Итераторы объектов
PHP 5 предоставляет такой способ объявления объектов, который дает возможность пройти по списку элементов данного объекта, например, с помощью оператора foreach. По умолчанию, в этом обходе (итерации) будут участвовать все видимые свойства объекта.
Пример #1 Итерация простого объекта
<?php
class MyClass
{
public $var1 = 'value 1';
public $var2 = 'value 2';
public $var3 = 'value 3';
protected $protected = 'protected var';
private $private = 'private var';
function iterateVisible() {
echo "MyClass::iterateVisible:\n";
foreach($this as $key => $value) {
print "$key => $value\n";
}
}
}
$class = new MyClass();
foreach($class as $key => $value) {
print "$key => $value\n";
}
echo "\n";
$class->iterateVisible();
?>
Результат выполнения данного примера:
var1 => value 1 var2 => value 2 var3 => value 3 MyClass::iterateVisible: var1 => value 1 var2 => value 2 var3 => value 3 protected => protected var private => private var
Как показывает результат, foreach проитерировал все доступные и принадлежащие объекту видимые свойства.
Кроме того, вы можете развить эту концепцию и реализовать встроенный в PHP 5 интерфейс Iterator. Это позволит самому объекту решать как он будет итерироваться и какие данные будут доступны на каждой итерации.
Пример #2 Объект Iteration, реализующий интерфейс Iterator
<?php
class MyIterator implements Iterator
{
private $var = array();
public function __construct($array)
{
if (is_array($array)) {
$this->var = $array;
}
}
public function rewind()
{
echo "перемотка в начало\n";
reset($this->var);
}
public function current()
{
$var = current($this->var);
echo "текущий: $var\n";
return $var;
}
public function key()
{
$var = key($this->var);
echo "ключ: $var\n";
return $var;
}
public function next()
{
$var = next($this->var);
echo "следующий: $var\n";
return $var;
}
public function valid()
{
$key = key($this->var);
$var = ($key !== NULL && $key !== FALSE);
echo "верный: $var\n";
return $var;
}
}
$values = array(1,2,3);
$it = new MyIterator($values);
foreach ($it as $a => $b) {
print "$a: $b\n";
}
?>
Результат выполнения данного примера:
перемотка в начало верный: 1 текущий: 1 ключ: 0 0: 1 следующий: 2 верный: 1 текущий: 2 ключ: 1 1: 2 следующий: 3 верный: 1 текущий: 3 ключ: 2 2: 3 следующий: верный:
Интерфейс IteratorAggregate может быть использован как альтернатива реализации всех методов интерфейса Iterator. IteratorAggregate требует чтобы был реализован только один метода - IteratorAggregate::getIterator(), который должен возвращать экземпляр класса, реализующий интерфейс Iterator.
Пример #3 Объект Iteration, реализующий интерфейс IteratorAggregate
<?php
class MyCollection implements IteratorAggregate
{
private $items = array();
private $count = 0;
// Требование интерфейса IteratorAggregate
public function getIterator() {
return new MyIterator($this->items);
}
public function add($value) {
$this->items[$this->count++] = $value;
}
}
$coll = new MyCollection();
$coll->add('value 1');
$coll->add('value 2');
$coll->add('value 3');
foreach ($coll as $key => $val) {
echo "ключ/значение: [$key -> $val]\n\n";
}
?>
Результат выполнения данного примера:
перемотка в начало текущий: value 1 верный: 1 текущий: value 1 ключ: 0 ключ/значение: [0 -> value 1] следующий: value 2 текущий: value 2 верный: 1 текущий: value 2 ключ: 1 ключ/значение: [1 -> value 2] следующий: value 3 текущий: value 3 верный: 1 текущий: value 3 ключ: 2 ключ/значение: [2 -> value 3] следующий: текущий: верный:
Замечание:
Больше примеров итераторов можно найти в расширении SPL.
Замечание:
Пользователи PHP 5.5 и более поздних версий также могут изучить генераторы, представляющие собой альтернативный способ определения итераторов.
- Введение
- Основы
- Свойства
- Константы классов
- Автоматическая загрузка классов
- Конструкторы и деструкторы
- Область видимости
- Наследование
- Оператор разрешения области видимости (::)
- Ключевое слово "static"
- Абстрактные классы
- Интерфейсы объектов
- Трейты
- Anonymous classes
- Перегрузка
- Итераторы объектов
- Магические методы
- Ключевое слово "final"
- Клонирование объектов
- Сравнение объектов
- Контроль типа
- Позднее статическое связывание
- Объекты и ссылки
- Сериализация объектов
- Журнал изменений ООП
Коментарии
if you in a string define classes that implements IteratorAggregate.you cant use the default;
<?
...
public function getIterator() {
return new MyIterator(\\$this-><What ever>);
}
..
?>
at least not if you want to use eval(<The string>).
You have to use:
<?
...
public function getIterator() {
\\$arrayObj=new ArrayObject(\\$this-><What ever>);
return \\$arrayObj->getIterator();
}
...
?>
You should be prepared for your iterator's current method to be called before its next method is ever called. This certainly happens in a foreach loop. If your means of finding the next item is expensive you might want to use something like this
private $item;
function next() {
$this->item = &$this->getNextItem();
return $this->item;
}
public function current() {
if(!isset($this->item)) $this->next();
return $this->item;
}
Use the SPL ArrayAccess interface to call an object as array:
http://www.php.net/~helly/php/ext/spl/interfaceArrayAccess.html
The MyIterator::valid() method above ist bad, because it
breaks on entries with 0 or empty strings, use key() instead:
<?php
public function valid()
{
return ! is_null(key($this->var));
}
?>
read about current() drawbacks:
http://php.net/current
If you want to do someting like this:
<?php
foreach($MyObject as $key => &$value)
$value = 'new '.$value;
?>
you must return values by reference in your iterator object:
<?php
class MyObject implements Iterator
{
/* ...... other iterator functions ...... */
/* return by reference */
public function ¤t()
{
return $something;
}
?>
This won't change values:
<?php
foreach($MyObject as $key => $value)
$value = 'new '.$value;
?>
This will change values:
<?php
foreach($MyObject as $key => &$value)
$value = 'new '.$value;
?>
I think this should be written somewhere in the documentations, but I couldn't find it.
To clarify on php at moechofe's post, you CAN use the SPL to overide the array operator for a class. This, with the new features of object, and autoloading (among a buch of other things) has me completely sold on PHP5. You can also find this information on the SPL portion of the manual, but I'll post it here as well so it isn't passed up. The below Collection class will let you use the class as an array, while also using the foreach iterator:
<?php
class Collection implements ArrayAccess,IteratorAggregate
{
public $objectArray = Array();
//**these are the required iterator functions
function offsetExists($offset)
{
if(isset($this->objectArray[$offset])) return TRUE;
else return FALSE;
}
function & offsetGet($offset)
{
if ($this->offsetExists($offset)) return $this->objectArray[$offset];
else return (false);
}
function offsetSet($offset, $value)
{
if ($offset) $this->objectArray[$offset] = $value;
else $this->objectArray[] = $value;
}
function offsetUnset($offset)
{
unset ($this->objectArray[$offset]);
}
function & getIterator()
{
return new ArrayIterator($this->objectArray);
}
//**end required iterator functions
public function doSomething()
{
echo "I'm doing something";
}
}
?>
I LOVE the new SPL stuff in PHP! An example of usage is below:
<?php
class Contact
{
protected $name = NULL;
public function set_name($name)
{
$this->name = $name;
}
public function get_name()
{
return ($this->name);
}
}
$bob = new Collection();
$bob->doSomething();
$bob[] = new Contact();
$bob[5] = new Contact();
$bob[0]->set_name("Superman");
$bob[5]->set_name("a name of a guy");
foreach ($bob as $aContact)
{
echo $aContact->get_name() . "\r\n";
}
?>
Would work just fine. This makes code so much simpler and easy to follow, it's great. This is exactly the direction I had hoped PHP5 was going!
Just something i noticed:
It seems, that when you are implementing the interface Iterator, yout method key() has to return a string or integer.
I was trying to return a object an got this error:
Illegal type returned from MyClass::key()
The example code given for valid() will break if the array contains a FALSE value. This code prints out a single "bool(true)" and exits the loop when it gets to the FALSE:
<?php
$A = array(TRUE, FALSE, TRUE, TRUE);
while(current($A) !== FALSE) {
var_dump(current($A));
next($A);
}
?>
Instead, the key() function should be used, since it returns NULL only at the end of the array. This code displays all four elements and then exits:
<?php
$A = array(TRUE, FALSE, TRUE, TRUE);
while(!is_null(key($A))) {
var_dump(current($A));
next($A);
}
?>
Beware of how works iterator in PHP if you come from Java!
In Java, iterator works like this :
<?php
interface Iterator<O> {
boolean hasNext();
O next();
void remove();
}
?>
But in php, the interface is this (I kept the generics and type because it's easier to understand)
<?php
interface Iterator<O> {
boolean valid();
mixed key();
O current();
void next();
void previous();
void rewind();
}
?>
1. valid() is more or less the equivalent of hasNext()
2. next() is not the equivalent of java next(). It returns nothing, while Java next() method return the next object, and move to next object in Collections. PHP's next() method will simply move forward.
Here is a sample with an array, first in java, then in php :
<?php
class ArrayIterator<O> implements Iterator<O> {
private final O[] array;
private int index = 0;
public ArrayIterator(O[] array) {
this.array = array;
}
public boolean hasNext() {
return index < array.length;
}
public O next() {
if ( !hasNext())
throw new NoSuchElementException('at end of array');
return array[index++];
}
public void remove() {
throw new UnsupportedOperationException('remove() not supported in array');
}
}
?>
And here is the same in php (using the appropriate function) :
<?php
/**
* Since the array is not mutable, it should use an internal
* index over the number of elements for the previous/next
* validation.
*/
class ArrayIterator implements Iterator {
private $array;
public function __construct($array) {
if ( !is_array($array))
throw new IllegalArgumentException('argument 0 is not an array');
$this->array = array;
$this->rewind();
}
public function valid() {
return current($this->array) !== false;
// that's the bad method (should use arrays_keys, + index)
}
public function key() {
return key($this->array);
}
public function current() {
return current($this->array);
}
public function next() {
if ( $this->valid())
throw new NoSuchElementException('at end of array');
next($this->array);
}
public function previous() {
// fails if current() = first item of array
previous($this->array);
}
public function rewind() {
reset($this->array);
}
}
?>
The difference is notable : don't expect next() to return something like in Java, instead use current(). This also means that you have to prefetch your collection to set the current() object. For instance, if you try to make a Directory iterator (like the one provided by PECL), rewind should invoke next() to set the first element and so on. (and the constructor should call rewind())
Also, another difference :
<?php
class ArrayIterable<O> implements Iterable<O> {
private final O[] array;
public ArrayIterable(O[] array) {
this.array = array;
}
public Iterator<O> iterator() {
return new ArrayIterator(array);
}
}
?>
When using an Iterable, in Java 1.5, you may do such loops :
<?php
for ( String s : new ArrayIterable<String>(new String[] {"a", "b"})) {
...
}
?>
Which is the same as :
<?php
Iterator<String> it = new ArrayIterable<String>(new String[] {"a", "b"});
while (it.hasNext()) {
String s = it.next();
...
}
?>
While in PHP it's not the case :
<?php
foreach ( $iterator as $current ) {
...
}
?>
Is the same as :
<?php
for ( $iterator->rewind(); $iterator->valid(); $iterator->next()) {
$current = $iterator->current();
...
}
?>
(I think we may also use IteratorAggregate to do it like with Iterable).
Take that in mind if you come from Java.
I hope this explanation is not too long...
The iterator template from knj at aider dot dk does not yield correct results.If you do
<?
reset($a);
next($a);
echo current($a);
?>
where $a is defined over the suggested template, then the first element will be output, not the second, as expected.
One should be aware that ArrayAccess functionality described by "just_somedood at yahoo dot com" below is currently broken and thus it's pretty unusable.
Read following links to find more:
http://bugs.php.net/bug.php?id=34783
http://bugs.php.net/bug.php?id=32983
Please remember that actually the only PHP iterating structure that uses Iterator is foreach().
Any each() or list() applied to an Object implementing iterator will not provide the expected result
By reading the posts below I wondered if it really is impossible to make an ArrayAccess implementation really behave like a true array ( by being multi level )
Seems like it's not impossible. Not very preety but usable
<?php
class ArrayAccessImpl implements ArrayAccess {
private $data = array();
public function offsetUnset($index) {}
public function offsetSet($index, $value) {
// echo ("SET: ".$index."<br>");
if(isset($data[$index])) {
unset($data[$index]);
}
$u = &$this->data[$index];
if(is_array($value)) {
$u = new ArrayAccessImpl();
foreach($value as $idx=>$e)
$u[$idx]=$e;
} else
$u=$value;
}
public function offsetGet($index) {
// echo ("GET: ".$index."<br>");
if(!isset($this->data[$index]))
$this->data[$index]=new ArrayAccessImpl();
return $this->data[$index];
}
public function offsetExists($index) {
// echo ("EXISTS: ".$index."<br>");
if(isset($this->data[$index])) {
if($this->data[$index] instanceof ArrayAccessImpl) {
if(count($this->data[$index]->data)>0)
return true;
else
return false;
} else
return true;
} else
return false;
}
}
echo "ArrayAccess implementation that behaves like a multi-level array<hr />";
$data = new ArrayAccessImpl();
$data['string']="Just a simple string";
$data['number']=33;
$data['array']['another_string']="Alpha";
$data['array']['some_object']=new stdClass();
$data['array']['another_array']['x']['y']="LOL @ Whoever said it can't be done !";
$data['blank_array']=array();
echo "'array' Isset? "; print_r(isset($data['array'])); echo "<hr />";
echo "<pre>"; print_r($data['array']['non_existent']); echo "</pre>If attempting to read an offset that doesn't exist it returns a blank object! Use isset() to check if it exists!<br>";
echo "'non_existent' Isset? "; print_r(isset($data['array']['non_existent'])); echo "<br />";
echo "<pre>"; print_r($data['blank_array']); echo "</pre>A blank array unfortunately returns similar results :(<br />";
echo "'blank_array' Isset? "; print_r(isset($data['blank_array'])); echo "<hr />";
echo "<pre>"; print_r($data); echo "</pre> (non_existent remains in the structure. If someone can help to solve this I'll appreciate it)<hr />";
echo "Display some value that exists: ".$data['array']['another_string'];
?>
(in the two links mentioned below by artur at jedlinski... they say you can't use references, so I didn't used them.
My implementation uses recursive objects)
If anyone finds a better (cleaner) sollution, please e-mail me.
Thanks,
Wave.
Iterator interface usign key() next() rewind() is MORE slow than extends ArrayIterator with ArrayIterator::next(), ArrayIterator::rewind(), etc.,there is still an open bug about using current() etc. with iteratorshttps://bugs.php.net/bug.php?id=49369
I've created a dinamic version of grzeniufication code to allow un-, serialize more than one property:
<?php
class Person implements \Serializable {
public $id;
public $name;
public $birthDate;
public $surname;
public function serialize() {
return serialize((array) $this);
}
public function unserialize($serialized): void {
foreach (unserialize($serialized) as $p => $v) {
$this->{$p} = $v;
}
}
}
The days of lovely care-to-the-wind typecasting are coming to close. Finding this devilish bug took us entirely too long.
PHP-8.2.1 was throwing errors seemingly uncaught (they were eventually seen amassing in / var / log / apache / DOMAIN-ssl-err.log ) due to mismatch between return types of the necessary interface methods in our 'implements \Iterator' class (which had worked fine for many years, until our leap up to 8.2.1) versus the interface methods required by PHP.
Particularly:
next()
=====
ours:
public function next() {...}
PHP-8.2.1's
public function next() : void {...}
valid()
======
ours:
public function valid() {...}
PHP-8.2.1's:
public function valid() : bool {...}
key()
====
ours:
public function key() {...}
PHP-8.2.1's:
public function key() : mixed {...}
rewind()
========
ours:
public function rewind() {...}
PHP-8.2.1's:
public function rewind() : void {...}
current()
=======
ours:
public function current() {...}
PHP-8.2.1's:
public function current() : mixed {...}
We added the missing / now all-important return types to our function/method declarations and everything instantly worked again.
This extreme stringency is not made clear enough, IMHO, in the Iterator manual page.