imagecolorsforindex

(PHP 4, PHP 5)

imagecolorsforindexGet the colors for an index

Description

array imagecolorsforindex ( resource $image , int $index )

Gets the color for a specified index.

Parameters

image

An image resource, returned by one of the image creation functions, such as imagecreatetruecolor().

index

The color index.

Return Values

Returns an associative array with red, green, blue and alpha keys that contain the appropriate values for the specified color index.

Examples

Example #1 imagecolorsforindex() example

<?php

// open an image
$im imagecreatefrompng('nexen.png');

// get a color
$start_x 40;
$start_y 50;
$color_index imagecolorat($im$start_x$start_y);

// make it human readable
$color_tran imagecolorsforindex($im$color_index);

// what is it ?
print_r($color_tran);

?>

The above example will output something similar to:

Array
(
   [red] => 226
   [green] => 222
   [blue] => 252
   [alpha] => 0
)

See Also

Коментарии

here's a function to greyscale an image even from a truecolor source (jpeg or png).

slightly poor quality, but very fast...

function imagegreyscale(&$img, $dither=1) {   
    if (!($t = imagecolorstotal($img))) {
        $t = 256;
        imagetruecolortopalette($img, $dither, $t);   
    }
    for ($c = 0; $c < $t; $c++) {   
        $col = imagecolorsforindex($img, $c);
        $min = min($col['red'],$col['green'],$col['blue']);
        $max = max($col['red'],$col['green'],$col['blue']);
        $i = ($max+$min)/2;
        imagecolorset($img, $c, $i, $i, $i);
    }
}
2004-04-23 12:23:40
http://php5.kiev.ua/manual/ru/function.imagecolorsforindex.html
Regarding m4551's method of conversion -- the actual CCIR-approved RGB-to-grayscale conversion is as follows:

grayscale component = 0.2125*R + 0.7154*G + 0.0721*B

(cf. CCIR Recommendation 709 for modern monitors)
2004-06-25 16:32:28
http://php5.kiev.ua/manual/ru/function.imagecolorsforindex.html
Автор:
To correct m4551 at abasoft dot it example:

ImageTrueColorToPalette($im,1,$t);

might give less colors than $t, so the for loop should call "$i<ImageColorsTotal($im)" instead of "$i<$t" just to be sure, or you'll get the warning: Color index [0-9] out of range
2005-08-23 19:05:02
http://php5.kiev.ua/manual/ru/function.imagecolorsforindex.html
this is a sepia filter using microsoft's definition

<?php

function imagesepia$img ) {
   
$total imagecolorstotal$img );
    for ( 
$i 0$i $total$i++ ) {
       
$index imagecolorsforindex$img$i );
       
$red = ( $index["red"] * 0.393 $index["green"] * 0.769 $index["blue"] * 0.189 ) / 1.351;
       
$green = ( $index["red"] * 0.349 $index["green"] * 0.686 $index["blue"] * 0.168 ) / 1.203;
       
$blue = ( $index["red"] * 0.272 $index["green"] * 0.534 $index["blue"] * 0.131 ) / 2.140;
       
imagecolorset$img$i$red$green$blue );
    }
}

?>
2007-08-26 12:54:30
http://php5.kiev.ua/manual/ru/function.imagecolorsforindex.html
If you would like to change the intensity or lightness level of a specific color, you will need to convert the color format from RGB to HSL. 
following function convert RGB array(red,green,blue) to HSL array(hue, saturation, lightness)
<?php
/**
 * Convert RGB colors array into HSL array
 * 
 * @param array $ RGB colors set
 * @return array HSL set
 */
 
function rgb2hsl($rgb){
   
     
$clrR = ($rgb[0] / 255);
     
$clrG = ($rgb[1] / 255);
     
$clrB = ($rgb[2] / 255);
   
     
$clrMin min($clrR$clrG$clrB);
     
$clrMax max($clrR$clrG$clrB);
     
$deltaMax $clrMax $clrMin;
   
     
$L = ($clrMax $clrMin) / 2;
   
     if (
== $deltaMax){
         
$H 0;
         
$S 0;
         }
    else{
         if (
0.5 $L){
             
$S $deltaMax / ($clrMax $clrMin);
             }
        else{
             
$S $deltaMax / ($clrMax $clrMin);
             }
         
$deltaR = ((($clrMax $clrR) / 6) + ($deltaMax 2)) / $deltaMax;
         
$deltaG = ((($clrMax $clrG) / 6) + ($deltaMax 2)) / $deltaMax;
         
$deltaB = ((($clrMax $clrB) / 6) + ($deltaMax 2)) / $deltaMax;
         if (
$clrR == $clrMax){
             
$H $deltaB $deltaG;
             }
        else if (
$clrG == $clrMax){
             
$H = (3) + $deltaR $deltaB;
             }
        else if (
$clrB == $clrMax){
             
$H = (3) + $deltaG $deltaR;
             }
         if (
$H$H += 1;
         if (
$H$H -= 1;
         }
     return array(
$H$S$L);
     }
?>
2007-09-06 06:50:41
http://php5.kiev.ua/manual/ru/function.imagecolorsforindex.html
Here's a better grayscale, sepia, and general tinting function.  This function is better because:

1) Works with true color images (the other sepia code didn't).
2) Provides a more gooder grayscale conversion (yes, I said "more gooder").  The other grayscale code used imagetruecolortopalette, which just doesn't work well for grayscale conversion.
3) The other sepia code was really colorful, a little too much for my taste.  This function allows you to optionally set the tinting of the grayscale to anything you wish.
4) Single function for grayscale, sepia, and any other tinting you can dream up.

Here's some examples:

imagegrayscaletint ($img);  // Grayscale, no tinting
imagegrayscaletint ($img,304,242,209);  // What I use for sepia
imagegrayscaletint ($img,0,0,255);  // A berry blue image

The RGB values for tinting are normally from 0 to 255.  But, you can use values larger than 255 to lighten and "burn" the image.  The sepia example above does this a little, the below example provides a better example of lightening the image and burning the light areas out a little:

imagegrayscaletint ($img,400,400,400);  // Lighten image
imagegrayscaletint ($img,127,127,127);  // Darken image

<?
function imagegrayscaletint (&$img$tint_r 255$tint_g 255$tint_b 255) {
 
$width imagesx($img); $height imagesy($img);
 
$dest imagecreate ($width$height);
  for (
$i=0$i<256$i++) imagecolorallocate ($dest$i$i$i);
 
imagecopyresized ($dest$img0000$width$height$width$height);
  for (
$i 0$i 256$i++) imagecolorset ($dest$imin($i abs($tint_r) / 255255), min($i abs($tint_g) / 255255), min($i abs($tint_b) / 255255));
 
$img imagecreate ($width$height);
 
imagecopy ($img$dest0000$width$height);
 
imagedestroy ($dest);
}
?>
2007-09-10 01:01:50
http://php5.kiev.ua/manual/ru/function.imagecolorsforindex.html
While it's quite easy and intuitive to get the alpha transparency of a pixel with:

<?php
$rgba     
imagecolorsforindex($imageimagecolorat($image$x$y));
$alpha     $rgba["alpha"];
?>

you should use the return value of the command imagecolorat to get the alpha transparency with the code below because it's much faster and will have a major impact if you process every pixel of an image:

<?php
$rgba     
imagecolorat($image$x$y);
$alpha     = ($rgba 0x7F000000) >> 24;
?>
2007-11-28 08:35:53
http://php5.kiev.ua/manual/ru/function.imagecolorsforindex.html
The earlier microsoft sepia example seemed to have a factor in which made it pinky... here is a modified example which uses just the Microsoft sepia (as per the wiki sepia entry)

<?
function imagetosepia(&$img) {
  if (!(
$t imagecolorstotal($img))) {
   
$t 256;
   
imagetruecolortopalette($imgtrue$t);
  }
 
$total imagecolorstotal$img );
  for ( 
$i 0$i $total$i++ ) {
   
$index imagecolorsforindex$img$i );
   
$red = ( $index["red"] * 0.393 $index["green"] * 0.769 $index["blue"] * 0.189 );
   
$green = ( $index["red"] * 0.349 $index["green"] * 0.686 $index["blue"] * 0.168 ); 
   
$blue = ( $index["red"] * 0.272 $index["green"] * 0.534 $index["blue"] * 0.131 ); 
    if (
$red 255) { $red 255; }
    if (
$green 255) { $green 255; }
    if (
$blue 255) { $blue 255; }
   
imagecolorset$img$i$red$green$blue );
  }
}
?>
2007-11-30 14:45:12
http://php5.kiev.ua/manual/ru/function.imagecolorsforindex.html
Автор:
Be aware that

<?php
$rgba     
imagecolorat($image$x$y);
$r = ($rgba >> 16) & 0xFF;
$g = ($rgba >> 8) & 0xFF;
$b $rgba 0xFF;
$a     = ($rgba 0x7F000000) >> 24;
?> 

will only work for truecolor images. With eg GIF images, this will have strange results. For GIF images, you should always use imagecolorsforindex().
2008-08-07 14:11:17
http://php5.kiev.ua/manual/ru/function.imagecolorsforindex.html
I have optimized the rgb2hsl function from slepichev a bit, so that it is a bit shorter and hopefully a bit faster:

<?php
/**
 * Convert RGB colors array into HSL array
 * 
 * @param array $ RGB colors set, each color component with range 0 to 255
 * @return array HSL set, each color component with range 0 to 1
 */
function rgb2hsl($rgb){
   
$clrR = ($rgb[0]);
   
$clrG = ($rgb[1]);
   
$clrB = ($rgb[2]);
     
   
$clrMin min($clrR$clrG$clrB);
   
$clrMax max($clrR$clrG$clrB);
   
$deltaMax $clrMax $clrMin;
     
   
$L = ($clrMax $clrMin) / 510;
     
    if (
== $deltaMax){
       
$H 0;
       
$S 0;
    }
    else{
        if (
0.5 $L){
           
$S $deltaMax / ($clrMax $clrMin);
        }
        else{
           
$S $deltaMax / (510 $clrMax $clrMin);
        }

        if (
$clrMax == $clrR) {
           
$H = ($clrG $clrB) / (6.0 $deltaMax);
        }
        else if (
$clrMax == $clrG) {
           
$H 1/+ ($clrB $clrR) / (6.0 $deltaMax);
        }
        else {
           
$H + ($clrR $clrG) / (6.0 $deltaMax);
        }

        if (
$H$H += 1;
        if (
$H$H -= 1;
    }
    return array(
$H$S,$L);
}
?>
2008-10-07 15:36:36
http://php5.kiev.ua/manual/ru/function.imagecolorsforindex.html

    Поддержать сайт на родительском проекте КГБ