fwrite

(PHP 4, PHP 5, PHP 7)

fwriteБинарно-безопасная запись в файл

Описание

int fwrite ( resource $handle , string $string [, int $length ] )

fwrite() записывает содержимое string в файловый поток handle.

Список параметров

handle

Указатель (resource) на файл, обычно создаваемый с помощью функции fopen().

string

Записываемая строка.

length

Если передан аргумент length, запись остановится после того, как length байтов будут записаны или будет достигнут конец строки string, смотря что произойдёт первым.

Учтите, что если указан аргумент length, то директива magic_quotes_runtime будет проигнорирована и строка string не будет очищена от слешей.

Возвращаемые значения

fwrite() возвращает количество записанных байт или FALSE в случае ошибки.

Примечания

Замечание:

Запись в сетевой поток может прекратиться до того, как будут записаны все данные. Это можно контролировать с помощью проверки возвращаемого значения функции fwrite():

<?php
function fwrite_stream($fp$string) {
    for (
$written 0$written strlen($string); $written += $fwrite) {
        
$fwrite fwrite($fpsubstr($string$written));
        if (
$fwrite === false) {
            return 
$written;
        }
    }
    return 
$written;
}
?>

Замечание:

В системах, различающих двоичные и текстовые файлы (к примеру, Windows), файл должен быть открыт используя флаг 'b' в конце аргумента mode функции fopen().

Замечание:

Если дескриптор handle был открыт функцией fopen() в режиме "записи в конец", то вызовы fwrite() будут атомарными (за исключением случая, если string размер блока файловой системы, на некоторых платформах, и пока файл хранится на локальной файловой системе). Т.е. нет необходимости блокировать ресурс с помощью flock() перед вызовом fwrite() - все данные будут записаны без прерываний.

Замечание:

При повторной записи в файловый указатель данные будут добавлены в конец содержимого файла:

<?php
$fp 
fopen('data.txt''w');
fwrite($fp'1');
fwrite($fp'23');
fclose($fp);

// содержимое 'data.txt' теперь 123, а не 23!
?>

Примеры

Пример #1 Простой пример использования fwrite()

<?php
$filename 
'test.txt';
$somecontent "Добавить это к файлу\n";

// Вначале давайте убедимся, что файл существует и доступен для записи.
if (is_writable($filename)) {

    
// В нашем примере мы открываем $filename в режиме "записи в конец".
    // Таким образом, смещение установлено в конец файла и
    // наш $somecontent допишется в конец при использовании fwrite().
    
if (!$handle fopen($filename'a')) {
         echo 
"Не могу открыть файл ($filename)";
         exit;
    }

    
// Записываем $somecontent в наш открытый файл.
    
if (fwrite($handle$somecontent) === FALSE) {
        echo 
"Не могу произвести запись в файл ($filename)";
        exit;
    }

    echo 
"Ура! Записали ($somecontent) в файл ($filename)";

    
fclose($handle);

} else {
    echo 
"Файл $filename недоступен для записи";
}
?>

Смотрите также

  • fread() - Бинарно-безопасное чтение файла
  • fopen() - Открывает файл или URL
  • fsockopen() - Открывает соединение с интернет сокетом или доменным сокетом Unix
  • popen() - Открывает файловый указатель процесса
  • file_get_contents() - Читает содержимое файла в строку

Коментарии

Автор:
Don't forget to check fwrite returns for errors! Just because you successfully opened a file for write, doesn't always mean you can write to it. 

On some systems this can occur if the filesystem is full, you can still open the file and create the filesystem inode, but the fwrite will fail, resulting in a zero byte file.
2003-05-19 06:12:36
http://php5.kiev.ua/manual/ru/function.fwrite.html
Автор:
Use caution when using:

$content = fread($fh, filesize($fh)) or die "Error Reading";

This will cause an error if the file you are reading is zero length.

Intead use:

if ( false === fread($fh, filesize($fh)) ) die "Error Reading";

Thus it will be successful on reading zero bytes but detect and error returned as FALSE.
2003-06-04 14:35:09
http://php5.kiev.ua/manual/ru/function.fwrite.html
the fwrite output striped the slashes if without length argument given, example:

<?php
$str 
"c:\\01.txt";
$out fopen("out.txt""w");
fwrite($out$str);
fclose($out);
?>

the out.txt will be:
c:^@1.txt
the '\\0' without escape will be '\0' ==> 0x00.

the correct one is change fwrite to:
fwrite($out, $str, strlen($str));
2003-06-20 05:36:23
http://php5.kiev.ua/manual/ru/function.fwrite.html
Автор:
[Ed. Note:
The runtime configuration setting auto_detect_line_endings should solve this problem when set to On.]

I figured out problems when writing to a file using \r as linebreak, after that file() wasn't able to read the data from that file.
Using \n solved the problem.
2003-07-17 05:32:39
http://php5.kiev.ua/manual/ru/function.fwrite.html
Hope this helps other newbies.

If you are writing data to a txt file on a windows system and need a line break. use \r\n . This will write hex OD OA.

i.e.
$batch_data= "some data... \r\n";
fwrite($fbatch,$batch_data);

The is the equivalent of opening a txt file in notepad pressing enter and the end of the line and saving it.
2003-08-21 18:04:53
http://php5.kiev.ua/manual/ru/function.fwrite.html
In PHP 4.3.7 fwrite returns 0 rather than false on failure.
The following example will output "SUCCESS: 0 bytes written" for existing file test.txt:

$fp = fopen("test.txt", "rw");
if (($bytes_written = fwrite($fp, "This is a test")) === false) {
  echo "Unable to write to test.txt\n\n";
} else {
  echo "SUCCESS: $bytes_written bytes written\n\n";
}
2004-10-26 18:32:40
http://php5.kiev.ua/manual/ru/function.fwrite.html
Watch out for mistakes in writting a simple code for a hit counter:
<?php
$cont
=fopen('cont.txt','r');
$incr=fgets($cont);
//echo $incr;
$incr++;
fclose($cont);
$cont=fopen('cont.txt','a');
fwrite($cont,$incr);
fclose($cont);
?>

Why? notice the second fopen -> $cont=fopen('cont.txt','a');
it opens the file in writting mode (a). And when it ads the incremented
value ( $incr ) it ads it ALONG the old value... so opening the counter
page about 5 times will make your hits number look like this
012131214121312151.21312141213E+ .... you get the piont.
nasty, isn't it? REMEMBER to open the file with the 'w' mode (truncate
the file to 0). Doing this will clear the file content and it will make sure that
your counter works nice. This is the final code

<?php
$cont
=fopen('cont.txt','r');
$incr=fgets($cont);
//echo $incr;
$incr++;
fclose($cont);
$cont=fopen('cont.txt','w');
fwrite($cont,$incr);
fclose($cont);
?>

Notice that this work fine =)
XU (alias Iscu Andrei)
2004-12-22 11:56:08
http://php5.kiev.ua/manual/ru/function.fwrite.html
I needed to append, but I needed to write on the file's beginning, and after some hours of effort this worked for me:

$file = "file.txt";
if (!file_exists("file.txt")) touch("file.txt");
$fh = fopen("file.txt", "r");
$fcontent = fread($fh, filesize("file.txt"));

$towrite = "$newcontent $fcontent";

$fh22 = fopen('file.txt', 'w+');
fwrite($fh2, $towrite);
fclose($fh);
fclose($fh2);
2005-02-03 13:27:11
http://php5.kiev.ua/manual/ru/function.fwrite.html
Автор:
if you want to create quickly and without fopen use system, exec

system('echo "blahblah" > /path/file');
2005-02-09 23:55:12
http://php5.kiev.ua/manual/ru/function.fwrite.html
Using fwrite to write to a file in your include folder...

PHP does not recognise the permissions setting for the file until you restart the server... this script works fine. (still have to create the blank text file first though...it is not created automatically) On OS X Server..
Using the 1 in fopen tells php to look for the file in your include folder. Change your include folder by altering include_path in php.ini
On OS X Server, php.ini is in private/etc/php.ini.default
copy the file and call it php.ini

the default include path is usr/lib/php
(All these folders are hidden - use TinkerTool to reveal them)

<?php
$file 
fopen('textfile.txt''a'1);
$text="\n Your text to write \n ".date('d')."-".date('m')."-".date('Y')."\n\n";
fwrite($file$text); 
fclose($file);
?>
2005-03-25 08:24:16
http://php5.kiev.ua/manual/ru/function.fwrite.html
Автор:
bluevd at gmail dot com mentioned a hit counter. In his/her implementation, the file is first opened, read, closed, then opened +truncated, then written, and closed again. An alternative to this is:
<?php
$file 
'counter.txt or whatever';
$handle fopen ($file'r+'); // Let's open for read and write
$count int (fread ($handlefilesize ($file)));
// We don't want to think it's a string and try appending
echo "Number of hits $count";
rewind ($handle); // Go back to the beginning
/*
 * Note that we don't have problems with 9 being fewer characters than
 * 10 because we are always incrementing, so we will always write at
 * least as many characters as we read
 **/
fwrite ($handle, ++$count); // Don't forget to increment the counter
fclose ($handle); // Done
?>
2005-05-12 08:25:11
http://php5.kiev.ua/manual/ru/function.fwrite.html
I could'nt quite get MKP Dev hit counter to work.... this is how I modified it
<?
function hitcount()
{
$file "counter.txt";
if ( !
file_exists($file)){
       
touch ($file);
       
$handle fopen ($file'r+'); // Let's open for read and write
       
$count 0;

}
else{
       
$handle fopen ($file'r+'); // Let's open for read and write
       
$count fread ($handlefilesize ($file));
       
settype ($count,"integer");
}
rewind ($handle); // Go back to the beginning
/*
 * Note that we don't have problems with 9 being fewer characters than
  * 10 because we are always incrementing, so we will always write at
   * least as many characters as we read
    **/
fwrite ($handle, ++$count); // Don't forget to increment the counter
fclose ($handle); // Done 

return $count;
}     
?>
2005-07-06 11:09:22
http://php5.kiev.ua/manual/ru/function.fwrite.html
Use this to get a UTF-8 Unicode CSV file that opens properly in Excel:

$tmp = chr(255).chr(254).mb_convert_encoding( $tmp, 'UTF-16LE', 'UTF-8'); 
$write = fwrite( $filepath, $tmp );

Use a tab character, not comma, to seperate the fields in  the $tmp.

Credit for this goes to someone called Eugene Murai, I found this solution by him after searching for several hours.
2006-09-11 03:08:40
http://php5.kiev.ua/manual/ru/function.fwrite.html
For those who, like me, lost a lot of minutes (hours) to understand why fwrite doesn't create a real utf-8 file, here's the explanation I've found :

I tried to do something like this :
<?php
$myString 
utf8_encode("Test with accents éèàç");
$fh=fopen('test.xml',"w");
fwrite($fh,$myString);
fclose($fh);
?>

For a mysterious reason, the resulted file shows the accent without the utf-8 conversion.

I tried the binary, mode, etc. etc. And finally I've found it :
It seems that fwrite NEEDS to have the utf8_encode function INSIDE its parameters like this, to understand it must create a non-text only file :
<?php
$myString 
"Test with accents éèàç";
$fh=fopen('test.xml',"w");
fwrite($fh,utf8_encode($myString));
fclose($fh);
?>
Hope this will help
2007-03-09 05:09:59
http://php5.kiev.ua/manual/ru/function.fwrite.html
Remember to check the return value of fwrite(). In particular, writing into a socket can return fewer bytes than requested, and you'll have to try again with the remainder of your data.
2007-09-05 13:13:14
http://php5.kiev.ua/manual/ru/function.fwrite.html
Some people say that when writing to a socket not all of the bytes requested to be written may be written. You may have to call fwrite again to write bytes that were not written the first time. (At least this is how the write() system call in UNIX works.)

This is helpful code (warning: not tested with multi-byte character sets)

function fwrite_with_retry($sock, &$data)
{
    $bytes_to_write = strlen($data);
    $bytes_written = 0;

    while ( $bytes_written < $bytes_to_write )
    {
        if ( $bytes_written == 0 ) {
            $rv = fwrite($sock, $data);
        } else {
            $rv = fwrite($sock, substr($data, $bytes_written));
        }

        if ( $rv === false || $rv == 0 )
            return( $bytes_written == 0 ? false : $bytes_written );

        $bytes_written += $rv;
    }

    return $bytes_written;
}

Call this like so:

    $rv = fwrite_with_retry($sock, $request_string);

    if ( ! $rv )
        die("unable to write request_string to socket");
    if ( $rv != strlen($request_string) )
        die("sort write to socket on writing request_string");
2008-02-20 12:47:02
http://php5.kiev.ua/manual/ru/function.fwrite.html
Remember to use double-quotes when outputting special characters such as \n or they come out literally.

...
2008-04-01 08:26:13
http://php5.kiev.ua/manual/ru/function.fwrite.html
if (is_writable($filename)) {

Could also be

if (is_writable($filename) or die ("Can not write to ".$filename)) {
2008-10-09 20:25:12
http://php5.kiev.ua/manual/ru/function.fwrite.html
If you are trying to write binary/structured data (e.g., a 4-byte sequence for an (int)) to a file, you will need to use:
http://php.net/pack
2008-11-10 17:07:37
http://php5.kiev.ua/manual/ru/function.fwrite.html
Автор:
If you write with the pointer in the middle of a file, it overwrites what's there rather than shifting the rest of the file along.
2009-05-15 12:36:07
http://php5.kiev.ua/manual/ru/function.fwrite.html
this the another sample to use fwrite with create a folder and create the txt file.

<?php
$mypath
="testdir\\subdir\\test";
mkdir($mypath,0777,TRUE);
$filename $mypath.'\test.txt';
$handle fopen($filename,"x+");
$somecontent "Add this to the file Oktavianus";
fwrite($handle,$somecontent);
echo 
"Success";
fclose($handle);
?> 

please try...
Oktavianus
2009-06-03 23:51:55
http://php5.kiev.ua/manual/ru/function.fwrite.html
After having problems with fwrite() returning 0 in cases where one would fully expect a return value of false, I took a look at the source code for php's fwrite() itself. The function will only return false if you pass in invalid arguments. Any other error, just as a broken pipe or closed connection, will result in a return value of less than strlen($string), in most cases 0.

Therefore, looping with repeated calls to fwrite() until the sum of number of bytes written equals the strlen() of the full value or expecting false on error will result in an infinite loop if the connection is lost.

This means the example fwrite_stream() code from the docs, as well as all the "helper" functions posted by others in the comments are all broken. You *must* check for a return value of 0 and either abort immediately or track a maximum number of retries.

Below is the example from the docs. This code is BAD, as a broken pipe will result in fwrite() infinitely looping with a return value of 0. Since the loop only breaks if fwrite() returns false or successfully writes all bytes, an infinite loop will occur on failure.

<?php
// BROKEN function - infinite loop when fwrite() returns 0s
function fwrite_stream($fp$string) {
    for (
$written 0$written strlen($string); $written += $fwrite) {
       
$fwrite fwrite($fpsubstr($string$written));
        if (
$fwrite === false) {
            return 
$written;
        }
    }
    return 
$written;
}
?>
2010-03-24 11:51:46
http://php5.kiev.ua/manual/ru/function.fwrite.html
Автор:
Be careful of using reserved Windows filenames in fwrite operations.

<?php
$fh 
fopen('prn.txt''w');
fwrite($fh'wtf?');
echo 
'done' PHP_EOL;
?>

The above script will hang (tested on Windows 7) before it can echo 'done'.

This is due to another 'feature' of our favourite operating system where filenames like prn.xxx, con.xxx, com1.xxx and aux.xxx (with xxx being any filename extension) are Windows reserved device names. Attempts to create/read/write to these files hangs the interpreter.
2011-04-01 05:48:06
http://php5.kiev.ua/manual/ru/function.fwrite.html
Note that the optional $length argument is expected to be an int, and cannot be skipped by passing null. 

That is, `fwrite($handle, $string, null)` is treated as `fwrite($handle, $string, 0)`, and will write zero bytes, not the whole string.
2014-02-04 06:49:59
http://php5.kiev.ua/manual/ru/function.fwrite.html
Автор:
Bad example!

The result of fwrite could be either FALSE or 0.

So it should be correctly:

if (false === fwrite($handle, $somecontent)) { ....
2014-09-09 17:56:08
http://php5.kiev.ua/manual/ru/function.fwrite.html
Автор:
Here you have a function found on the website http://softontherocks.blogspot.com/2014/11/funcion-para-escribir-en-un-fichero-log.html with an example of how to make a log file.

The function is this:

function writeLog($data) {
list($usec, $sec) = explode(' ', microtime());
$datetime = strftime("%Y%m%d %H:%M:%S",time());
$msg = "$datetime'". sprintf("%06s",intval($usec*1000000)).": $data";
$save_path = 'foo.txt';
$fp = @fopen($save_path, 'a'); // open or create the file for writing and append info
fputs($fp, "$msg\n"); // write the data in the opened file
fclose($fp); // close the file
}
2014-11-11 17:06:08
http://php5.kiev.ua/manual/ru/function.fwrite.html
Автор:
// you want copy dummy file or send dummy file 
// it is possible to send a file larger than 4GB and write without FSEEK used is limited by PHP_INT_MAX. it works on a system 32-bit or 64-bit
// fwrite and fread non pas de limite de position du pointeur 

<?php

$gfz 
filesize_dir("d:\\starwars.mkv"); // 11,5GB
echo 'Z:',$gfz,PHP_EOL;

$fz fopen('d:\\test2.mkv''wb'); 
$fp fopen('d:\\starwars.mkv''rb');
echo 
PHP_EOL;
$a = (float) 0;
while((
$l=fread($fp65536))) { 
   
fwrite($fz$l);
    if((
$a+=65536)%5) echo "\r"'>'$a' : ' $gfz;
}

fclose($fp);
fclose($fz);

// test2.mkv' is 11,5GB

   
function filesize_dir($file) {
       
exec('dir ' $file$inf);
       
$size_raw $inf[6];
       
$size_exp explode(" ",$size_raw);
       
$size_ext $size_exp[19];
       
$size_int = (float) str_replace(chr(255), ''$size_ext);
        return 
$size_int;
    }
?>
2016-04-02 20:48:42
http://php5.kiev.ua/manual/ru/function.fwrite.html
// you want copy dummy file or send dummy file 
// it is possible to send a file larger than 4GB and write without FSEEK used is limited by PHP_INT_MAX. it works on a system 32-bit or 64-bit
// fwrite and fread non pas de limite de position du pointeur 

<?php

$gfz 
filesize_dir("d:\\starwars.mkv"); // 11,5GB
echo 'Z:',$gfz,PHP_EOL;

$fz fopen('d:\\test2.mkv''wb'); 
$fp fopen('d:\\starwars.mkv''rb');
echo 
PHP_EOL;
$a = (float) 0;
while((
$l=fread($fp65536))) { 
   
fwrite($fz$l);
    if((
$a+=65536)%5) echo "\r"'>'$a' : ' $gfz;
}

fclose($fp);
fclose($fz);

// test2.mkv' is 11,5GB

   
function filesize_dir($file) {
       
exec('dir ' $file$inf);
       
$size_raw $inf[6];
       
$size_exp explode(" ",$size_raw);
       
$size_ext $size_exp[19];
       
$size_int = (float) str_replace(chr(255), ''$size_ext);
        return 
$size_int;
    }
?>
2016-04-02 20:49:25
http://php5.kiev.ua/manual/ru/function.fwrite.html
Автор:
This may save you time: note that neither "binary-safe file write" nor the use of b mode in fopen mean that fwrite can write binary. It can only write strings (or a single character). For example,  attempting to write the byte 0x1 using fwrite results in writing the byte value 0x31.

If you wish to write binary values (bits, bytes, integers, etc.), use a statement like fprintf($Res, "%c", 0x1); . This statement will write a byte to the current offset in the file without converting it to a character (in this case, it will write 0x1).
2016-07-27 05:01:16
http://php5.kiev.ua/manual/ru/function.fwrite.html
//fwrite writes over, i.e. this example (win) may be misleading:

$file = 'e:/1.txt';

file_put_contents($file, 'hello'.chr(1).'0df6ac'.chr(0));

$fp = fopen($file, 'r+b');

$str = fread($fp, filesize($file));

$str = strtr($str, [chr(0)=>'']);
echo $str.PHP_EOL;//hello0df6ac

fseek($fp, 0);//указатель в начало
fwrite($fp, $str);

fclose($fp);

//add ftruncate ($ fp, 0);
//this will overwrite the file:

file_put_contents($file, 'hello'.chr(1).'0df6ac'.chr(0));

$fp = fopen($file, 'r+b');

$str = fread($fp, filesize($file));

$str = strtr($str, [chr(0)=>'']);
echo $str.PHP_EOL;//hello0df6ac

ftruncate ($ fp, 0);
fseek($fp, 0);//указатель в начало
fwrite($fp, $str);

fclose($fp);
2019-10-14 14:31:43
http://php5.kiev.ua/manual/ru/function.fwrite.html
$handles can also be used to output in console like below example

fwrite(STDOUT, "Console Output");
2020-06-16 13:54:37
http://php5.kiev.ua/manual/ru/function.fwrite.html
if you need a function that writes all data, maybe try

<?php

   
/**
     * writes all data or throws
     *
     * @param mixed $handle
     * @param string $data
     * @throws \RuntimeException when fwrite returned <1 but still more data to write
     * @return void
     */
    /*private static*/ 
function fwrite_all($handlestring $data): void
   
{
       
$original_len strlen($data);
        if (
$original_len 0) {
           
$len $original_len;
           
$written_total 0;
            for (;;) {
               
$written_now fwrite($handle$data);
                if (
$written_now === $len) {
                    return;
                }
                if (
$written_now 1) {
                    throw new 
\RuntimeException("could only write {$written_total}/{$original_len} bytes!");
                }
               
$written_total += $written_now;
               
$data substr($data$written_now);
               
$len -= $written_now;
               
// assert($len > 0);
                // assert($len === strlen($data));
           
}
        }
    }
2021-01-28 03:09:32
http://php5.kiev.ua/manual/ru/function.fwrite.html
<?php
/*
Write to offset with positive offset 

PHP_INT_MIN / PHP_INT_MAX 32-bit PHP: -2,147,483,648 to +2,147,483,647
PHP_INT_MIN / PHP_INT_MAX 64-bit PHP: -9,223,372,036,854,775,808 to +9,223,372,036,854,775,807

File_writing 32bit 0 -> 4 294 967 295
File_writing 64bit 0 -> 18 446 744 073 709 551 615

$handel =     fopen( myfilname ); 
$t_f_max      is max file size in BYTE ex: 19998
$offset        is position in offset BYTE ex : 19995
$bin         your binary data you want write

Work in 32bit and 64bit
*/

function File_writing($handel,$t_f_max,$offset,$bin) {
                (
$offset PHP_INT_MAX) ? fseek($handel,-($t_f_max-$offset),SEEK_END) : fseek($handel,$offset,SEEK_SET);
               
fwrite($handel,$bin);
                return 
$offset;
        }

?>
2021-07-09 16:25:38
http://php5.kiev.ua/manual/ru/function.fwrite.html

    Поддержать сайт на родительском проекте КГБ