preg_split
(PHP 4, PHP 5)
preg_split — Разбивает строку по регулярному выражению
Описание
Возвращает массив, состоящий из подстрок заданной строки subject , которая разбита по границам, соответствующим шаблону pattern .
В случае, если параметр limit указан, функция возвращает не более, чем limit подстрок. Специальное значение limit , равное -1, подразумевает отсутствие ограничения, это весьма полезно для указания еще одного опционального параметра flags .
flags может быть произвольной комбинацией следующих флагов (соединение происходит при помощи оператора '|'):
- PREG_SPLIT_NO_EMPTY
- В случае, если этот флаг указан, функция preg_split() вернет только непустые подстроки.
- PREG_SPLIT_DELIM_CAPTURE
- В случае, если этот флаг указан, выражение, заключенное в круглые скобки в разделяющем шаблоне, также извлекается из заданной строки и возвращается функцией. Этот флаг был добавлен в PHP 4.0.5.
- PREG_SPLIT_OFFSET_CAPTURE
-
В случае, если этот флаг указан, для каждой найденной подстроки, будет указана ее позиция в исходной строке. Необходимо помнить, что этот флаг меняет формат возвращаемых данных: каждое вхождение возвращается в виде массива, в нулевом элементе которого содержится найденная подстрока, а в первом - смещение.
Пример #1 preg_split() пример: Получение подстрок из заданного текста
<?php
// разбиваем строку по произвольному числу запятых и пробельных символов,
// которые включают в себя " ", \r, \t, \n и \f
$keywords = preg_split("/[\s,]+/", "hypertext language, programming");
?>
Пример #2 Разбиваем строку на составляющие символы
<?php
$str = 'string';
$chars = preg_split('//', $str, -1, PREG_SPLIT_NO_EMPTY);
print_r($chars);
?>
Пример #3 Разбиваем строку с указанием смещения для каждой из найденных подстрок
<?php
$str = 'hypertext language programming';
$chars = preg_split('/ /', $str, -1, PREG_SPLIT_OFFSET_CAPTURE);
print_r($chars);
?>
На выходе получаем:
Array ( [0] => Array ( [0] => hypertext [1] => 0 ) [1] => Array ( [0] => language [1] => 10 ) [2] => Array ( [0] => programming [1] => 19 ) )
Замечание: Параметр flags был добавлен в PHP 4 Beta 3.
Смотрите также spliti(), split(), implode(), preg_match(), preg_match_all(), и preg_replace().
Коментарии
To clarify the "limit" parameter and the PREG_SPLIT_DELIM_CAPTURE option,
<?php
$preg_split('(/ /)', '1 2 3 4 5 6 7 8', 4 ,PREG_SPLIT_DELIM_CAPTURE );
?>
returns:
('1', ' ', '2', ' ' , '3', ' ', '4 5 6 7 8')
So you actually get 7 array items not 4
preg_split() behaves differently from perl's split() if the string ends with a delimiter. This perl snippet will print 5:
my @a = split(/ /, "a b c d e ");
print scalar @a;
The corresponding php code prints 6:
<?php print count(preg_split("/ /", "a b c d e ")); ?>
This is not necessarily a bug (nowhere does the documentation say that preg_split() behaves the same as perl's split()) but it might surprise perl programmers.
If the task is too complicated for preg_split, preg_match_all might come in handy, since preg_split is essentially a special case.
I wanted to split a string on a certain character (asterisk), but only if it wasn't escaped (by a preceding backslash). Thus, I should ensure an even number of backslashes before any asterisk meant as a splitter. Look-behind in a regular expression wouldn't work since the length of the preceding backslash sequence can't be fixed. So I turned to preg_match_all:
<?php
// split a string at unescaped asterisks
// where backslash is the escape character
$splitter = "/\\*((?:[^\\\\*]|\\\\.)*)/";
preg_match_all($splitter, "*$string", $aPieces, PREG_PATTERN_ORDER);
$aPieces = $aPieces[1];
// $aPieces now contains the exploded string
// and unescaping can be safely done on each piece
foreach ($aPieces as $idx=>$piece)
$aPieces[$idx] = preg_replace("/\\\\(.)/s", "$1", $piece);
?>
If you need convert function arguments without default default values and references, you can try this code:
<?php
$func_args = '$node, $op, $a3 = NULL, $form = array(), $a4 = NULL'
$call_arg = preg_match_all('@(?<func_arg>\$[^,= ]+)@i', $func_args, $matches);
$call_arg = implode(',', $matches['func_arg']);
?>
Result: string = "$node,$op,$a3,$form,$a4"
Extending m.timmermans's solution, you can use the following code as a search expression parser:
<?php
$search_expression = "apple bear \"Tom Cruise\" or 'Mickey Mouse' another word";
$words = preg_split("/[\s,]*\\\"([^\\\"]+)\\\"[\s,]*|" . "[\s,]*'([^']+)'[\s,]*|" . "[\s,]+/", $search_expression, 0, PREG_SPLIT_NO_EMPTY | PREG_SPLIT_DELIM_CAPTURE);
print_r($words);
?>
The result will be:
Array
(
[0] => apple
[1] => bear
[2] => Tom Cruise
[3] => or
[4] => Mickey Mouse
[5] => another
[6] => word
)
1. Accepted delimiters: white spaces (space, tab, new line etc.) and commas.
2. You can use either simple (') or double (") quotes for expressions which contains more than one word.
To split a camel-cased string using preg_split() with lookaheads and lookbehinds:
<?php
function splitCamelCase($str) {
return preg_split('/(?<=\\w)(?=[A-Z])/', $str);
}
?>
Sometimes PREG_SPLIT_DELIM_CAPTURE does strange results.
<?php
$content = '<strong>Lorem ipsum dolor</strong> sit <img src="test.png" />amet <span class="test" style="color:red">consec<i>tet</i>uer</span>.';
$chars = preg_split('/<[^>]*[^\/]>/i', $content, -1, PREG_SPLIT_NO_EMPTY | PREG_SPLIT_DELIM_CAPTURE);
print_r($chars);
?>
Produces:
Array
(
[0] => Lorem ipsum dolor
[1] => sit <img src="test.png" />amet
[2] => consec
[3] => tet
[4] => uer
)
So that the delimiter patterns are missing. If you wanna get these patters remember to use parentheses.
<?php
$chars = preg_split('/(<[^>]*[^\/]>)/i', $content, -1, PREG_SPLIT_NO_EMPTY | PREG_SPLIT_DELIM_CAPTURE);
print_r($chars); //parentheses added
?>
Produces:
Array
(
[0] => <strong>
[1] => Lorem ipsum dolor
[2] => </strong>
[3] => sit <img src="test.png" />amet
[4] => <span class="test" style="color:red">
[5] => consec
[6] => <i>
[7] => tet
[8] => </i>
[9] => uer
[10] => </span>
[11] => .
)
If you want to split by a char, but want to ignore that char in case it is escaped, use a lookbehind assertion.
In this example a string will be split by ":" but "\:" will be ignored:
<?php
$string='a:b:c\:d';
$array=preg_split('#(?<!\\\)\:#',$string);
print_r($array);
?>
Results into:
Array
(
[0] => a
[1] => b
[2] => c\:d
)
You must be caution when using lookbehind to a variable match.
For example:
'/(?<!\\\)\r?\n)/'
to match a new line when not \ is before it don't go as spected as it match \r as the lookbehind (becouse isn't a \) and is optional before \n.
You must use this for example:
'/((?<!\\\|\r)\n)|((?<!\\\)\r\n)/'
That match a alone \n (not preceded by \r or \) or a \r\n not preceded by a \.
Here is another way to split a CamelCase string, which is a simpler expression than the one using lookaheads and lookbehinds:
preg_split('/([[:upper:]][[:lower:]]+)/', $last, null, PREG_SPLIT_DELIM_CAPTURE|PREG_SPLIT_NO_EMPTY)
It makes the entire CamelCased word the delimiter, then returns the delimiters (PREG_SPLIT_DELIM_CAPTURE) and omits the empty values between the delimiters (PREG_SPLIT_NO_EMPTY)
Limit = 1 may be confusing. The important thing is that in case of limit equals to 1 will produce only ONE substring. Ergo the only one substring will be the first one as well as the last one. Tnat the rest of the string (after the first delimiter) will be placed to the last substring. But last is the first and only one.
<?php
$output = $preg_split('(/ /)', '1 2 3 4 5 6 7 8', 1);
echo $output[0] //will return whole string!;
$output = $preg_split('(/ /)', '1 2 3 4 5 6 7 8', 2);
echo $output[0] //will return 1;
echo $output[1] //will return '2 3 4 5 6 7 8';
?>
This is a function to truncate a string of text while preserving the whitespace (for instance, getting an excerpt from an article while maintaining newlines). It will not jive well with HTML, of course.
<?php
/**
* Truncates a string of text by word count
* @param string $text The text to truncate
* @param int $max_words The maximum number of words
* @return string The truncated text
*/
function limit_words ($text, $max_words) {
$split = preg_split('/(\s+)/', $text, -1, PREG_SPLIT_DELIM_CAPTURE);
$truncated = '';
for ($i = 0; $i < min(count($split), $max_words*2); $i += 2) {
$truncated .= $split[$i].$split[$i+1];
}
return trim($truncated);
}
?>
Split string into words.
<?php
$string = 'This - is a, very dirty "string" :-)';
// split into words
$wordlist = preg_split('/\W/', $string, 0, PREG_SPLIT_NO_EMPTY);
// returns only words that have minimum 2 chars
$wordlist = array_filter($wordlist, function($val) {
return strlen($val) >= 2;
});
// print
var_dump($wordlist);
?>
Result:
array (size=5)
0 => string 'This' (length=4)
1 => string 'is' (length=2)
3 => string 'very' (length=4)
4 => string 'dirty' (length=5)
5 => string 'string' (length=6)
This regular expression will split a long string of words into an array of sub-strings, of some maximum length, but only on word-boundries.
I use the reg-ex with preg_match_all(); but, I'm posting this example here (on the page for preg_split()) because that's where I looked when I wanted to find a way to do this.
Hope it saves someone some time.
<?php
// example of a long string of words
$long_string = 'Your IP Address will be logged with the submitted note and made public on the PHP manual user notes mailing list. The IP address is logged as part of the notes moderation process, and won\'t be shown within the PHP manual itself.';
// "word-wrap" at, for example, 60 characters or less
$max_len = 60;
// this regular expression will split $long_string on any sub-string of
// 1-or-more non-word characters (spaces or punctuation)
if(preg_match_all("/.{1,{$max_len}}(?=\W+)/", $long_string, $lines) !== False) {
// $lines now contains an array of sub-strings, each will be approx.
// $max_len characters - depending on where the last word ended and
// the number of 'non-word' characters found after the last word
for ($i=0; $i < count($lines[0]); $i++) {
echo "[$i] {$lines[0][$i]}\n";
}
}
?>
When using the PREG_SPLIT_OFFSET_CAPTURE option you will end up with all results in a single array, which is often undesirable as it means you then have to filter out any delimiters you wanted to check for but not keep.
To get around this you can instead use preg_match_all() to perform the split. For comparison, here are two examples, both splitting around colon and semi-colon characters:
<?php $pieces_with_delimiters = preg_split('/[;:]/', $input, -1, PREG_SPLIT_OFFSET_CAPTURE); ?>
<?php preg_match_all('/([^;:]*)([;:]|$)/', $input, $matches);
list(, $pieces, $delimiters) = $matches ?>
The latter requires a more complex pattern, but produces a much more convenient set of results to work with, depending upon what you want to do with them.
Assuming you're using UTF-8, this function can be used to separate Unicode text into individual codepoints without the need for the multibyte extension.
<?php
preg_split('//u', $text, -1, PREG_SPLIT_NO_EMPTY);
?>
The words "English", "Español", and "Русский" are all seven letters long. But strlen would report string lengths 7, 8 and 14, respectively. The preg_split above would return a seven-element array in all three cases.
It splits '한국어' into the array ['한', '국', '어'] instead of the 9-character array that str_split($text) would produce.
Beware that it is not safe to assume there are no empty values returned by PREG_SPLIT_NO_EMPTY, nor that you will see no delimiters if you use PREG_SPLIT_DELIM_CAPTURE, as there are some edge cases where these are not true.
<?php
# As expected, splitting a string by itself returns two empty strings:
var_export(preg_split("/x/", "x"));
array (
0 => '',
1 => '',
)
# But if we add PREG_SPLIT_NO_EMPTY, then instead of an empty array, we get the delimiter.
var_export(preg_split("/x/", "x", PREG_SPLIT_NO_EMPTY));
array (
0 => 'x',
)
And if we try to split an empty string, then instead of an empty array, we get an empty string even with PREG_SPLIT_NO_EMPTY.
var_export(preg_split("/x/", "", PREG_SPLIT_NO_EMPTY));
array (
0 => '',
)
?>
Using PREG_SPLIT_DELIM_CAPTURE without PREG_SPLIT_NO_EMPTY guarantees that all the odd-numbered keys in the result will contain the delimiters. This makes further processing more predictable, and empty strings can always be filtered out at the end.