Memcached::set
(PECL memcached >= 0.1.0)
Memcached::set — Store an item
Описание
Memcached::set() stores the value
on a memcache server under the specified key. The
expiration parameter can be used to control when the
value is considered expired.
The value can be any valid PHP type except for resources, because those
cannot be represented in a serialized form. If the
Memcached::OPT_COMPRESSION option is turned on, the
serialized value will also be compressed before storage.
Список параметров
-
key -
Ключ, под которым сохраняется значение.
-
value -
Сохраняемое значение.
-
expiration -
Время хранения объекта, по умолчанию равно 0. Для более подробной информации смотрите Время хранения объекта.
Возвращаемые значения
Возвращает TRUE в случае успешного завершения или FALSE в случае возникновения ошибки.
Используйте при необходимости Memcached::getResultCode().
Примеры
Пример #1 Memcached::set() example
<?php
$m = new Memcached();
$m->addServer('localhost', 11211);
$m->set('int', 99);
$m->set('string', 'a simple string');
$m->set('array', array(11, 12));
/* expire 'object' key in 5 minutes */
$m->set('object', new stdclass, time() + 300);
var_dump($m->get('int'));
var_dump($m->get('string'));
var_dump($m->get('array'));
var_dump($m->get('object'));
?>
Результатом выполнения данного примера будет что-то подобное:
int(99)
string(15) "a simple string"
array(2) {
[0]=>
int(11)
[1]=>
int(12)
}
object(stdClass)#1 (0) {
}
Смотрите также
- Memcached::setByKey() - Store an item on a specific server
- Memcached::add() - Add an item under a new key
- Memcached::replace() - Replace the item under an existing key
- Функция Memcached::add() - Add an item under a new key
- Функция Memcached::addByKey() - Add an item under a new key on a specific server
- Функция Memcached::addServer() - Add a server to the server pool
- Функция Memcached::addServers() - Add multiple servers to the server pool
- Функция Memcached::append() - Append data to an existing item
- Функция Memcached::appendByKey() - Append data to an existing item on a specific server
- Функция Memcached::cas() - Compare and swap an item
- Функция Memcached::casByKey() - Compare and swap an item on a specific server
- Функция Memcached::__construct() - Create a Memcached instance
- Функция Memcached::decrement() - Decrement numeric item's value
- Функция Memcached::decrementByKey() - Decrement numeric item's value, stored on a specific server
- Функция Memcached::delete() - Delete an item
- Функция Memcached::deleteByKey() - Delete an item from a specific server
- Функция Memcached::deleteMulti() - Delete multiple items
- Функция Memcached::deleteMultiByKey() - Delete multiple items from a specific server
- Функция Memcached::fetch() - Fetch the next result
- Функция Memcached::fetchAll() - Fetch all the remaining results
- Функция Memcached::flush() - Invalidate all items in the cache
- Функция Memcached::get() - Retrieve an item
- Функция Memcached::getAllKeys() - Gets the keys stored on all the servers
- Функция Memcached::getByKey() - Retrieve an item from a specific server
- Функция Memcached::getDelayed() - Request multiple items
- Функция Memcached::getDelayedByKey() - Request multiple items from a specific server
- Функция Memcached::getMulti() - Retrieve multiple items
- Функция Memcached::getMultiByKey() - Retrieve multiple items from a specific server
- Функция Memcached::getOption() - Retrieve a Memcached option value
- Функция Memcached::getResultCode() - Return the result code of the last operation
- Функция Memcached::getResultMessage() - Return the message describing the result of the last operation
- Функция Memcached::getServerByKey() - Map a key to a server
- Функция Memcached::getServerList() - Get the list of the servers in the pool
- Функция Memcached::getStats() - Get server pool statistics
- Функция Memcached::getVersion() - Get server pool version info
- Функция Memcached::increment() - Increment numeric item's value
- Функция Memcached::incrementByKey() - Increment numeric item's value, stored on a specific server
- Функция Memcached::isPersistent() - Check if a persitent connection to memcache is being used
- Функция Memcached::isPristine() - Check if the instance was recently created
- Функция Memcached::prepend() - Prepend data to an existing item
- Функция Memcached::prependByKey() - Prepend data to an existing item on a specific server
- Функция Memcached::quit() - Close any open connections
- Функция Memcached::replace() - Replace the item under an existing key
- Функция Memcached::replaceByKey() - Replace the item under an existing key on a specific server
- Функция Memcached::resetServerList() - Clears all servers from the server list
- Функция Memcached::set() - Store an item
- Функция Memcached::setByKey() - Store an item on a specific server
- Функция Memcached::setMulti() - Store multiple items
- Функция Memcached::setMultiByKey() - Store multiple items on a specific server
- Функция Memcached::setOption() - Set a Memcached option
- Функция Memcached::setOptions() - Set Memcached options
- Функция Memcached::setSaslAuthData() - Set the credentials to use for authentication
- Функция Memcached::touch() - Set a new expiration on an item
- Функция Memcached::touchByKey() - Set a new expiration on an item on a specific server
Коментарии
The method correctly returns false if you set the value to false. This means that in order to have proper fault checking mechanism in place you need to check the result code.
<?php
$Memcached = new Memcached();
$Memcached->addServer('localhost', 11211);
$Memcached->set('key', false);
var_dump($Memcached->get('key')); // boolean false
var_dump($Memcached->getResultCode()); // int 0 which is Memcached::RES_SUCCESS
?>
Unlike Memcache, Memcached will not replace spaces in keys with underscores for you, and will instead send the key as provided which will cause an error that can result in keys and values being mismatched. You can avoid this problem by removing/replacing spaces before storage or setting the option Memcached::OPT_BINARY_PROTOCOL to true.00 = MEMCACHED_SUCCESS01 = MEMCACHED_FAILURE
02 = MEMCACHED_HOST_LOOKUP_FAILURE // getaddrinfo() and getnameinfo() only
03 = MEMCACHED_CONNECTION_FAILURE
04 = MEMCACHED_CONNECTION_BIND_FAILURE // DEPRECATED see MEMCACHED_HOST_LOOKUP_FAILURE
05 = MEMCACHED_WRITE_FAILURE
06 = MEMCACHED_READ_FAILURE
07 = MEMCACHED_UNKNOWN_READ_FAILURE
08 = MEMCACHED_PROTOCOL_ERROR
09 = MEMCACHED_CLIENT_ERROR
10 = MEMCACHED_SERVER_ERROR // Server returns "SERVER_ERROR"
11 = MEMCACHED_ERROR // Server returns "ERROR"
12 = MEMCACHED_DATA_EXISTS
13 = MEMCACHED_DATA_DOES_NOT_EXIST
14 = MEMCACHED_NOTSTORED
15 = MEMCACHED_STORED
16 = MEMCACHED_NOTFOUND
17 = MEMCACHED_MEMORY_ALLOCATION_FAILURE
18 = MEMCACHED_PARTIAL_READ
19 = MEMCACHED_SOME_ERRORS
20 = MEMCACHED_NO_SERVERS
21 = MEMCACHED_END
22 = MEMCACHED_DELETED
23 = MEMCACHED_VALUE
24 = MEMCACHED_STAT
25 = MEMCACHED_ITEM
26 = MEMCACHED_ERRNO
27 = MEMCACHED_FAIL_UNIX_SOCKET // DEPRECATED
28 = MEMCACHED_NOT_SUPPORTED
29 = MEMCACHED_NO_KEY_PROVIDED /* Deprecated. Use MEMCACHED_BAD_KEY_PROVIDED! */
30 = MEMCACHED_FETCH_NOTFINISHED
31 = MEMCACHED_TIMEOUT
32 = MEMCACHED_BUFFERED
33 = MEMCACHED_BAD_KEY_PROVIDED
34 = MEMCACHED_INVALID_HOST_PROTOCOL
35 = MEMCACHED_SERVER_MARKED_DEAD
36 = MEMCACHED_UNKNOWN_STAT_KEY
37 = MEMCACHED_E2BIG
38 = MEMCACHED_INVALID_ARGUMENTS
39 = MEMCACHED_KEY_TOO_BIG
40 = MEMCACHED_AUTH_PROBLEM
41 = MEMCACHED_AUTH_FAILURE
42 = MEMCACHED_AUTH_CONTINUE
43 = MEMCACHED_PARSE_ERROR
44 = MEMCACHED_PARSE_USER_ERROR
45 = MEMCACHED_DEPRECATED
46 = MEMCACHED_IN_PROGRESS
47 = MEMCACHED_SERVER_TEMPORARILY_DISABLED
48 = MEMCACHED_SERVER_MEMORY_ALLOCATION_FAILURE
49 = MEMCACHED_MAXIMUM_RETURN /* Always add new error code before */
11 = MEMCACHED_CONNECTION_SOCKET_CREATE_FAILURE = MEMCACHED_ERROR
In the example it shows:
/* expire 'object' key in 5 minutes */
$m->set('object', new stdclass, time() + 300);
But this is wrong.
It will not expire, at least, not for a long long time.
So instead of time() + seconds, you use:
$m->set('object', new stdclass, 300);
And it will correctly expire after 5 minutes.
Note: Using memcached 2.1.0 stable through PECL.
@PeterN
You said that this was wrong:
$m->set('object', new stdclass, time() + 300);
And instead this is the correct way:
$m->set('object', new stdclass, 300);
When actually, they are both correct. Expiration looks at the time given, if the number is less than or equal to 30 days(60 * 60 * 24 * 30 = 2,592,000), then it expires in that many seconds. If the number is greater than 30 days, then it expires at that UNIX time.