pg_connect
(PHP 4, PHP 5)
pg_connect — Open a PostgreSQL connection
Описание
pg_connect() opens a connection to a PostgreSQL database specified by the connection_string .
If a second call is made to pg_connect() with the same connection_string as an existing connection, the existing connection will be returned unless you pass PGSQL_CONNECT_FORCE_NEW as connect_type .
The old syntax with multiple parameters $conn = pg_connect("host", "port", "options", "tty", "dbname") has been deprecated.
Список параметров
- connection_string
-
The connection_string can be empty to use all default parameters, or it can contain one or more parameter settings separated by whitespace. Each parameter setting is in the form keyword = value. Spaces around the equal sign are optional. To write an empty value or a value containing spaces, surround it with single quotes, e.g., keyword = 'a value'. Single quotes and backslashes within the value must be escaped with a backslash, i.e., \' and \\.
The currently recognized parameter keywords are: host , hostaddr , port , dbname , user , password , connect_timeout , options , tty (ignored), sslmode , requiressl (deprecated in favor of sslmode ), and service . Which of these arguments exist depends on your PostgreSQL version.
- connect_type
-
If PGSQL_CONNECT_FORCE_NEW is passed, then a new connection is created, even if the connection_string is identical to an existing connection.
Возвращаемые значения
PostgreSQL connection resource on success, FALSE on failure.
Примеры
Пример #1 Using pg_connect()
<?php
$dbconn = pg_connect("dbname=mary");
//connect to a database named "mary"
$dbconn2 = pg_connect("host=localhost port=5432 dbname=mary");
// connect to a database named "mary" on "localhost" at port "5432"
$dbconn3 = pg_connect("host=sheep port=5432 dbname=mary user=lamb password=foo");
//connect to a database named "mary" on the host "sheep" with a username and password
$conn_string = "host=sheep port=5432 dbname=test user=lamb password=bar";
$dbconn4 = pg_connect($conn_string);
//connect to a database named "test" on the host "sheep" with a username and password
?>
- PHP Руководство
- Функции по категориям
- Индекс функций
- Справочник функций
- Расширения для работы с базами данных
- Расширения для работы с базами данных отдельных производителей
- PostgreSQL
- pg_affected_rows
- pg_cancel_query
- pg_client_encoding
- pg_close
- pg_connect_poll
- pg_connect
- pg_connection_busy
- pg_connection_reset
- pg_connection_status
- pg_consume_input
- pg_convert
- pg_copy_from
- pg_copy_to
- pg_dbname
- pg_delete
- pg_end_copy
- pg_escape_bytea
- pg_escape_identifier
- pg_escape_literal
- pg_escape_string
- pg_execute
- pg_fetch_all_columns
- pg_fetch_all
- pg_fetch_array
- pg_fetch_assoc
- pg_fetch_object
- pg_fetch_result
- pg_fetch_row
- pg_field_is_null
- pg_field_name
- pg_field_num
- pg_field_prtlen
- pg_field_size
- pg_field_table
- pg_field_type_oid
- pg_field_type
- pg_flush
- pg_free_result
- pg_get_notify
- pg_get_pid
- pg_get_result
- pg_host
- pg_insert
- pg_last_error
- pg_last_notice
- pg_last_oid
- pg_lo_close
- pg_lo_create
- pg_lo_export
- pg_lo_import
- pg_lo_open
- pg_lo_read_all
- pg_lo_read
- pg_lo_seek
- pg_lo_tell
- pg_lo_truncate
- pg_lo_unlink
- pg_lo_write
- pg_meta_data
- pg_num_fields
- pg_num_rows
- pg_options
- pg_parameter_status
- pg_pconnect
- pg_ping
- pg_port
- pg_prepare
- pg_put_line
- pg_query_params
- pg_query
- pg_result_error_field
- pg_result_error
- pg_result_seek
- pg_result_status
- pg_select
- pg_send_execute
- pg_send_prepare
- pg_send_query_params
- pg_send_query
- pg_set_client_encoding
- pg_set_error_verbosity
- pg_socket
- pg_trace
- pg_transaction_status
- pg_tty
- pg_unescape_bytea
- pg_untrace
- pg_update
- pg_version
Коментарии
If you use PostgreSQL users for authenticating into your pg database rather than using your own authentication, always specify host directive in pg_connect and edit pg_hba.conf to authenticate from this host accordingly. Otherwise, PHP will connect as 'local' using UNIX domain sockets, which is set in pg_hba.conf to 'trust' by default (so you can connect using psql on console without specifying password) and everyone can connect to db _without password_ .Little note that is buried in the install somewhere. In Php 3, PostgreSQL support was activated by adding --with-postgresql=[DIR] to the options passed to ./configure. With Php 4.0.2 (on Linux) the parameter was --with-pgsql. The only place I found this was in the installing PHP on Unix section of the manual.pg_connect() won't work with the authentication method 'crypt' in the pg_hba.conf. Took me an hour to figure that out till I remeberd some other issues with windows missing the crypt() call.At least with Postgres 7.2, connecting to local postgresdatabase requires a user in the database with the same name as the user running apache, or the connection fails.If you use host=HOSTNAME in your pg_connect string when connecting to PostgreSQL databases newer than 7.1, you need to make sure that your postmaster daemon is started with the "-i" option. Otherwise the connection will fail. See http://www.postgresql.org/idocs/index.php?client-authentication.html for client authentication documentation.pg_connect seems to support SSL connections, on systems where Postgres has been compiled with ssl, i'm assuming this is since psql uses libpq to connect.pg_connect can successfully connect, and use the "requiressl" argument.
regarding the note from matias at nospam dot projectcast dot comon 12-Feb-2002 01:16, you do not need a user in the database with the same name a your web user with ANY version of postgresql. The only time that would be a requirement ifs if you set your postgresql server to only allow IDENT based authentication (which IIRC is the default on Red Hat systems, which might be what lead to the confusion). For more info on the various authentication methods allowed by postgresql, check out http://www.postgresql.org/docs/7.4/static/client-authentication.html
if you need to open a new connection handle (i.e. for multiple pg_send_query()) use PGSQL_CONNECT_FORCE_NEW as second parameter to pg_connect()The values accepted by pg_connect's sslmode argument are: disable, allow, prefer, requireI got the same problem but I have to solve that in different way.
In my postgresql.conf file the following was commented.
So, I active that under Connection Settings-
# - Connection Settings –
tcpip_socket = true
It's not explicitly stated here, but you can also connect to PostgreSQL via a UNIX domain socket by leaving the host empty. This should have less overhead than using TCP e.g.:
$dbh = new PDO('pgsql:user=exampleuser dbname=exampledb password=examplepass');
In fact as the C library call PQconnectdb underlies this implementation, you can supply anything that this library call would take - the "pgsql:" prefix gets stripped off before PQconnectdb is called, and if you supply any of the optional arguments (e.g. user), then these arguments will be added to the string that you supplied... Check the docs for your relevant PostgreSQL client library: e.g.
http://www.postgresql.org/docs/8.3/static/libpq-connect.html
If you really want, you can use ';'s to separate your arguments - these will just be converted to spaces before PQconnectdb is called.
Tim.
Beware about writing something like
<?php
function getdb_FAILS() {
return pg_connect("...") or die('connection failed');
}
?>
It will return a boolean. This will appear to be fine if you don't use the return value as a db connection handle, but will fail if you do.
Instead, use:
<?php
function getdb() {
$db = pg_connect("...") or die('connection failed');
return $db;
}
?>
which actually returns a handle.
It's possible connect to a PostgreSQL database via Unix socket using the pg_connect() function by the following two ways:
1) Using the socket path:
<?php
$conn = pg_connect('host=/var/run/postgresql user=username dbname=databasename');
?>
2) Omitting the host name/path:
<?php
$conn = pg_connect('user=username dbname=databasename');
?>
Note: in this case (omitting the host value), the default socket path will be used.
One thing is to remember, whenever trying to use pg_connect, add the timeout parameter with it
<?php
$d=pg_connect('host=example.com user=pgsql dbname=postgres connect_timeout=5');
?>
If you use pgbouncer and unix socket
and you pgbouncer.ini looks like this
listen_port = 6432
unix_socket_dir = /tmp
you connect like this
pg_connect('host=/tmp port=6432 dbname=DB user=USER password=PASS');
Getting md5 passwords was confusing because of a lack of documentation:
- set up your pg_hba.conf in order to use md5 password instead of 'trust' or 'ident'
- check if your postgres.conf has 'password_encryption=on' (depending on the version this might already be 'on').
- make sure to restart your postgres process.
- in PHP you just supply the username and password in _plain_ text:
'host=localhost port=5432 dbname=megadb user=megauser password=holyhandbagsbatmanthispasswordisinplaintext'
The postgres PHP library will automagically do the md5 encoding for you, no need to do it yourself.
Using the "service" parameter as the connection string -- we found that the following functions:-
putenv("PGSERVICEFILE=/path/to/your/service/file/pg_service.conf");
$connect_string = ("service=testdb");
try {
$pgconn_handle = pg_connect($connect_string);
. . . . . etc.
Note:-
1) the environment variable has to point to the path AND file name.
2) the file has to be readable by Apache.
See:-
https://www.postgresql.org/docs/9.6/static/libpq-pgservice.html
for how to create your pg_service.conf
It is worth to know, that you can set application_name in connection string, consider this simple example:
<?php
$appName = $_SERVER['HTTP_HOST'] . $_SERVER['REQUEST_URI'];
$connStr = "host=localhost port=5432 dbname=postgres user=postgres options='--application_name=$appName'";
//simple check
$conn = pg_connect($connStr);
$result = pg_query($conn, "select * from pg_stat_activity");
var_dump(pg_fetch_all($result));
?>
By doing this move on cli or cgi you can see in pgAdmin what scripts are running or what requests are running on database. You can extend configuration of postgres to track slow queries and print application name to logs. It was very usuful to me to find out what and where should I optimize.
For what it's worth, it should be noted that, while PHP will generally handle connection-reuse for you so long as you keep using the same connection strings, as in the following example:
<?php
$before_conn1 = microtime(true);
$db1 = pg_connect($conn_string);
$before_conn2 = microtime(true);
$db2 = pg_connect($conn_string);
$after_conn2 = microtime(true);
echo($before_conn2 - $before_conn1); // Takes ~0.03s
echo("\n");
echo($after_conn2 - $before_conn2); // Takes 0s
?>
...as nice as it would have been, this does not hold true for async connections; you have to manage those yourself and you can't follow up an async connection with a blocking one later on as an easy way to wait for the connection process to complete before sending queries.
<?php
$before_conn1 = microtime(true);
$db1 = pg_connect($conn_string, PGSQL_CONNECT_ASYNC);
sleep(1);
$before_conn2 = microtime(true);
$db2 = pg_connect($conn_string);
$after_conn2 = microtime(true);
echo($before_conn2 - $before_conn1); // Takes ~1s
echo("\n");
echo($after_conn2 - $before_conn2); // Takes ~0.025s
?>