.
-
width_height_type -
width_height_typeshould be one ofSSH2_TERM_UNIT_CHARSorSSH2_TERM_UNIT_PIXELS.
Возвращаемые значения
Примеры
Пример #1 Executing a command
<?php
$connection = ssh2_connect('shell.example.com', 22);
ssh2_auth_password($connection, 'username', 'password');
$stream = ssh2_shell($connection, 'vt102', null, 80, 24, SSH2_TERM_UNIT_CHARS);
?>
Смотрите также
- ssh2_exec() - Execute a command on a remote server
- ssh2_tunnel() - Open a tunnel through a remote server
- ssh2_fetch_stream() - Fetch an extended data stream
- ssh2_auth_agent
- ssh2_auth_hostbased_file
- ssh2_auth_none
- ssh2_auth_password
- ssh2_auth_pubkey_file
- ssh2_connect
- ssh2_exec
- ssh2_fetch_stream
- ssh2_fingerprint
- ssh2_methods_negotiated
- ssh2_publickey_add
- ssh2_publickey_init
- ssh2_publickey_list
- ssh2_publickey_remove
- ssh2_scp_recv
- ssh2_scp_send
- ssh2_sftp_chmod
- ssh2_sftp_lstat
- ssh2_sftp_mkdir
- ssh2_sftp_readlink
- ssh2_sftp_realpath
- ssh2_sftp_rename
- ssh2_sftp_rmdir
- ssh2_sftp_stat
- ssh2_sftp_symlink
- ssh2_sftp_unlink
- ssh2_sftp
- ssh2_shell
- ssh2_tunnel
Коментарии
Using ssh_exec, one could execute only one command at a time. However, ssh_shell, offers greater flexibility.
Here is an example:
<?php
$con=ssh2_connect('192.168.0.1', 22);
ssh2_auth_password($con, "user", "password");
$shell=ssh2_shell($con, 'xterm');
fwrite( $shell, "cd /dir_one\n");
fwrite( $shell, "ls -la\n");
fwrite( $shell, "cd /dir_two\n");
fwrite( $shell, "ls -la\n");
?>
Thanks Sara for your implementation and your help !
// Connection to SSH server
echo "Connexion SSH ";
if (!($resource=@ssh2_connect("192.168.0.1"))) {
echo "[FAILED]<br />";
exit(1);
}
echo "[OK]<br />";
// Authentification by login/passwd
echo "Authentification ";
if (!@ssh2_auth_password($resource,"root","your_password")) {
echo "[FAILED]<br />";
exit(1);
}
echo "[OK]<br />";
// We need a shell
echo "Shell stdio ";
if (!($stdio = @ssh2_shell($resource,"xterm"))) {
echo "[FAILED]<br />";
exit(1);
}
echo "[OK]<br />";
// Execution of any command
// Be careful to add an '\n' at the end of the command
$command = "/bin/ls /tmp\n";
fwrite($stdio,$command);
// IMPORTANT
// For some obscur reasons, just after ur command, u need to make a sleep to be sure, that the command has reached the server and is running
sleep(1);
// Then u can fetch the stream to see what happens on stdio
while($line = fgets($stdio)) {
flush();
echo $line."<br />";
}
// It's always cleaner to close all stream
fclose($stdio);
I truly hope i'll help someone :)
In response to webmaster at spectreanime dot com:
"For some obscur reasons, just after ur command, u need to make a sleep to be sure, that the command has reached the server and is running"
Actually what you must do is set the blocking of the string to true, so it waits until the server sends data to the STDOUT before echoing it.
So, instead of:
sleep(1);
Just do:
stream_set_blocking($stdio, true);
Best regards,
Hi,
we could also use shell_exec to execute multiple related commands
separated by semicolon (;).
And I figured out problem that sometimes arise related to the execution of complex java c/c++ programs. All we need to do is to set the required environment variables. I have a environment variable in .bash_profile. This variable would be set when I log into my account normally through shell. But when we use ssh2_connect(), the environment variables in the .bash_profile are not set, all we need to do is export the required environment variables with shell_exec();
example:
$conn = ssh2_connect($ipaddress);
ssh2_auth_password($conn,$username,$passwd);
$cmd1="/path/to/program1";
$cmd2="/path/to/program2";
$env1="export Variable_name1=path1";
$env2="export Variable_name2=path2"
$stream = ssh2_exec($connection,"$env1; $env2; $cmd1; $cmd2");//this would execute all the //commands and return
// stream
stream_set_blocking($stream, true);
while($o=fgets($stream)){
echo $o.'<br>';
}
...
...
Thanks,
Vikram Gopu .
http:\\my.lsu.edu/vgopu1
To run a shell script with all the variables that you would have when logged in interactively add bash -l or sh --login infront of your command. The script I use creates a shell script, copies the script to the box with ssh2_scp_send, then executes the script with ssh2_exec. Hope this helps somebody.
<?php
//Example
$script1 = "bash -l /etc/rc.d/rc.httpd restart";
$connection = ssh2_connect('shell.example.com', 22);
ssh2_auth_password($connection, 'username', 'password');
$stream = ssh2_exec($connection, $script1);
?>
Do not use \n to end the command. Some server will fail to process. Use always the standard for PHP end of line: PHP_EOL
'suri at suribala dot com"'s example should be modified as follows (also change the double quotes to single, for better performance):
<?php
$con=ssh2_connect('192.168.0.1', 22);
ssh2_auth_password($con, 'user', 'password');
$shell=ssh2_shell($con, 'xterm');
fwrite( $shell, 'cd /dir_one;'.PHP_EOL);
fwrite( $shell, 'ls -la;'.PHP_EOL);
fwrite( $shell, 'cd /dir_two;'.PHP_EOL);
fwrite( $shell, 'ls -la;'.PHP_EOL);
?>
Cheers,
Pimmy
In my case the ssh2_shell doesn't work every time. There were many problems:- If I use stream_get_contents, the command(s) never executed
- with while ($buf = fgets...) the loop never stops
- without sleep(1) before stream_set_blocking, the command wasn't execute every time. Anyone knows why?
That's what I made, and it works - but I think it isn't what it should be:
<?php
$strCommand = 'tar -C /path/to/extract -xjf /path/from/file.tar.bz2';
$sshStream = ssh2_shell($this->sshSession, 'xterm', null, 120, 24, SSH2_TERM_UNIT_CHARS);
fwrite($sshStream, $strCommand . PHP_EOL);
sleep(1);
stream_set_blocking($sshStream, true);
$sshUntarRetval = "";
while ($buf = fgets($sshStream,4096)) {
flush();
$sshUntarRetval .= $buf;
if (strpos($buf, 'tar -C') !== false)
{
break;
}
}
fclose($sshStream);
?>
Keep in mind that when using ssh2_shell, the remote system's EOL may not be the same as PHP's EOL, so it may not be safe to use PHP_EOL. The native EOL for Windows is \r\n, while Unix is typically merely \n, and classic Mac for some reason is \r.
If you're running PHP on Windows (\r\n) and sshing into a Unix box (\n) you're going to end up sending extra lines. My experience so far is that it just acts as though you typed nothing, which may cause issues with password prompts.
Oh, and \n\r? Don't do that. Nobody does that.
I get it a work script for multiple commands. This script return output of each command on array, indexed by the "command".
Att: ssh2_cmd() dont work for multiple commands, thus ssh2_shell(). Attencion for de EOL on witch type of SO. I used "\n" at the end of witch command, but maybe other options like "<br>, ; , etc);
$connection = ssh2_connect($input_host_ip, 22);
if (false === $connection) {
error_log("ERROR função SSH_UMTELECOM: Connection failed!\n",3,$log_file);
exit();
}else{
if($debugar){error_log("SSH_UMTELECOM: Connection success to $input_host_ip!\n",3,$log_file);}
$auth = @ssh2_auth_password($connection, $user, $pass);
if (false === $auth) {
error_log("ERROR função SSH_UMTELECOM: Authentication failed on $input_host_ip (user: $user)!\n",3,$log_file);
exit();
}else{
if($debugar){error_log("SSH_UMTELECOM: Authentication success to $input_host_ip!\n",3,$log_file);}
error_log("Iniciando Stream: $connection\n",3,$log_file);
$output_array = array();
$shell = ssh2_shell($connection, 'vt100');
foreach($input_cmd as $cmd){
if($debugar){error_log("shell: $cmd\n",3,$log_file);}
$output_stream = ""; # Limpa variável para cada interação
fwrite($shell, "$cmd\n"); # Não esquecer o "\n" ao término de cada comando
#stream_set_blocking($shell, true); # Não funciona, aguarda infinitamente
sleep(2); # 2 segundos para redes com alta latência
while($output_streams = fgets($shell)){
$output_stream .= $output_streams;
flush();# Limpa o conteúdo para a próxima interação
}
$output_array[] = $output_stream; # Reune cada retorno em seu respectivo comando
}
fclose($shell); # Gracius logout from shell
}# Fim if false === $auth
}# Fim if false === $conenection