imagefilter

(PHP 5)

imagefilterApplies a filter to an image

Description

bool imagefilter ( resource $image , int $filtertype [, int $arg1 [, int $arg2 [, int $arg3 [, int $arg4 ]]]] )

imagefilter() applies the given filter filtertype on the image.

Parameters

image

An image resource, returned by one of the image creation functions, such as imagecreatetruecolor().

filtertype

filtertype can be one of the following:

  • IMG_FILTER_NEGATE: Reverses all colors of the image.
  • IMG_FILTER_GRAYSCALE: Converts the image into grayscale.
  • IMG_FILTER_BRIGHTNESS: Changes the brightness of the image. Use arg1 to set the level of brightness.
  • IMG_FILTER_CONTRAST: Changes the contrast of the image. Use arg1 to set the level of contrast.
  • IMG_FILTER_COLORIZE: Like IMG_FILTER_GRAYSCALE, except you can specify the color. Use arg1, arg2 and arg3 in the form of red, green, blue and arg4 for the alpha channel. The range for each color is 0 to 255.
  • IMG_FILTER_EDGEDETECT: Uses edge detection to highlight the edges in the image.
  • IMG_FILTER_EMBOSS: Embosses the image.
  • IMG_FILTER_GAUSSIAN_BLUR: Blurs the image using the Gaussian method.
  • IMG_FILTER_SELECTIVE_BLUR: Blurs the image.
  • IMG_FILTER_MEAN_REMOVAL: Uses mean removal to achieve a "sketchy" effect.
  • IMG_FILTER_SMOOTH: Makes the image smoother. Use arg1 to set the level of smoothness.
  • IMG_FILTER_PIXELATE: Applies pixelation effect to the image, use arg1 to set the block size and arg2 to set the pixelation effect mode.

arg1

  • IMG_FILTER_BRIGHTNESS: Brightness level.
  • IMG_FILTER_CONTRAST: Contrast level.
  • IMG_FILTER_COLORIZE: Value of red component.
  • IMG_FILTER_SMOOTH: Smoothness level.
  • IMG_FILTER_PIXELATE: Block size in pixels.

arg2

  • IMG_FILTER_COLORIZE: Value of green component.
  • IMG_FILTER_PIXELATE: Whether to use advanced pixelation effect or not (defaults to FALSE).

arg3

  • IMG_FILTER_COLORIZE: Value of blue component.

arg4

  • IMG_FILTER_COLORIZE: Alpha channel, A value between 0 and 127. 0 indicates completely opaque while 127 indicates completely transparent.

Return Values

Returns TRUE on success or FALSE on failure.

Changelog

Version Description
5.3.0 Pixelation support (IMG_FILTER_PIXELATE) was added.
5.2.5 Alpha support for IMG_FILTER_COLORIZE was added.

Examples

Example #1 imagefilter() grayscale example

<?php
$im 
imagecreatefrompng('dave.png');

if(
$im && imagefilter($imIMG_FILTER_GRAYSCALE))
{
    echo 
'Image converted to grayscale.';

    
imagepng($im'dave.png');
}
else
{
    echo 
'Conversion to grayscale failed.';
}

imagedestroy($im);
?>

Example #2 imagefilter() brightness example

<?php
$im 
imagecreatefrompng('sean.png');

if(
$im && imagefilter($imIMG_FILTER_BRIGHTNESS20))
{
    echo 
'Image brightness changed.';

    
imagepng($im'sean.png');
    
imagedestroy($im);
}
else
{
    echo 
'Image brightness change failed.';
}
?>

Example #3 imagefilter() colorize example

<?php
$im 
imagecreatefrompng('philip.png');

/* R, G, B, so 0, 255, 0 is green */
if($im && imagefilter($imIMG_FILTER_COLORIZE02550))
{
    echo 
'Image successfully shaded green.';

    
imagepng($im'philip.png');
    
imagedestroy($im);
}
else
{
    echo 
'Green shading failed.';
}
?>

Example #4 imagefilter() negate example

<?php
// Define our negate function so its portable for 
// php versions without imagefilter()
function negate($im)
{
    if(
function_exists('imagefilter'))
    {
        return 
imagefilter($imIMG_FILTER_NEGATE);
    }

    for(
$x 0$x imagesx($im); ++$x)
    {
        for(
$y 0$y imagesy($im); ++$y)
        {
            
$index imagecolorat($im$x$y);
            
$rgb imagecolorsforindex($index);
            
$color imagecolorallocate($im255 $rgb['red'], 255 $rgb['green'], 255 $rgb['blue']);

            
imagesetpixel($im$x$y$color);
        }
    }

    return(
true);
}

$im imagecreatefromjpeg('kalle.jpg');

if(
$im && negate($im))
{
    echo 
'Image successfully converted to negative colors.';

    
imagejpeg($im'kalle.jpg'100);
    
imagedestroy($im);
}
else
{
    echo 
'Converting to negative colors failed.';
}
?>

Example #5 imagefilter() pixelate example

<?php
// Load the PHP logo, we need to create two instances 
// to show the differences
$logo1 imagecreatefrompng('./php.png');
$logo2 imagecreatefrompng('./php.png');

// Create the image instance we want to show the 
// differences on
$output imagecreatetruecolor(imagesx($logo1) * 2imagesy($logo1));

// Apply pixelation to each instance, with a block 
// size of 3
imagefilter($logo1IMG_FILTER_PIXELATE3);
imagefilter($logo2IMG_FILTER_PIXELATE3true);

// Merge the differences onto the output image
imagecopy($output$logo10000imagesx($logo1) - 1imagesy($logo1) - 1);
imagecopy($output$logo2imagesx($logo2), 000imagesx($logo2) - 1imagesy($logo2) - 1);
imagedestroy($logo1);
imagedestroy($logo2);

// Output the differences
header('Content-Type: image/png');
imagepng($output);
imagedestroy($output);
?>

The above example will output something similar to:

Output of example : imagefilter() pixelate

Notes

See Also

Коментарии

From what i have been able to find from this function, it accepts the following arguments:
        IMG_FILTER_NEGATE
        IMG_FILTER_GRAYSCALE
        IMG_FILTER_EDGEDETECT
        IMG_FILTER_GAUSSIAN_BLUR
        IMG_FILTER_SELECTIVE_BLUR
        IMG_FILTER_EMBOSS
        IMG_FILTER_MEAN_REMOVAL

The following arguments need one or more arguments.
        IMG_FILTER_SMOOTH, -1924.124
        IMG_FILTER_COLORIZE, -127.12, -127.98, 127
        IMG_FILTER_CONTRAST, -90
        IMG_FILTER_BRIGHTNESS, 98
       
I haven't tested them all, the names speak for themselves.
2004-07-20 21:26:03
http://php5.kiev.ua/manual/ru/function.imagefilter.html
Examples using imagefilter():

<?php
$im 
imagecreatefrompng('dave.png');
if (
$im && imagefilter($imIMG_FILTER_GRAYSCALE)) {
    echo 
'Image converted to grayscale.';
   
imagepng($im'dave.png');
} else {
    echo 
'Conversion to grayscale failed.';
}

imagedestroy($im);
?>

/////////////////////////////

<?php
$im 
imagecreatefrompng('sean.png');
if (
$im && imagefilter($imIMG_FILTER_BRIGHTNESS20)) {
    echo 
'Image brightness changed.';
   
imagepng($im'sean.png');
} else {
    echo 
'Image brightness change failed.';
}

imagedestroy($im);
?>

/////////////////////////////

<?php
$im 
imagecreatefrompng('philip.png');

/* R, G, B, so 0, 255, 0 is green */
if ($im && imagefilter($imIMG_FILTER_COLORIZE02550)) {
    echo 
'Image successfully shaded green.';
   
imagepng($im'philip.png');
} else {
    echo 
'Green shading failed.';
}

imagedestroy($im);
?>
2004-09-04 16:36:16
http://php5.kiev.ua/manual/ru/function.imagefilter.html
http://www.hudzilla.org/phpbook/read.php/11_2_15
for more detailed info, and some <i>arg</i> guidelines.
2005-12-20 14:48:10
http://php5.kiev.ua/manual/ru/function.imagefilter.html
for a quick, ok-looking, sepia-effect (also in php4) I just use this little fellow, since a real implementation of sepia was just way too slow.

function pseudosepia(&$im,$percent){
      $sx=imagesx($im);
      $sy=imagesy($im);
      $filter=imagecreatetruecolor($sx,$sy);
      $c=imagecolorallocate($filter,100,50,50);
      imagefilledrectangle($filter,0,0,$sx,$sy,$c);
      imagecopymerge($im,$filter,0,0,0,0,$sx,$sy,$percent);
}
2006-01-31 08:53:07
http://php5.kiev.ua/manual/ru/function.imagefilter.html
A colorize algorithm wich preserves color luminosity (i.e black 
will output black, and white will output white).
This works in PHP4 and is great for customizing interfaces 
dinamically.

<?php
function colorize($img_src,$img_dest$r$g$b
{
if(!
$im imagecreatefromgif($img_src))
  return 
"Could not use image $img_src"
   
//We will create a monochromatic palette based on
//the input color
//which will go from black to white
//Input color luminosity: this is equivalent to the 
//position of the input color in the monochromatic
//palette
$lum_inp=round(255*($r+$g+$b)/765); //765=255*3

//We fill the palette entry with the input color at its 
//corresponding position

$pal[$lum_inp]['r']=$r;
$pal[$lum_inp]['g']=$g;
$pal[$lum_inp]['b']=$b;

//Now we complete the palette, first we'll do it to
//the black,and then to the white.

//FROM input to black
//===================
//how many colors between black and input
$steps_to_black=$lum_inp;       

//The step size for each component
if($steps_to_black)
 {
 
$step_size_red=$r/$steps_to_black;   
 
$step_size_green=$g/$steps_to_black;   
 
$step_size_blue=$b/$steps_to_black;   
 }

for(
$i=$steps_to_black;$i>=0;$i--)
 {
 
$pal[$steps_to_black-$i]['r']=$r-round($step_size_red*$i);
 
$pal[$steps_to_black-$i]['g']=$g-round($step_size_green*$i);
 
$pal[$steps_to_black-$i]['b']=$b-round($step_size_blue*$i);
 }

//From input to white:
//===================
//how many colors between input and white
$steps_to_white=255-$lum_inp;

if(
$steps_to_white)
  {
 
$step_size_red=(255-$r)/$steps_to_white;   
 
$step_size_green=(255-$g)/$steps_to_white;   
 
$step_size_blue=(255-$b)/$steps_to_white;   
  }
 else
 
$step_size_red=$step_size_green=$step_size_blue=0;

 
//The step size for each component
 
for($i=($lum_inp+1);$i<=255;$i++)
  {
 
$pal[$i]['r']=$r round($step_size_red*($i-$lum_inp));
 
$pal[$i]['g']=$g round($step_size_green*($i-$lum_inp));
 
$pal[$i]['b']=$b round($step_size_blue*($i-$lum_inp));
  }
//--- End of palette creation

//Now,let's change the original palette into the one we
//created
for($c 0$c $palette_size$c++)
 { 
 
$col imagecolorsforindex($im$c);         
 
$lum_src=round(255*($col['red']+$col['green']
                +
$col['blue'])/765);
 
$col_out=$pal[$lum_src];
 
imagecolorset($im$c$col_out['r'], 
                               
$col_out['g'],
                               
$col_out['b']);
 }

 
//save the image file
 
imagepng($im,$img_dest);
 
imagedestroy($im);
}
//end function colorize
?>
2006-02-27 13:37:34
http://php5.kiev.ua/manual/ru/function.imagefilter.html
This routine was just what I was looking for, I wanted web admin users to be able to recolour their uploaded photos (to go with a news item) either a blue tint or sepia to match the appearance of other colours used on the website. 

Using a form with a select box containing the RGB values, I can give them the option of either of the two tints or no colourization at all, plus resize their images to the viewing size and a thumbnail image on the fly without having to use any other image editing software.
2006-08-03 17:16:54
http://php5.kiev.ua/manual/ru/function.imagefilter.html
Автор:
The documentation misses the exact meaning and valid ranges of the arguments for ImageFilter(). According to the 5.2.0 sources the arguments are:
IMG_FILTER_BRIGHTNESS
-255 = min brightness, 0 = no change, +255 = max brightness

IMG_FILTER_CONTRAST
-100 = max contrast, 0 = no change, +100 = min contrast (note the direction!)

IMG_FILTER_COLORIZE
Adds (subtracts) specified RGB values to each pixel. The valid range for each color is -255...+255, not 0...255. The correct order is red, green, blue.
-255 = min, 0 = no change, +255 = max
This has not much to do with IMG_FILTER_GRAYSCALE.

IMG_FILTER_SMOOTH
Applies a 9-cell convolution matrix where center pixel has the weight arg1 and others weight of 1.0. The result is normalized by dividing the sum with arg1 + 8.0 (sum of the matrix).
any float is accepted, large value (in practice: 2048 or more) = no change

ImageFilter seem to return false if the argument(s) are out of range for the chosen filter.
2007-01-14 08:55:15
http://php5.kiev.ua/manual/ru/function.imagefilter.html
It appears that imagefilter doesn't play nice with apha. If you run an imagefilter on a transparent image it'll return a black image...similar to a lot of Photoshop plugins do.
2007-02-14 14:31:38
http://php5.kiev.ua/manual/ru/function.imagefilter.html
If you're looking for fast sepia effect that can be used for on-the-fly thumbnails generation you can't use sophisticated functions. The faster and much better way than described by webmaster at qudi dot de in the note from 31-Jan-2006 is applying colorize filter AFTER grayscale.

<?php

(...)

imagefilter($yourimageIMG_FILTER_GRAYSCALE); imagefilter($yourimageIMG_FILTER_COLORIZE906040); 

(...)

?>

I used (90,60,40) for my sepia after couple of tests, however, if you need darker or lighter just check what suits you best.
2007-03-16 11:26:58
http://php5.kiev.ua/manual/ru/function.imagefilter.html
This will only work if you have php5. For php4, you'll have to use the sepia function set webmaster at qudi dot de suggested.
2007-05-08 03:56:40
http://php5.kiev.ua/manual/ru/function.imagefilter.html
Here's a page that shows the different filters in action
http://www.phpied.com/image-fun-with-php-part-2/
Also shows some quick ways to do sepia.
2007-11-13 02:31:13
http://php5.kiev.ua/manual/ru/function.imagefilter.html
Note: applying IMG_FILTER_EMBOSS to text and using in a customization to the CAPTCHA image script in phpBB or a project of your own is a very good way to stop OCR-ing bots from getting through. Embossed serif fonts are fairly easy for the human eye to understand but to an OCR script it is extremely difficult because it seems to give it the illusion of 3D. 

If you only allocate 2 or 3 colours in the image, it uses the background colour alot in the embossed text, which greatly contributes to this.

I made my own custom CAPTCHA script to stop phpBB post spam for a client site I was developing and I have gone from getting 2-3 new spam users created every day to zero.

Anything with the source code freely available out there right now is possible to be defeated by spammers once one of them stars sharing code with the other spammers, but if you run something at least someone custom, their bots will pass you over.
2007-11-21 10:11:45
http://php5.kiev.ua/manual/ru/function.imagefilter.html
Function to change the transparency of a png image on the fly. Works only with PNG, and with a browser supporting alpha channel.
The function stretches the opacity-range of the image, so that the most opaque pixel(s) will be set to the given opacity. (Other opacity values in pixels are modified accordingly.)
Returns success or failure.

<?php
function filter_opacity( &$img$opacity //params: image resource id, opacity in percentage (eg. 80)
       
{
            if( !isset( 
$opacity ) )
                { return 
false; }
           
$opacity /= 100;
           
           
//get image width and height
           
$w imagesx$img );
           
$h imagesy$img );
           
           
//turn alpha blending off
           
imagealphablending$imgfalse );
           
           
//find the most opaque pixel in the image (the one with the smallest alpha value)
           
$minalpha 127;
            for( 
$x 0$x $w$x++ )
                for( 
$y 0$y $h$y++ )
                    {
                       
$alpha = ( imagecolorat$img$x$y ) >> 24 ) & 0xFF;
                        if( 
$alpha $minalpha )
                            { 
$minalpha $alpha; }
                    }
           
           
//loop through image pixels and modify alpha for each
           
for( $x 0$x $w$x++ )
                {
                    for( 
$y 0$y $h$y++ )
                        {
                           
//get current alpha value (represents the TANSPARENCY!)
                           
$colorxy imagecolorat$img$x$y );
                           
$alpha = ( $colorxy >> 24 ) & 0xFF;
                           
//calculate new alpha
                           
if( $minalpha !== 127 )
                                { 
$alpha 127 127 $opacity * ( $alpha 127 ) / ( 127 $minalpha ); }
                            else
                                { 
$alpha += 127 $opacity; }
                           
//get the color index with new alpha
                           
$alphacolorxy imagecolorallocatealpha$img, ( $colorxy >> 16 ) & 0xFF, ( $colorxy >> ) & 0xFF$colorxy 0xFF$alpha );
                           
//set pixel with the new color + opacity
                           
if( !imagesetpixel$img$x$y$alphacolorxy ) )
                                { return 
false; }
                        }
                }
            return 
true;
        }
?>

Example for use:

 <?php
  $image 
imagecreatefrompng"img.png" );
 
filter_opacity$image75 );
 
header"content-type: image/png" );
 
imagepng$image );
 
imagedestroy$image );
?>
2008-03-29 14:16:43
http://php5.kiev.ua/manual/ru/function.imagefilter.html
Searching for a way to easily change the color of the image, I tried IMG_FILTER_COLORIZE. I was unable to get the quality results I wanted. It turns out PHP's Colorize is the equivalent of Photoshop's "Linear Dodge" layer filter. 

Hue adjustments have always worked well for me, so I figured I could try with PHP.
This function is kind of slow on larger images, but on small images like what I'm using it for, the difference is trivial.

The script calculates the ratio or red, to green, to blue in the color provided, then scales the image appropriately... unfortunately, it does it pixel by pixel.

Here's a demo and comparison of this function, to photoshop's hue function, to PHP's colorize. http://img146.imageshack.us/img146/3167/imagefilterhuedemo.png

<?php
function imagefilterhue($im,$r,$g,$b){
   
$rgb $r+$g+$b;
   
$col = array($r/$rgb,$b/$rgb,$g/$rgb);
   
$height imagesy($im);
   
$width imagesx($im);
    for(
$x=0$x<$width$x++){
        for(
$y=0$y<$height$y++){
           
$rgb ImageColorAt($im$x$y);
           
$r = ($rgb >> 16) & 0xFF;
           
$g = ($rgb >> 8) & 0xFF;
           
$b $rgb 0xFF;
           
$newR $r*$col[0] + $g*$col[1] + $b*$col[2];
           
$newG $r*$col[2] + $g*$col[0] + $b*$col[1];
           
$newB $r*$col[1] + $g*$col[2] + $b*$col[0];
           
imagesetpixel($im$x$y,imagecolorallocate($im$newR$newG$newB));
        }
    }
}
header ("Content-type: image/jpeg");
$im imagecreatefromjpeg("test.jpg");

// Usage: Just as imagefilter(), except with no filtertype.
// imagefilterhue(resource $image, int $red, int $green , int $blue)
imagefilterhue($im,2,70,188);

// The equivalent with colorize, as tested in demo image: imagefilter($im, IMG_FILTER_COLORIZE, 2, 70, 188);

imagejpeg($im);
?>
2009-06-25 14:11:21
http://php5.kiev.ua/manual/ru/function.imagefilter.html
IMG_FILTER_COLORIZE doesn't seem to work on palette image, here's a way to achieve same result with palette image:

<?php
//$color is an array containing rvb infos (ie: array(255,80,0))
function paletteColorize($imgResource,array $color){
   
$nbColors imagecolorstotal($imgResource);
    for(
$i=0$i<$nbColors$i++){
       
$c array_values(imagecolorsforindex($imgRes,$i));
        for(
$y=0;$y<3;$y++)
           
$c[$y] = max(0,min(255,$c[$y]+$color[$y]));
       
imagecolorset($imgResource,$i,$c[0],$c[1],$c[2]);
    }
}
?>

Here's also a function that work on both truecolor and palette images that try to do something similar to greyscale with a given color
<?php
function colorScale($imgRes,array $color){
       
imagefilter($imgRes,IMG_FILTER_GRAYSCALE);
       
$color self::_read_color($color);
       
$luminance=($color[0]+$color[1]+$color[2])/3// average luminance added by the color
       
$brightnessCorrection $luminance/3// quantity of brightness to correct for each channel
       
if( $luminance 127 ){
           
$brightnessCorrection -= 127/3// color is dark so we have to negate the brightness correction 
       
}
        if(! 
imageistruecolor($imgRes) ){
           
$nbColors imagecolorstotal($imgRes);
            for(
$i=0$i<$nbColors$i++){
               
$c array_values(imgagecolorsforindex($imgRes,$i));
                for(
$y=0;$y<3;$y++){
                   
$c[$y] = max(0min(255$c[$y] + ($color[$y]-$luminance) + $brightnessCorrection) ); // parentheses just for better comprehension
               
}
               
imagecolorset($omgRes,$i,$c[0],$c[1],$c[2]);
            }
        }else{ 
// much easier with truecolor
           
imagefilter($imgResIMG_FILTER_COLORIZE$color[0]-$luminance$color[1]-$luminance$color[2]-$luminance);
           
imagefilter($imgResIMG_FILTER_BRIGHTNESS$brightnessCorrection);
        }
}
?>

with hope that someone will find this useful
2010-11-30 08:38:06
http://php5.kiev.ua/manual/ru/function.imagefilter.html
a function to make all colors gray except the only one
i made it myself so the code is note so beautiful )

<?php
function imagecolorfilter($im){
   
   
$height imagesy($im);
   
$width imagesx($im);
    for(
$x=0$x<$width$x++){
        for(
$y=0$y<$height$y++){
           
$rgb ImageColorAt($im$x$y);
           
$r = ($rgb >> 16) & 0xFF;
           
$g = ($rgb >> 8) & 0xFF;
           
$b $rgb 0xFF;
           
$c=($r+$g+$b)/3;
           
//if($g<$r || $g<$b+20){$r=$c;$g=$c; $b=$c;}//leaves only green 
//if($b<$r || $b<$g){$r=$c;$g=$c; $b=$c;}//only blue
if($r<$g+30 || $r<$b){$r=$c;$g=$c$b=$c;}//only red
//if($r<$g-1 || $r>$g+60 || $b>$g-50){$r=$c;$g=$c; $b=$c;}//only yellow
           
           
imagesetpixel($im$x$y,imagecolorallocate($im$r,$g,$b));
        }
    }
}

header ("Content-type: image/jpeg");
$im imagecreatefromjpeg("image.jpg");
imagecolorfilter($im);
imagejpeg($im);
?>
2011-03-17 02:26:41
http://php5.kiev.ua/manual/ru/function.imagefilter.html
For people looking to apply a 'multiply' effect on images like the one in Photoshop (generally b&w ones), you can achieve it with the IMG_FILTER_COLORIZE filter.

<?php
function multiplyColor(&$im$color = array(25500))
{
   
//get opposite color
   
$opposite = array(255 $color[0], 255 $color[1], 255 $color[2]);

   
//now we subtract the opposite color from the image
   
imagefilter($imIMG_FILTER_COLORIZE, -$opposite[0], -$opposite[1], -$opposite[2]);
}
?>
2011-06-21 09:58:48
http://php5.kiev.ua/manual/ru/function.imagefilter.html
// With transparent PNG file you can colorize the "positive" items and stand the transparent has it is - Beta code

<?php
header
('Content-Type: image/png');

$im imagecreatefrompng('image.png');
$width imagesx($im);
$height imagesy($im);
$imn imagecreatetruecolor($width$height);
imagealphablending($imn,false);
$col=imagecolorallocatealpha($imn,255,255,255,127);
imagesavealpha($imn,true);
imagefilledrectangle($imn,0,0,$width,$height,$col);
imagealphablending($imn,true);
imagecopy($imn$im0000$width$height);
imagefilter($imnIMG_FILTER_NEGATE);

// FOR A TRANSPARENT PNG FILE WITH SOMETHING INSIDE, YOU CAN CHANGE THE COLOR HERE: I HAVE RGB: 0, 255, 0
imagefilter($imnIMG_FILTER_COLORIZE02550);

imagepng($imn);
imagedestroy($imn);

?>
2011-10-29 10:20:20
http://php5.kiev.ua/manual/ru/function.imagefilter.html
a function to create nice vignette effect:

<?php

function vignette($im){
    global 
$width$height;   
   
$width imagesx($im);
   
$height imagesy($im);

    function 
effect($x$y, &$rgb){
        global 
$width$height;   
           
       
$sharp 0.4// 0 - 10 small is sharpnes, 
       
$level 0.7// 0 - 1 small is brighter

       
$l sin(M_PI $width $x) * sin(M_PI $height $y);
       
$l pow($l$sharp);
       
       
$l $level * ($l);
       
       
$rgb['red'] *= $l;
       
$rgb['green'] *= $l;
       
$rgb['blue'] *= $l;
    }

    for(
$x 0$x imagesx($im); ++$x){
        for(
$y 0$y imagesy($im); ++$y){   
           
$index imagecolorat($im$x$y);
           
$rgb imagecolorsforindex($im$index);
           
effect($x$y$rgb);
           
$color imagecolorallocate($im$rgb['red'], $rgb['green'], $rgb['blue']);

           
imagesetpixel($im$x$y$color);   
        }
    }
    return(
true);
}

$im imagecreatefromjpeg('cars7_134.jpg');

if(
$im and vignette($im)){
   
header('Content-Type: image/jpeg');
   
imagejpeg($im);
   
imagedestroy($im);
}else{
    echo 
'Vignette failed.';
}
?>
2012-08-23 16:11:24
http://php5.kiev.ua/manual/ru/function.imagefilter.html
Simple pixelate function, just in case you are < 5.3

<?php
function pixelate(&$image$pixelsize){
   
$maxX imagesx($image);
   
$maxY imagesy($image);
   
$rad=floor($pixelsize/2);
    for(
$x=$rad;$x<$maxX;$x+=$pixelsize)
        for(
$y=$rad;$y<$maxY;$y+=$pixelsize){
           
$color imagecolorat($image$x$y);
           
imagefilledrectangle ($image$x-$rad$y-$rad$x+$pixelsize-1$y+$pixelsize-1,$color);
        }
}
?>
2012-10-17 20:34:14
http://php5.kiev.ua/manual/ru/function.imagefilter.html
Автор:
I played with IMG_FILTER_SMOOTH and tried some negative
values.

-1 to -7: looks like a mix of smoothness and edgedetect

-8: image seems to be completely broken

-9 and lower: kind of sharpening effect (-9 sharper than -10)

I think the sharpening effect in particular could be useful.
2012-12-08 21:29:47
http://php5.kiev.ua/manual/ru/function.imagefilter.html
Here is an alternative to IMG_FILTER_COLORIZE filter, but taking the alpha parameter of each pixel in account.

<?php
function rgba_colorize($img$color)
{
   
imagesavealpha($imgtrue);
   
imagealphablending($imgtrue);

   
$img_x imagesx($img);
   
$img_y imagesy($img);
    for (
$x 0$x $img_x; ++$x)
    {
        for (
$y 0$y $img_y; ++$y)
        {
           
$rgba imagecolorsforindex($imgimagecolorat($img$x$y));
           
$color_alpha imagecolorallocatealpha($img$color[0], $color[1], $color[2], $rgba['alpha']);
           
imagesetpixel($img$x$y$color_alpha);
           
imagecolordeallocate($img$color_alpha);
        }
    }
}
?>
2013-08-22 17:04:38
http://php5.kiev.ua/manual/ru/function.imagefilter.html
filtertype is an integer. So if you want to use it as a variable and need to use, e.g. preg_match function you can do it in this way:

<?php
    $filter 
IMG_FILTER_BRIGHTNESS;
    if( 
preg_match'/^[0-9]{1,2}$/'$filter ) )
    {
       
//Do something
   
}
?>

The order of the filtertypes in this manual determines the number of each filter, from 0 to 11. E.g. IMG_FILTER_NEGATE=0.
2014-02-01 16:25:24
http://php5.kiev.ua/manual/ru/function.imagefilter.html
I needed an especially strong blur effect today and had a hard time achieving adequate results with the built-in IMG_FILTER_GAUSSIAN_BLUR filter. In order to achieve the strength of the blur I required I had to repeat the filter up to  100 times, which took way too long to be acceptable.

After a bit of searching, I found this answer to be quite a good solution to this problem: http://stackoverflow.com/a/20264482

Based on that technique, I wrote the following generic function to achieve a very strong blur in a reasonable amount of processing:

<?php 

/**
 * Strong Blur
 *
 * @param resource $gdImageResource 
 * @param int $blurFactor optional 
 *  This is the strength of the blur
 *  0 = no blur, 3 = default, anything over 5 is extremely blurred
 * @return GD image resource
 * @author Martijn Frazer, idea based on http://stackoverflow.com/a/20264482
 */
function blur($gdImageResource$blurFactor 3)
{
 
// blurFactor has to be an integer
 
$blurFactor round($blurFactor);
 
 
$originalWidth imagesx($gdImageResource);
 
$originalHeight imagesy($gdImageResource);

 
$smallestWidth ceil($originalWidth pow(0.5$blurFactor));
 
$smallestHeight ceil($originalHeight pow(0.5$blurFactor));

 
// for the first run, the previous image is the original input
 
$prevImage $gdImageResource;
 
$prevWidth $originalWidth;
 
$prevHeight $originalHeight;

 
// scale way down and gradually scale back up, blurring all the way
 
for($i 0$i $blurFactor$i += 1)
  {   
   
// determine dimensions of next image
   
$nextWidth $smallestWidth pow(2$i);
   
$nextHeight $smallestHeight pow(2$i);

   
// resize previous image to next size
   
$nextImage imagecreatetruecolor($nextWidth$nextHeight);
   
imagecopyresized($nextImage$prevImage0000
     
$nextWidth$nextHeight$prevWidth$prevHeight);

   
// apply blur filter
   
imagefilter($nextImageIMG_FILTER_GAUSSIAN_BLUR);

   
// now the new image becomes the previous image for the next step
   
$prevImage $nextImage;
   
$prevWidth $nextWidth;
     
$prevHeight $nextHeight;
  }

 
// scale back to original size and blur one more time
 
imagecopyresized($gdImageResource$nextImage
   
0000$originalWidth$originalHeight$nextWidth$nextHeight);
 
imagefilter($gdImageResourceIMG_FILTER_GAUSSIAN_BLUR);

 
// clean up
 
imagedestroy($prevImage);

 
// return result
 
return $gdImageResource;
}
?>
2014-04-01 20:03:36
http://php5.kiev.ua/manual/ru/function.imagefilter.html
PHP Sepia Effect

  $myImage = imagecreatefromjpeg($f);
  imagefilter($myImage,IMG_FILTER_GRAYSCALE);
  imagefilter($myImage,IMG_FILTER_BRIGHTNESS,-30);
  imagefilter($myImage,IMG_FILTER_COLORIZE, 90, 55, 30); 
  header("Content-type: image/jpeg");
  imagejpeg($myImage );
  imagejpeg($myImage,$f);
  imagedestroy( $myImage );
2016-03-18 12:39:14
http://php5.kiev.ua/manual/ru/function.imagefilter.html

    Поддержать сайт на родительском проекте КГБ